Roland SonicCell SCWS06 Gebrauchsanweisung

Using SonicCell with GarageBand™

®ÂØÒÅˆÎ®Workshop

SonicCell Expandable Synthesizer Module

and Audio Interface

written permission of Roland Corporation U.S.

Apple™ and GarageBand ™ are trademarks of Apple Inc.

Apple Inc. is not associated or aliated with Roland in any manner.

SCWS06

About the Workshop Booklets

Roland’s SonicCell is designed for modern musicians. Using USB, It adds a

huge set of sounds to your digital audio workstation (or “DAW”) without

adding to your computer’s workload. It’s also an audio interface that can get

signals from mics, instruments, or other devices to DAW tracks for recording.

SonicCell’s Editor software allows you to program SonicCell from within your

DAW. Onstage, its compact size also makes SonicCell the ideal companion

for a laptop DAW, letting you perform and sing along with recorded tracks.

Or use it to play back sequences and audio files from a USB memory stick.

Each SonicCell Workshop booklet focuses on one SonicCell topic, and is

intended as a companion to the SonicCell Owner’s Manual. This booklet

requires SonicCell O.S. Version 1.11 or higher. You can download the latest

SonicCell O.S. for free from www.RolandUS.com.

About This Booklet

This booklet contains instructions for using SonicCell with Apple’s

GarageBand. First we’ll discuss how to use SonicCell’s synth sounds with

GarageBand. Next, we’ll talk about SonicCell as as an audio interface, telling

you how to record live audio from SonicCell into GarageBand.

We’ll assume you’ve installed and know how to operate GarageBand—

otherwise, consult GarageBand’s built-in documentation in its Help menu.

We’ll also assume you’ve read the Using SonicCell with a DAW and Using

SonicCell as an Audio Interface Workshop booklets, that SonicCell and your

computer are hooked up and turned on, and that you’re listening through

SonicCell.

Understanding the Symbols in This Booklet

Throughout this booklet, you’ll come across information that deserves

special attention—that’s the reason it’s labeled with one of the following

symbols.

A note is something that adds information about the topic at hand.

A tip offers suggestions for using the feature being discussed.

Warnings contain important information that can help you avoid

possible damage to your equipment, your data, or yourself.

Configuring GarageBand to Work With SonicCell

Setting Up GarageBand for SonicCell Audio

Since GarageBand records only at a sampling rate of 44.1 kHz, set the

SonicCell to 44.1 kHz as described in the Using SonicCell with a DAW

Workshop booklet.

To configure GarageBand so it’s using the SonicCell for its inputs and

outputs:

From the GarageBand menu at the top of the screen, select

Preferences...

At the top of the Preferences window, click Audio/MIDI to open the

Audio/MIDI preferences pane of the Preferences window.

Set both the Audio Output and Audio Input parameters to

3 Roland

SonicCell 44.1 kHz.

After each selection GarageBand asks “Change audio driver?” Click

Yes to proceed both times.

The Audio/MIDI pane should now look like this:

Click the Advanced Tab at the top of the window, and set Audio4

Resolution as desired. If you want to

record a CD—

• select Good so that audio is recorded at 16 bits, as

CDs require.

record at higher quality with later conversion—

• select Better to

record at 24 bits, with conversion to 16 bits when it’s exported.

record the highest-quality audio—

• select Best for 24-bit recording

and export for uses other than burning a CD.

Close the Preferences window.

About GarageBand and MIDI

GarageBand is unusual among DAWs in that its soft synths respond to

incoming MIDI data, but it doesn’t allow you to record MIDI tracks that play

sounds in external MIDI devices such as SonicCell.

As a result, to use SonicCell patches with GarageBand, you have to play the

patches from a MIDI controller connected to SonicCell, and then record

those sounds into GarageBand as audio tracks.

When you’ve connected a MIDI controller to SonicCell, you can use the

controller for playing SonicCell’s sounds or GarageBand’s own sounds.

Each of these operations requires that SonicCell’s System USB-MIDI Thru

parameter be set correctly.

To:

play SonicCell’s synth sounds—• turn off SonicCell’s USB-MIDI Thru

parameter so the incoming MIDI data goes to SonicCell’s tone

generator.

play GarageBand’s soft synths—

• turn on SonicCell’s USB-MIDI Thru

parameter so the incoming MIDI data passes through SonicCell and

into GarageBand for playing its sounds.

Using the SonicCell Editor with GarageBand

The best way to use the SonicCell Editor with GarageBand is to run it as a

separate application. This allows you to select the SonicCell patches you’ll

play from your keyboard, and customize your current SonicCell performance.

Here’s how to do this.

On SonicCell, select the PRST 01 Seq: Template performance.

2 Locate the the Roland folder in your Applications folder, and then

open it to reveal the SonicCell Editor folder.

Open the SonicCell Editor folder, and double-

click the SonicCell Editor application to launch it.

The Editor window opens after exchanging data

with SonicCell.

When you’re done, go back to the SonicCell Editor application and drag

it onto the dock, from where it can be more easily found and launched

in the future.

Using the SonicCell Editor

Part-selection area

Mode-selection buttons

Patch-selection area

You’ll find detailed instructions for using the SonicCell Editor in its manual,

which you can display by clicking the Help button in the SonicCell Editor

window. What follows here are some quick instructions to get you started.

When you’re done setting up a performance, save it so you can recall

it when you return to work on your song, sending it back to SonicCell

to restore its settings for the song.

Selecting a Patch for a Part

You choose each patch you want to use in GarageBand by selecting it for the

part that a GarageBand MIDI track is configured to play. Here’s how:

Click the part’s number in the PARTS area of the Editor window.

Select a patch for the part using the controls in the patch-selection2

area, circled in red above. To select a patch by:

memory location—

• click the PATCH NAME parameter’s popup

arrow to reveal SonicCell’s patches organized by their memory

locations.

category—• click the CATEGORY parameter’s popup arrow to

reveal SonicCell’s patches divided into categories.

You can select performances stored in SonicCell using the PERFORM

NAME popup located above the part-selection area.

Digging Deeper

The SonicCell Editor lets you change the current performance’s sounds in a

range of ways. The mode-selection buttons to the left of the Editor window

determine the parameters you see and can edit at any given time. They’re

divided into the following sections:

SYSTEM—

• The buttons in this area allow you to set SonicCell’s global

behavior, and also get quick access to its input effect, a handy thing

when you’re recording live audio through SonicCell.

PERFORM EFFECTS—

• These buttons edit the performance’s effect setup.

PERFORM—

• These parameters allow you to control the way each part

plays its patch, and lets you add effects to the patch.

PERFORM PATCH—

• These parameters allow you to dig right inside a

part’s patch in order to edit it down to its most basic characteristics.

Before using the PERFORM PATCH buttons, be sure to select the part

that plays the patch you want to edit. You do this by clicking the part’s

number in the part-selection area at the top of the window.

Recording Audio from SonicCell in GarageBand

If you haven’t yet read the Using SonicCell as an Audio Interface

Workshop booklet, read it now before proceeding. SonicCell offers lots

of audio-interface options you’ll want to know about.

Selecting Audio to Record

Create a new real instrument track.1

Select the Basic Track preset in the Track Info panel.2

After recording, you can select other presets for your track. They’ll

add pre-configured effects to the track, and change its icon.

From the Input Source popup, select a SonicCell input. To record3

a mic or instrument connected to SonicCell’s Neutrik input jack—•

select Mono 1 (Roland SonicCell 44.1kHz).

a stereo device connected to SonicCell’s Neutrik and (LINE) R input•

jacks—select Stereo 1/2 (Roland SonicCell 44.1kHz).

a SonicCell synth patch in stereo—• select Stereo 1/2 (Roland

SonicCell 44.1kHz).

Turning Off Software Monitoring

Set the Monitor popup below Input Source to1 Off.

As we noted in the Using the SonicCell with a DAW Workshop booklet,

you can listen through GarageBand if you want to hear its effects as

you record. However, we recommend listening directly through the

SonicCell to avoid latency.

What You Hear Is What You Get

SonicCell can produce synth sounds and pass live audio from its inputs at

the same time. This means a couple of things:

When you want to record a SonicCell patch as audio into Garageband—

•

disconnect any mic or instrument you’ve connected to SonicCell to

keep the resulting synth audio track free of surprise noises.

When you want to record live audio into Garageband—

• be sure not to play

any SonicCell patches while the live audio’s being recorded to keep the

audio signal clean. (You may even want to temporarily disconnect your

MIDI controller to be sure.)

You can, if you like, record multiple live audio sounds at the same time

in GarageBand, thus capturing a more complete performance. Connect

one signal to SonicCell’s Neutrik jack and the other to the (LINE) R

jack. Send the first jack to one GarageBand real instrument track and

the other to a second real instrument track.

Once you’ve got your audio coming from SonicCell the way you want, record

your audio track as you would any other GarageBand real instrument track.

Repeat the steps to the left to record additional real instrument tracks.

Troubleshooting

If you experience problems recording or playing back audio, GarageBand’s

built-in Help provides steps you can take to solve your problem. Search in

Help for “optimize”—the page of steps is called “Optimizing GarageBand

Performance.” In addition to following these steps, raising the Audio Buffer

size in the SonicCell’s control panel may also help, though it may also

increase latency if you’re working with soft synths in GarageBand.

The End

We hope you’ve found this workshop helpful. Keep an eye out for other

SonicCell Workshop booklets available for downloading at www.RolandUS.

com.

Inhaltsverzeichnis

Andere Roland Aufnahmegeräte Handbücher

Roland

Roland RE-501 Bedienungsanleitung

Roland

Roland SN-550 Bedienungsanleitung

Roland

Roland Sonar V-Studio 100 Bedienungsanleitung

Roland

Roland Color CAMM PC-50 Bedienungsanleitung

Roland

Roland DD-3 Bedienungs- und Wartungshandbuch

Roland

Roland Boss GT-6 Bedienungsanleitung

Roland

Roland CD-2e Handbuch

Roland

Roland TurboStart VS-880-S1 Bedienungsanleitung

Roland

Roland CD-2i Bedienungsanleitung

Roland

Roland Audio Canvas UA-100 Bedienungsanleitung

Roland

Roland MT 120 Bedienungsanleitung

Roland

Roland SBX-80 Bedienungsanleitung

Roland

Roland XI-DANTE Bedienungsanleitung

Roland

Roland CD-2i Bedienungsanleitung

Roland

Roland TR-727 Bedienungsanleitung

Roland

Roland MV-8800 Production Studio Bedienungsanleitung

Roland

Roland Mobile UA Bedienungsanleitung

Roland

Roland Director-s SYS-553 Bedienungsanleitung

Roland

Roland Octa-Capture Bedienungsanleitung

Roland

Roland Sonar V-Studio 100 Bedienungsanleitung

Roland

Roland Edirol R-05 Bedienungsanleitung

Roland

Roland HD5-IF Bedienungsanleitung

Roland

Roland R-07 Bedienungsanleitung

Roland

Roland CD-2 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch