Roland GAIA Fantom-G2008 Bedienungsanleitung

ACHIEVE

MASTERY!

ENJOY CREATING

SOUNDS

WITH

YOUR SYNTHESIZER

Sound synthesis made easy!

Learn the basics of sound creation on Roland’s

new GAIA SH-01 synthesizer!

Introducing the Controls

INTRO

What are the Three Elements of Sound?

The three elements of sounds are pitch, brightness, and volume. On a synthe-

sizer, these elements are controlled by the following three sections.

1. Pitch = Oscillator (OSC)

2. Brightness = Filter (FILTER)

3. Volume = Ampli er (AMP)

D Beam

By moving your

hand above the D

Beam controller

you can change

the sound’s pitch,

volume, or bright-

ness.

LFO

This modulates the

sound.

Oscillator (OSC)

This determines the sound’s pitch. The oscilla-

tor is the heart of a synthesizer, and is where

you select the waveform that forms the basis

of the sound.

USB Memory

You can save your

patches to USB

memory.

Tone

You can layer three

tones to be played

simultaneously.

Here’s where you

select the tone you

want to edit.

Lever

Move this to left or

right to change the

sound’s pitch.

Move this away

from yourself to

apply modulation.

A NOTE OF

ADVICE

The three elements of sounds are pitch, brightness, and volume. On a synthe-

sizer, these elements are controlled by the following three sections.

ADVICE

Pitch

OSC

Brightness

FILTER

Pitch

OSC

Brightness

FILTER

Roland’s GAIA SH-01 synthesizer is designed so that these three elements of sound are arranged on the

panel in an intuitive layout, making the sound-creating process easy.

EXT IN

You can connect

a portable audio

player here.

Patch

Here you can call up

patches.

Filter

This determines the

sound’s brightness.

Amp

This determines the sound’s

volume. This is also where the

sound’s attack and decay are

adjusted.

E ects

Here you can apply reverb to give

the sound more depth, or add other

e ects.

Volume

This adjusts the

overall volume.

Volume

AMP

Play a Sound!

STEP

The GAIA SH-01 lets you start playing as soon as you turn on the power.

1. Turn on the power.

2. Press the NUMBER [1] button.

In this example we’ve selected sound (patch) number 1. On the following page we’ll explain more about how to

select “patches.”

3. Use the [VOLUME] knob to adjust the volume.

4. Play the keyboard.

Did you hear sound? Now read the next page, and select and play other sounds (patches).

What is a “Patch”?

The GAIA SH-01 lets you save the sounds you create.

Each sound you save is called a “patch.”

You can think of the locations that store the patches as being like shelves.

You’ll select the desired patch by GROUP, BANK, and NUMBER.

PRESET GROUP

Non-rewritable 64 patches

USER GROUP

Rewritable 64 patches

USB MEMORY

Rewritable 64 patches

Internal Memory USB Memory (sold separately)

Internal Memory

USB Memory

Internal Memory

You can use these patches to store the original sounds you’ve created.

Select Other Patches!

A sound you’ve saved can be easily recalled simply by pressing a button.

Go ahead and try out each patch to get an idea of what kind of sounds the GAIA SH-01 can produce.

Select a GROUP

PRESET PATCH

USER PATCH

USB MEMORY PATCH

Select a BANK

Press the [BANK]

and then press one

of the [1]–[8] buttons

Select a NUMBER

Press one of the [1]–[8] buttons

How to Think About Sound Programming

As you take a closer look at the factory-set patches (preset patches),

you’ll notice all sorts of clever tricks that were used to create the sounds.

Remember these tricks, and use them to create new sounds from scratch.

As you create your own sounds by modifying the preset patches, you’ll

learn various ways in which the sound can be changed.

A NOTE OF

ADVICE

Create a Sound!

STEP

Create a Bass Sound

Use the [CUTOFF] Knob to Fatten the Sound!

Moving the [CUTOFF] knob will make the sound fatter or brighter. Once you’ve

familiarized yourself with its function, try moving the [CUTOFF] knob between

10 o’clock and one o’clock while you raise and lower the LFO [FILTER DEPTH]

slider. It’s e ective to do this in sync with the tempo.

1. Call up the “PRESET B-1” patch.

Press the [PRESET

PATCH] button

Press the [1] button

Press the [BANK] button and

then press the [2] (B) button

2. Press the [KEY HOLD] button so it’s blinking.

3. Press the second C key from the bottom.

You’ll hear an arpeggiated techno bass.

4. Turn the FILTER [RESONANCE] knob to the

maximum position.

5. Slowly turn the FILTER [CUTOFF] knob from

the maximum position down to the minimum.

It’s e ective to make this change in sync with the tempo.

6. Set the [RESONANCE] knob at 10 o’clock, and

the [CUTOFF] knob at 12 o’clock.

7. In sync with the tempo, raise the LFO [FILTER DEPTH]

slider, and then bring it back to the center.

For the LFO DEPTH, the center is 0.

A NOTE OF

ADVICE

Use the [CUTOFF] Knob to Fatten the Sound!

Moving the [CUTOFF] knob will make the sound fatter or brighter. Once you’ve

familiarized yourself with its function, try moving the [CUTOFF] knob between

10 o’clock and one o’clock while you raise and lower the LFO [FILTER DEPTH]

slider. It’s e ective to do this in sync with the tempo.

ADVICE

Let’s try playing an arpeggiated synth bass sound.

Turn the  lter knob to make the sound change.

How Do I Stop the Sound?

Press the [KEY HOLD] button to stop the sound.

Add More Low End!

Turn on the [TONE 3] button, and play the keyboard.

Layering three tones produces an even fatter sound.

Save The Patch You’ve Created

The GAIA SH-01 has internal memory in which you can store 64 patches

that you’ve created.

By using USB memory (sold separately), you’ll be able to store 64 more

patches.

To save your patch, press the [WRITE] button and then select the save-destination patch number;  nally press

the [WRITE] button once again.

Select the GROUP

USER PATCH

USB MEMORY PATCH

Select a BANK

Press the [BANK]

and then press one

of the [1]–[8] buttons

Select a NUMBER

Press one of the [1]–[8]

buttons

Press the [WRITE] button

Layer Tones to Create Fat Sounds!

The GAIA SH-01 lets you layer three tones together,

allowing you to create incredibly fat sounds. Use the

TONE buttons to turn each tone on/o .

A NOTE OF

ADVICE

The GAIA SH-01 lets you layer three tones together,

allowing you to create incredibly fat sounds. Use the

TONE buttons to turn each tone on/o .

ADVICE

STEP

Create a Pad Sound

1. Call up the “PRESET A-3” patch.

Press the [PRESET

PATCH] button

Press the [3] button

Press the [BANK] button and

then press the [1] (A) button

2. Press the [KEY HOLD] button so it’s blinking.

3. Simultaneously press the TONE 1 and TONE 2

[SELECT] buttons so they’re lit.

You can use the [SELECT] buttons to select the tone that you want

to edit.

4. Play a chord.

5. While playing a chord, set the AMP [ATTACK]

slider in the range of about 2–5.

The attack sound will become more gentle.

While you play, adjust the slider to get the desired attack.

6. Next, try pressing the TONE 3 [SELECT] button

and adjusting the sound of TONE 3.

7. Raise the FILTER [ENV DEPTH] slider from

the center position to 2. The soft sound will

become brighter.

8. Set the FILTER [ATTACK] slider to 6. Now the

sound of TONE 3 will slowly become brighter

after you play the key.

Here we’ll try playing a polyphonic pad sound. This is a synth pad that combines an

attack sound with a softer sound.

9. Lower the FILTER [ENV DEPTH] slider

downward from the center. The sound of TONE

3 will disappear.

For additional expressive possibilities, you can move the FILTER

[ENV DEPTH] slider while you play.

Turn o the [KEY HOLD] button, and raise

the TONE 3 AMP [R] (RELEASE) slider to the

maximum position.

The time over which the sound of TONE 3 disappears will

lengthen.

You can change how the sound varies over time by adjusting the

ADSR, so you may want to adjust these settings until you get the

sound you like.

Save the Patch You’ve Created

To save your patch, press the [WRITE] button, then select the save-destination patch number, and  nally press

the [WRITE] button once again.

Press the [WRITE] button

Adjust the Envelope!

For example, if you want to create a gradual attack, such as for strings, try

raising the [A] slider. If you want the sound to linger for a while after you take

your hand o the keyboard, raise the [R] slider.

The sound’s attack and decay are created in the ENV (envelope generator) section.

Raise or lower the [A] [D] [S] [R] sliders, and notice how they a ect the sound.

Time

Release the key

Volume

Play a key A D

Symbol Name Volume change

AAttack time Duration of the attack

DDecay time Duration of the decay

SSustain level Level while sustained

RRelease time Duration of the release

A NOTE OF

ADVICE

The sound’s attack and decay are created in the ENV (envelope generator) section.

ADVICE

Create a Wind Sound

STEP

Use Cuto to Control the Character of the Wind

As you turn the [CUTOFF] knob

toward the left, the sound will

become more mu ed. When the

knob is turned all the way toward

the left, the sound will be nearly

inaudible. This is because most of the

frequency range is not being allowed

to pass.

Let’s try playing a wind sound that was created using noise. Noise allows you to produce this type of sound.

We’ll try controlling the character of the wind while listening to it.

1. Turn the FILTER [CUTOFF] knob all the way to

the left.

2. Call up the “PRESET A-8” patch.

Press the [PRESET

PATCH] button

Press the [8] button

Press the [BANK] button and

then press the [1] (A) button

3. Press the [KEY HOLD] button so it’s blinking.

4. Press and hold any key. The wind will start

blowing.

The sound of trickling water will also begin.

5. While holding down the key to make the wind

continue blowing, turn the FILTER [CUTOFF]

knob toward the right, and move it between

the 10 o’clock and 1 o’clock positions.

This lets you control the character of the wind.

Level

Frequency

Overtones

being cut

A NOTE OF

ADVICE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Roland Synthesizer Handbücher

Roland

Roland JUNO-DS Bedienungsanleitung

Roland

Roland SH-201 Bedienungsanleitung

Roland

Roland System-8 Bedienungsanleitung

Roland

Roland SH-32 Handbuch

Roland

Roland System-8 Bedienungsanleitung

Roland

Roland XV-88 Bedienungs- und Wartungshandbuch

Roland

Roland TB-303 Bedienungsanleitung

Roland

Roland Sound Expansion Series Bedienungsanleitung

Roland

Roland JUPITER-X Bedienungsanleitung

Roland

Roland JV80 Bedienungsanleitung

Roland

Roland JUNO-DS88 Bedienungsanleitung

Roland

Roland Sound Expansion Series Bedienungsanleitung

Roland

Roland CG-8 Bedienungsanleitung

Roland

Roland EP-20 Bedienungsanleitung

Roland

Roland SH-01A Bedienungsanleitung

Roland

Roland RS-505 Bedienungs- und Wartungshandbuch

Roland

Roland Fantom-S Bedienungsanleitung

Roland

Roland Boutique JX-03 Installationsanleitung

Roland

Roland JX-305 Bedienungsanleitung

Roland

Roland MKS-50 Bedienungsanleitung

Roland

Roland JUNO-106 Bedienungsanleitung

Roland

Roland FANTOM 6 Bedienungsanleitung

Roland

Roland RS-50 Technisches Handbuch

Roland

Roland JUPITER-X Bedienungsanleitung

Beliebte Synthesizer Handbücher anderer Marken

Joranalogue

Joranalogue Contour 1 Bedienungsanleitung

Full Bucket Music

Full Bucket Music Mono/Fury Bedienungsanleitung

Kawai

Kawai PH50 Bedienungsanleitung

IK Multimedia

IK Multimedia UNO Synth PRO X Bedienungsanleitung

Kawai

Kawai MP7 Technisches Handbuch

Behringer

Behringer DEEPMIND 12 Bedienungsanleitung

Gotharman

Gotharman Gotharman's anAmoNo-box Bedienungsanleitung

Yamaha

Yamaha DX21 Bedienungsanleitung

QuStream

QuStream HDFS-550 Bedienungsanleitung

Modal Electronics

Modal Electronics ARGON8 Bedienungsanleitung

Octave

Octave Cat SRM Bedienungsanleitung

Dreadbox

Dreadbox Murmux Initiate Bedienungsanleitung

neutral labs

neutral labs ELMYRA 2 Bedienungsanleitung

Waldorf

Waldorf KYRA Bedienungsanleitung

Tubbutec

Tubbutec Juno-66 Bedienungsanleitung

EFM

EFM VCADSR - 3510 Bedienungsanleitung

Yamaha

Yamaha MOTIF XF Bedienungsanleitung

Korg

Korg Poly-800 Bedienungsanleitung