Roland V-160HD RCS Bedienungsanleitung

Connection Guide

¹Roland is an either registered trademark or trademark of Roland Corporation in the United States and/or other countries.

¹Company names and product names appearing in this document are registered trademarks or trademarks of their respective owners.

V-160HD RCS is a program for remote control of the V-160HD.

* The program runs on both Windows and Mac.

* This app is compatible with V-160HD system program version 1.08 and later. Make sure

that the system program of the V-160HD is updated to the latest version.

USB Connection

This shows you how to use a USB cable to directly connect your computer to the V-160HD.

1. Connect the computer to the USB STREAM port on the V-160HD.

USB Type-C port

USB Type-C® cable

USB A port

USB cable (USB Type-C to A)

2. Power-on the V-160HD.

Computer

1. Turn on the computer and launch V-160HD RCS.

2. Click the CONNECT [SETUP] button.

3. Select the “USB.”

When the status icon changes to“USB,” the device is connected.

Connecting via LAN Cable

This shows you how to use a LAN cable to directly connect your computer to the V-160HD.

V-160HD

1. Using a LAN cable, connect the LAN CONTROL port on the

V-160HD and the computer.

LAN cable

Communication standards

Port CONTROL port (LAN)

Protocol TCP

Port number 8023

2. Power-on the V-160HD.

3. [MENU] button Ó“LAN CONTROL” Óset “CONFIGURE”

to “MANUAL,” and press the [VALUE] knob.

The IP address, subnet mask, and default gateway are obtained

automatically.

4. Use the [VALUE] knob to select “INFORMATION,” and

press the [VALUE] knob.

The LAN INFORMATION screen appears.

5. Set a network password (four characters).

Input the password that’s set here when accessing the V-160HD

from V-160HD RCS.

Input the password using the [VALUE] knob.

Use the [VALUE] knob to select “SAVE,” and then press the

[VALUE] knob.

Press the [EXIT] button to return to the previous screen.

6. Use the [VALUE] knob to select “INFORMATION,” and

press the [VALUE] knob.

LAN INFORMATION screen appears.

When “CONNECTED” is shown in “STATUS,” the V-160HD connection

settings are nished.

7. Press the [MENU] button to close the menu.

Computer

Making the network settings on the computer

Windows

1. Working in sequence, click the [ (Start)] button 0

“Settings” (gear icon).

2. Click “Network and Internet.”

3. Click “Change Adapter Options.”

4. Right-click the network connection you’re using, then

click “Properties.”

5. Select “Internet Protocol Version 4 (TCP/IPv4)” and click

the [Properties] button.

Connecting via LAN Cable

6. Select “Use the following IP address,” set the values for

the IP address and subnet mask, then click the [OK]

button.

Setting

item Setting

IP address

Set a value that does not conict with the IP address of

any other device connected to the network.

Set this in accordance with the connected network.

Subnet

mask

This sets the subnet mask.

Set this in accordance with the connected network.

Mac

1. Display the Apple menu 0“System Preferences” 0

“Network.”

2. From the list on the left, select the network connection

service you’re using.

3. Set the values for the parameters shown below, then

click the [Apply] button.

Setting item Setting

Congure IPv4 Set to “Manually.”

IP Address

Set a value that does not conict with the IP

address of any other device connected to the

network.

Set this in accordance with the connected network.

Subnet Mask This sets the subnet mask.

Set this in accordance with the connected network.

Settings the V-160HD RCS app

1. Launch the V-160HD RCS app.

2. Click the CONNECT [SETUP] button.

3. Select the “LAN.”

4. Input the “IP ADDRESS” and “NETWORK PASSWORD”

elds, and click the [CONNECT] button.

IP ADDRESS

Input the IP address of the V-160HD.

Check this by pressing the [MENU] button on the V-160HD

and selecting “LAN CONTROL” Ó“IP ADDRESS.”

NETWORK

PASSWORD

Input the network password (four characters) set on

the V-160HD.

When the status icon changes to“LAN,” the device is connected.

Connect the V-160HD and your wireless LAN master device using a LAN cable, so that you can wirelessly connect to the computer via the wireless

LAN master device.

LAN cable

* See the Owner’s Manual of the wireless LAN master device for how to use

that device.

* The wireless LAN (Wi-Fi) connection speed and connectivity may be

unstable in certain network environments.

V-160HD

1. Use a LAN cable to connect the LAN port on your wireless LAN

master device to the LAN CONTROL port on the V-160HD.

* Do not connect to the internet port or WAN port.

2. Turn on the wireless LAN master device and enable DHCP

server functionality on the wireless LAN master device.

3. Power-on the V-160HD.

4. [MENU] button Ó“LAN CONTROL” Óset “CONFIGURE”

to “USING DHCP,” and press the [VALUE] knob.

The IP address, subnet mask, and default gateway are obtained

automatically.

5. Use the [VALUE] knob to select “INFORMATION,” and

press the [VALUE] knob.

The LAN INFORMATION screen appears.

6. Set a network password (four characters).

Input the password that’s set here when accessing the V-160HD

from V-160HD RCS.

Input the password using the [VALUE] knob.

Use the [VALUE] knob to select “SAVE,” and then press the

[VALUE] knob.

Press the [EXIT] button to return to the previous screen.

7. Use the [VALUE] knob to select “INFORMATION,” and

press the [VALUE] knob.

LAN INFORMATION screen appears.

When “CONNECTED” is shown in “STATUS,” the V-160HD connection

settings are nished.

8. Press the [MENU] button to close the menu.

Computer

1. Connect your computer via Wi-Fi (wireless LAN).

For more information on how to make connections, refer to the

respective documentation for the computer and the Wi-Fi router

you’re using.

2. Launch the V-160HD RCS app.

3. Click the CONNECT [SETUP] button.

4. Select the “LAN.”

5. Input the “IP ADDRESS” and “NETWORK PASSWORD”

elds, and click the [CONNECT] button.

IP ADDRESS

Input the IP address of the V-160HD.

Check this by pressing the [MENU] button on the V-160HD

and selecting “LAN CONTROL” Ó“IP ADDRESS.”

NETWORK

PASSWORD

Input the network password (four characters) set on

the V-160HD.

When the status icon changes to“LAN,” the device is connected.

Connecting via Wireless LAN (Wi-Fi)

Connection Using RS-232

This shows you how to use an RS-232 cable to directly connect your computer to the V-160HD.

V-160HD

1. Using an RS-232 cable, connect the RS-232 connector on

the V-160HD to the computer.

Communication standards

Communication

method

Synchronous (asynchronous), full-

duplex

Communication speed 115,200 bps

Parity none

Data length 8 bits

Stop bit 1 bit

Code set ASCII

Flow control XON/XOFF

2. Turn on the power to the V-160HD.

Computer

1. Launch the V-160HD RCS app.

2. Click the CONNECT [SETUP] button.

3. Select the “RS-232.”

4. Select the “PORT,” and click the [CONNECT] button.

PORT From the drop-down list, select the port where the

V-60HD is connected.

When the status icon changes to“RS-232,” the device is connected.

Using a MIDI Controller for Operation

You can connect a MIDI controller to your computer, and use the MIDI controller to control V-160HD RCS. You can use the MIDI controller to

directly control HDMI input and music le volume that otherwise would be controlled via a menu.

Connecting a MIDI controller

1. Using a USB cable, connect your MIDI controller to the computer that is running V-160HD RCS.

LAN connection USB

MIDI controller

USB, RS-232, or

LAN connection

* Some MIDI controllers might require a dedicated USB-MIDI driver.

2. From the V-160HD RCS menu bar, choose “MIDI”0“MIDI Settings.”

The MIDI Control Settings window appears.

3. In the MIDI Settings window, in “INPUT PORT,” choose the MIDI controller that’s connected to the computer, and click the [OK]

button.

This completes the connection between V-160HD RCS and the MIDI controller.

Using a MIDI Controller for Operation

Assigning MIDI controller operations toV-160HD RCS (MIDI mapping)

Here’s how to assign (map) the MIDI controller to the buttons, knobs, and faders that are shown in the AUDIO MIXER screen.

* V-160HD RCS receives the following MIDI messages regardless of the MIDI controller’s channel settings.

AUDIO MIXER screen

When you click the [AUDIO] button, the AUDIO MIXER screen appears.

Buttons, Faders MIDI messages

[SOLO] buttons Control Change: 0–119 (0–63: OFF, 64–127: ON)

Note On (switch on/o each time the message is received)

[MUTE] buttons

Faders Control Change: 0–119 (0–127)

1. Right-click the button, knob, or fader that you want to map, and from the popup menu choose “Learn MIDI Control.”

The message “Waiting for MIDI message” appears.

2. Operate a button or knob of your MIDI controller.

When the corresponding button or knob in V-160HD RCS operates, mapping is complete.

MEMO

¹Viewing the MIDI mapping

You can check the mapped MIDI messages by viewing them in the screen. From the menu bar, choose“MIDI”0“Show MIDI Control

Mapping.”

To hide the MIDI messages, from the menu bar choose “MIDI”

0“Hide MIDI Control Mapping.”

¹Deleting MIDI mapping

To delete an individual MIDI mapping, right-click a mapped button or knob, and from the popup menu choose “Forget MIDI Control.”

To delete all MIDI mappings, from the menu bar choose “MIDI”0“Clear MIDI Control Mapping.”

Using a Game Controller to Control PTZ Camera

You can connect a commercially available game controller to your computer, and use the game controller to control PTZ camera.

CAMERA CONTROL screen

When you click the [CAMERA] button, the CAMERA CONTROL screen appears.

Adjusts the zoom

position.

Adjusts the horizontal

and vertical position.

Selects the camera to be

operated.

* The location of the buttons mapped to ZOOM diers depending on the manufacturer of the controller.

Inhaltsverzeichnis

Andere Roland Aufnahmegeräte Handbücher

Roland

Roland MT-200 Bedienungsanleitung

Roland

Roland Color CAMM PC-50 Bedienungsanleitung

Roland

Roland CD-2e Bedienungsanleitung

Roland

Roland U110 Bedienungsanleitung

Roland

Roland VS8F-3 Gebrauchsanweisung

Roland

Roland EXR-5S Bedienungsanleitung

Roland

Roland RE-100 Bedienungsanleitung

Roland

Roland Camm-1 CX-24/12 Bedienungsanleitung

Roland

Roland Micro Composer MC-80EX Bedienungsanleitung

Roland

Roland RE-100 Bedienungsanleitung

Roland

Roland SDE-1000 Bedienungs- und Wartungshandbuch

Roland

Roland Compu Rhythm CR-68 Bedienungsanleitung

Roland

Roland R-88 Bedienungsanleitung

Roland

Roland S-220 Bedienungsanleitung

Roland

Roland FC-200 Bedienungsanleitung

Roland

Roland MV-8000 Bedienungs- und Wartungshandbuch

Roland

Roland BOSS RT-20 Bedienungs- und Wartungshandbuch

Roland

Roland TD-7 Bedienungsanleitung

Roland

Roland RE-150 Bedienungsanleitung

Roland

Roland CM-32L Bedienungsanleitung

Roland

Roland DC-30 Bedienungsanleitung

Roland

Roland XI-DANTE Bedienungsanleitung

Roland

Roland BOSS SDE-3000EVH Bedienerhandbuch

Roland

Roland Boss GT-10 Bedienungs- und Wartungshandbuch

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch