Roland BOSS GT-PRO Bedienungsanleitung

GT-PRO

Guitar Effects

Processor

TurboStart

www.RolandUS.com

Page 1

Welcome

Congratulations on your purchase of the BOSS

GT-PRO. This TurboStart contains step-by-step

instructions that will quickly introduce you to the

GT-PRO’s major features.

Setting Up the GT-PRO’s Main Outputs

For optimal sound, configure the GT-PRO’s main

outputs for the device to which they’re connected:

1. Press OUTPUT SELECT so it's lit.

2. Turn the PATCH/VALUE dial to choose the

desired option:

Select:

When you’re connected to:

JC-120

a Roland JC-120 input.

SMALL AMP

a small, or "practice," guitar

amp input.

COMBO AMP

a Combo Amp input.

STACK AMP

a Stack Amp input.

JC-120 Return

the effects return jack of a

Roland JC-120 amp.

COMBO

Return

the effects return jack of a

Combo Amp.

STACK Return

the effects return jack of a

stack amp.

LINE/PHONES

headphones, a mixer or

recording device input.

3. Press EXIT when you’re finished.

Selecting Patches

A patch is a group of selected effect combinations

along with their individual settings. There are 200

user patches and 200 preset patches in the GT-PRO.

Patches are organized in banks of 10. The user

banks contain Patches U1-1 through U20-10. The

preset banks contain patches P21-1 through P40-10.

Use the following steps to select a patch:

1. Confirm you’re in the main (play) menu by

pressing EXIT a few times.

2. Turn the PATCH/VALUE dial clockwise or

counterclockwise. To scroll through banks

quickly, press SHIFT so it’s lit, and then turn the

PATCH/VALUE dial.

Clearing a Patch (Initialization)

You can clear, or “initialize,” any user patch. This can

be handy when you want to build a patch from

scratch and want to start with a clean slate. Use the

following steps to initialize a user patch.

Note: Initializing completely resets the parameters of

the selected patch. If you’ve edited the current patch

and want to keep your edits, be sure to write the

patch to another user memory location—as described

on the next page—before initializing.

1. Turn the PATCH/VALUE dial to select the user

patch you’d like to initialize.

2. Press the WRITE button.

3. Press the PARAMETER button twice—“INIT”

appears in the display. To cancel the initialization

process at this point, press EXIT.

4. Press WRITE. The patch is now initialized.

Editing a Patch

Any patch in the GT-PRO can be edited to your

liking. Use the following steps to edit a patch. In this

example, we’ll turn on and adjust the parameters of

the delay, chorus, and noise suppressor.

1. Turn the PATCH/VALUE dial to select a patch.

2. Press the DELAY button until “Delay On”

appears the display, and then use the PATCH

VALUE dial and PARAMETER buttons to

adjust the delay parameters as desired.

3. Press the CHORUS button until “Chorus On”

appears in the display, and then use the PATCH

VALUE dial and PARAMETER buttons to

adjust the Chorus parameters.

Tip: Press any effect button twice to toggle its effect

on and off.

4. Press MASTER until “NOISE SUPPRESSOR”

appears in the display. If the noise suppressor is

off, turn the PATCH/VALUE dial clockwise to

select ON. Use the PATCH/VALUE dial and

PARAMETER buttons to adjust the noise

suppressor parameters.

5. When you’re finished, press EXIT.

GT-PRO

Guitar Effects

Processor

TurboStart

www.RolandUS.com

Page 2

Saving a Patch (Patch Write)

Once you’ve edited a patch, you must write it to one

of the 200 user locations to save your work. Follow

these steps to write a patch:

1. When you’re finished editing a patch, press the

WRITE button.

2. Turn the PATCH/VALUE dial to select a user

location from 1/1 to 20/10.

3. Press the WRITE button again.

The FX Chain (Effects Chain)

Changing the order of effects is done within the “FX

Chain” of the GT-PRO. Positioning an effect before or

after another can significantly change the character

of a patch. Use the following steps to move an effect

within the FX Chain:

1. Press the NAME/FX CHAIN button until “Effect

Chain” appears.

2. Press PARAMETER  to place the stick-

figure cursor at the location to which you want to

move the effect.

3. Once you’ve chosen the desired position, press

the button belonging to the effect you want to

move.

4. Repeat Steps 2-3 for any other effects you’d like

to re-position.

5. When you’re finished, press EXIT to return to the

main (play) menu. If you want to save the

changes you’ve made, follow the steps in

“Saving a Patch” above.

Andere Roland Aufnahmegeräte Handbücher

Roland

Roland A-33 Bedienungsanleitung

Roland

Roland MV-8800 Production Studio Installations- und Betriebshandbuch

Roland

Roland Cakewalk UA-25 EX Bedienungsanleitung

Roland

Roland XV-3080 Bedienungs- und Wartungshandbuch

Roland

Roland DSD-2 Bedienungsanleitung

Roland

Roland GT-8 Bedienungsanleitung

Roland

Roland SDE-1000 Bedienungsanleitung

Roland

Roland cakewalk A-300PRO Bedienungs- und Wartungshandbuch

Roland

Roland EF-303 Bedienungsanleitung

Roland

Roland V-Bass Bedienungsanleitung

Roland

Roland SR-20HD Bedienungsanleitung

Roland

Roland MSQ-700 Bedienungsanleitung

Roland

Roland GK-3B Bedienungsanleitung

Roland

Roland RA-90 Bedienungsanleitung

Roland

Roland RE-100 Bedienungsanleitung

Roland

Roland R1000 series E20 Bedienungsanleitung

Roland

Roland SPD-S Bedienungsanleitung

Roland

Roland SC-880 Bedienungsanleitung

Roland

Roland MPU-IPC-T Bedienungsanleitung

Roland

Roland Quad-Capture Bedienungsanleitung

Roland

Roland Compu Rhythm CR-68 Bedienungsanleitung

Roland

Roland AF-70 Bedienungsanleitung

Roland

Roland TR-08 Bedienungsanleitung

Roland

Roland CDR-88RW-4 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch