Roland MV-8000 Bedienungsanleitung

Owner’s Manual

This manual explains how to use an MV-8000 in which “System Program Version 3.50 is

installed.

About the symbols and icons in this manual

●

Text in square brackets [ ] refers to buttons on the panel of the MV-8000.

Buttons indicated as [F1 (sample)] refer to the F1 (function 1) button when the F1 function

shown in the LCD is “Sample.”

●

Where a range of values is shown, the default value is printed in bold type.

For example, an indication of

Range:

, 67, 72, 75 (Hz)

means that 60 Hz is the default value.

Indicates information that you should be aware of when using the MV-8000.

Indicates a convenient operation or useful music production technique.

Indicates supplementary information about an operation.

Indicates operation from the mouse and the external VGA display.

2005 Roland Corporation

written permission of ROLAND CORPORATION.

http://www.roland.com/

• Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY

INSTRUCTIONS” (Owner’s Manual p. 2), “USING THE UNIT SAFELY” (Owner’s Manual p. 3),

and “IMPORTANT NOTES” (Owner’s manual p. 5). These sections provide important

information concerning the proper operation of the unit. Additionally, in order to feel assured

that you have gained a good grasp of every feature provided by your new unit, Quick Start and

Owner’s Manual should be read in its entirety. The manual should be saved and kept on hand

as a convenient reference.

• The explanations in this manual include illustrations that depict what should typically be shown

by the display. Note, however, that your unit may incorporate a newer, enhanced version of the

system (e.g., includes newer sounds), so what you actually see in the display may not always

match what appears in the manual.

MV-8000v35_r_e 1 ページ２００５年１２月５日　月曜日　午後２時４２分

An overview of version 3.5

●

Mixer automation (p. 3)

Operations on the MIXER screen can now be recorded and recalled.

●

Track mute automation (p. 5)

Operations on the TRACK MUTE screen can now be recorded and recalled.

●

C-knob automation (p. 10)

Operations of the C-knob can now be recorded and recalled.

●

Transmit Program Changes to an external sound module (p. 12)

MIDI Program Changes can now be transmitted at the beginning of a Song or Pattern.

●

Pencil tool added (p. 13)

You can now enter note events on the VGA PIANO ROLL EDIT screen.

●

Continuous data generation and modification capability (p. 14)

You can now enter and edit data that has continuous values. This can be used to enter

automation data into MIDI tracks.

●

Three-band equalizer added (p. 16)

You can now use the equalizer to adjust the tone.

●

Import Patch Preview function added (p. 18)

You can now preview and audition before importing Patches.

●

MUTE CONTROL TRACK screen (p. 8)

●

TRACK SELECT popup (p. 9)

●

CREATE CONTINUOUS DATA popup (p. 14)

●

CHANGE CONTINUOUS DATA popup (p. 15)

●

MIXER (AUDIO TRACK EQ), MIXER (INSTRUMENTS PART 1-8 EQ),

MIXER (INSTRUMENTS PART 9-16 EQ) screen (p. 16)

Added functionality

Screens that have been added

MV-8000v35_r_e 2 ページ２００５年１２月５日　月曜日　午後２時４２分

Automating mixing operations

(Automation)

The operations of the mixer parameter on the MIXER screens can be recorded on the

sequencer (MIDI track).

Mixer operation data is recorded on a MIDI track as MIDI Control Change data. The

following table shows the data that can be recorded and played back, and the MIDI

Control Change numbers used for each type of data.

Access the SEQUENCE screen or the PATTERN screen.

Move the current time to the location at which you want to start recording

mixer operations.

Use to select the MIDI track on which you want to record the Mixer

Channel operations (movements).

Press (Track Param).

The TRACK PARAMETER popup will appear.

Automating operations of Mixer Channel

Mixer parameters that can be recorded and played

back

Parameters MIDI Control Change Number

Level 7 (Volume)

Pan 10 (Pan)

Reverb Send 91 (Reverb: Effect 1 Depth)

DlyCho Send 93 (Chorus: Effect 3 Depth)

Recording mixer operations for a Mixer Channel

You can’t record mixer

operations for multiple Mixer

Channels at the same time.

You can’t record operations of

the Output parameter, Mute

parameter, and EQ parameters

on the MIXER screens.

You can use the SEQUENCE

EDIT screen, the PATTERN

EDIT screen, or the EVENT

LIST screen to edit a MIDI

track on which you recorded

mixer operations.

MV-8000v35_r_e 3 ページ２００５年１２月５日　月曜日　午後２時４２分

Automating mixing operations (Automation)

Use the Output Assign parameter to select the Mixer Channel for which you

want to record/playback mixer operations.

The following table shows the Mixer Channel that can be recorded and played back.

Select the “AMix” for which you want to record mixer operation of Audio track.

Press and select the MIXER screen for which you want to record the

Mixer Channel.

Press .

[REC] (red) indicator will blink, and the RECORDING PARAMETER (MIDI) popup

will appear. Make recording settings as necessary.

Press .

[REC] (red) and [PLAY] (green) will light, and the RECORDING PARAMETER

(MIDI) popup will close. Use the sliders or VALUE dial to adjust the mixer

parameter values for the Mixer Channel you selected in step 5. The value changes

will be recorded on the MIDI track.

Press to stop recording.

[REC] and [PLAY] will go dark, and recording will stop.

Move the current time to the location at which the mixer operations were

recorded.

Press .

[PLAY] (green) will light. The Mixer parameters will change according to the data

recorded on the MIDI track.

Press to stop playback.

[PLAY] will go dark, and playback will stop.

Mixer Channel Value

AUX1 Mixer AUX1

AUX2 Mixer AUX2

AUX3 Mixer AUX3

AUX4 Mixer AUX4

Delay/Chorus Mixer DlyCho

Reverb Mixer Reverb

Audio Phrase Mixer A.Phrs

Input Mixer Input

Audio track 1-8 AMix *: (Audio track name)

“*” shows Track Number.

Playback mixer movements

When you delete an Audio

track, the Output Assign

parameter will be switched Off

for the MIDI track on which

you recorded the mixer

automation operations for that

track.

By changing the Output

Assign parameter setting for

the MIDI track on which you

recorded the mixer operations

to other Mixer Channel, you

can playback those same mixer

operations on a different Mixer

Channel.

MV-8000v35_r_e 4 ページ２００５年１２月５日　月曜日　午後２時４２分

Automating mixing operations (Automation)

Mute settings for each track can be recorded on the Mute Control Track and

played-back.

Hold down , and press .

The TRACK MUTE screen will appear.

Move the current time to the location at which you want to start recording

mute operations.

Press .

[REC] (red) indicator will blink, and the RECORDING PARAMETER (MUTE

CONTROL) popup will appear. Make recording settings as necessary.

• Count In

Specifies how recording will begin.

• Auto Punch

Recording will begin (punch-in) and end (punch-out) automatically at the time

locations you specify beforehand.

• Metronome Mode

Specifies when the metronome signal will be output.

Automating mute operations for each track

Recording mute operations

Value Explanation

Off

Recording will begin the moment you press [PLAY].

1 Meas

When you press [PLAY], a count-in will sound from one measure

earlier than the record-start location, and recording will begin at

the record-start location.

2 Meas

When you press [PLAY], a count-in will sound from two measures

earlier than the record-start location, and recording will begin at

the record-start location.

Wait Note Recording will begin the moment you press [PLAY].

Parameter Value

0001-01-000

– 9999-**-***

Out

0001-01-000

– 9999-**-***

Value Explanation

Off The metronome will not sound.

Rec Only The metronome will sound only during recording.

Play&Rec The metronome will sound during playback and recording.

Always The metronome will always sound.

MV-8000v35_r_e 5 ページ２００５年１２月５日　月曜日　午後２時４２分

Automating mixing operations (Automation)

• Input Quantize

You can record into the sequencer while applying quantization.

Value: Off, (60), (80),

(120)

, (160), (240), (320), (480)

Press .

[REC] (red) and [PLAY] (green) will light, and the RECORDING PARAMETER

(MUTE CONTROL) popup will close. Strike the velocity pads to perform track mute

operations. Mute operations will be recorded on the Mute Control Track.

Press to stop recording.

[REC] and [PLAY] will go dark, and recording will stop.

Access the SEQUENCE screen or the PATTERN screen.

Use to select the track on which you want to playback the mute

operations.

Press (Track Param).

The TRACK PARAMETER popup will appear.

Use the Mute Control parameter to specify whether mute operations are to be

played-back or not.

• Mute Control

Tracks will be muted/unmuted according to the track mute data recorded on the

Mute Control Track.

Press (Close).

The TRACK PARAMETER popup will close. If you want to enable/disable mute

Playback mute operations

Value Explanation

Off The recorded mute data will be disabled. Mute operations will not be

played back.

The recorded mute data will be enabled.

On (Default=Off)

The recorded mute data will be enabled. With this setting, mute will

automatically be disabled when you move the time location to the

beginning of the track.

On (Default=On)

The recorded mute data will be enabled. With this setting, mute will

automatically be applied when you move the time location to the

beginning of the track.

Recording will end

automatically if you access any

screen other than the TRACK

MUTE screen (for example by

pressing [EXIT]) while

recording.

MV-8000v35_r_e 6 ページ２００５年１２月５日　月曜日　午後２時４２分

Automating mixing operations (Automation)

operations for other tracks, repeat steps 2–5.

Hold down , and press .

Press .

Use to select “Track Mute Setup” and press (Select).

The TRACK MUTE SETUP popup will appear.

Set the Mute Control Track parameter to On.

10.

Press .

The TRACK MUTE SETUP popup will close.

11.

Move the current time to the location at which the mute operations were

recorded.

12.

Press .

[PLAY] (green) will light. The mute settings of each track will change according to

the mute data recorded on the Mute Control Track.

13.

Press to stop playback.

[PLAY] will go dark, and playback will stop.

The on/off status of the Mute

Control Track parameter can

e set for each Song and each

Pattern.

The on/off status of the Mute

Control Track parameter for a

Song can also be set from the

SONG PARAMETER screen.

The on/off status of the Mute

Control Track parameter for a

Pattern can also be set from the

PATTERN PARAMETER

screen.

MV-8000v35_r_e 7 ページ２００５年１２月５日　月曜日　午後２時４２分

Automating mixing operations (Automation)

In the MUTE CONTROL TRACK screen, you can edit the mute data that is recorded

on the Mute Control Track. You can adjust the timing (measure-beat-tick) of the

recorded mute data, or change the mute on/off status.

Hold down , and press .

The TRACK MUTE screen will appear.

Press .

Use to select “Mute Control Track” and press (Select).

The MUTE CONTROL TRACK screen will appear.

Use or VALUE dial to select the mute data which you want to edit.

Use to select the parameter which you want to change.

Use VALUE dial or / to change the value.

Editing the recorded mute data

F button Explanation.

(Create) Adds a new Mute data to the current location.

(Erase)

Erases the Mute data at the cursor location. The erased data will be

held in the temporary memory.

(Copy)

Copies the Mute data at the cursor location into the temporary

memory.

(Paste)

The PASTE EVENT popup will appear. Adds the Mute data held in

the temporary memory to the specified time.

(Track Sel) The TRACK SELECT screen (p. 9) will appear.

You can access the MUTE

CONTROL TRACK screen

from the SEQUENCE (or

PATTERN) screen. To access

this screen, press [MENU],

select “Mute Control Track”,

then press [F5 (Select)].

To specify the value of a

parameter, you can use the

VALUE dial or [DEC]/[INC],

or use the numeric keys to

input the value directly. After

using the numeric keys to

input a value, press [ENTER]

to finalize the input.

MV-8000v35_r_e 8 ページ２００５年１２月５日　月曜日　午後２時４２分

Automating mixing operations (Automation)

You can limit the mute data shown on the MUTE CONTROL TRACK screen so that

you see only the single track you’re interested in.

Hold down , and press .

The TRACK MUTE screen will appear.

Press .

Use to select “Mute Control Track” and press (Select).

The MUTE CONTROL TRACK screen will appear.

Press (Track Sel).

The TRACK SELECT popup will appear.

Specify the track number you want to view.

• Mode

Press .

The TRACK SELECT popup will close.

Viewing the mute data of only a specific track

Value Explanation

All

The mute data of the all tracks will be shown.

One Track Mute data of the single track you specify will be shown. Use the

parameter below to select the track you want to view.

MV-8000v35_r_e 9 ページ２００５年１２月５日　月曜日　午後２時４２分

Automating mixing operations (Automation)

The operations of the C1–C3 knobs assigned to MFX (multi-effects) parameters can

be recorded on a MIDI track.

Assign the C (Control) knobs to the effect parameters you want to control, as

described in “KNOB ASSIGN popup” in the MV-8000 owner’s manual.

Access the SEQUENCE screen or the PATTERN screen.

Use to select the MIDI track on which you want to record the C knob

operations (movements).

Press (Track Param).

The TRACK PARAMETER popup will appear.

Set the Output Assign parameter to MFX.

Move the current time to the location at which you want to start recording the

C knob operations.

Press .

[REC] (red) indicator will blink, and The RECORDING PARAMETER (MIDI) popup

will appear. Make recording settings as necessary.

Press .

[REC] (red) and [PLAY] (green) will light, and the RECORDING PARAMETER

(MIDI) popup will close. Use the C1–C3 knob to change effect parameters.

Operations of the C1–C3 knobs will be recorded.

Press to stop recording.

[REC] and [PLAY] will go dark, and recording will stop.

Automating operations for each C (Control) knob

Recording C (Control) knob operations

MV-8000v35_r_e 10 ページ２００５年１２月５日　月曜日　午後２時４２分

Andere Handbücher für MV-8000

Inhaltsverzeichnis

Andere Roland Aufnahmegeräte Handbücher

Roland

Roland USB ARPSYNC module Bedienungsanleitung

Roland

Roland PMA-5 Bedienungsanleitung

Roland

Roland A-37 Bedienungsanleitung

Roland

Roland CM-500 Bedienungsanleitung

Roland

Roland J-6 Bedienungsanleitung

Roland

Roland UA-4FX2 Bedienungsanleitung

Roland

Roland Edirol R-44 Bedienungsanleitung

Roland

Roland TR-08 Bedienungsanleitung

Roland

Roland RE-3 Bedienungsanleitung

Roland

Roland BOSS RT-20 Bedienungs- und Wartungshandbuch

Roland

Roland JS-30 Bedienungsanleitung

Roland

Roland AR-3000 Bedienungsanleitung

Roland

Roland Edirol PCR-30 Bedienungsanleitung

Roland

Roland CDR-88RW-4 Bedienungsanleitung

Roland

Roland SDE-2500 Bedienungsanleitung

Roland

Roland MC-50 mkII Bedienungsanleitung

Roland

Roland GK-2A Bedienungsanleitung

Roland

Roland V-Guitar System VG-99 Bedienungsanleitung

Roland

Roland Studio Package Pro Bedienungsanleitung

Roland

Roland MT-32 Bedienungsanleitung

Roland

Roland INTEGRA-7 SuperNATURAL Bedienungs- und Wartungshandbuch

Roland

Roland S-770 Bedienungs- und Wartungshandbuch

Roland

Roland R-5 Bedienungsanleitung

Roland

Roland AR-3000SD Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch