Ronda QM2 Bedienungsanleitung

Installation, Use & Care

Guide

Double Drawer / Not insulated Units QM2

IL-MO-045 Rev. 0 05/2010

Double Drawer Unit – QM2

not insulated

Pag. 2 / 12

PROFESSIONAL INSTALLATION REQUIRED

Welcome & congratulations

Congratulations on your purchase of this double drawer.

We at Ronda are very proud of our product and we hope you consider us for fu-

ture purchases.

This product is made in our factory in Italy with components all made in Italy.

For any questions contact us at : info@ronda.it

PLEASE READ CAREFULLY AND SAVE THESE INSTRUCTIONS

Packaging contents:

# 1 SMC Frame

# 2 Drawers

# 3 Stainless Steel Frame

IL-MO-045 Rev. 0 05/2010

Double Drawer Unit – QM2

not insulated

Pag. 3 / 12

PROFESSIONAL INSTALLATION REQUIRED

Notes and Installation Tips

ALWAYS USE PROTECTION GLOVES AND EYE SAFETY GOGGLES:

Use care and always use protection gloves and safety goggles during in-

stallation and care. Because the drawers may have sharp edges, if not

handled with care they can cause cuts and abrasions.

Tools you will need : Power screw driver, manual screw driver, level, tape

measure.

Carefully unpack cabinets making sure not to scratch stainless steel fronts

and not to loose or misplace any components.

DO NOT remove polyethylene protective coating until installation is com-

plete.

Remove all drawers before installation. This will make cabinet easier to lift

and install and give access to installation hardware.

This product is made only for application on a subframe, which can be

made in different materials (wood, plastic, alluminium) into a wall structure

(Fig. 1)

Do not use the drawers as ladder. This would be dangerous for you and can

cause the item to break.

Fig. 1

Subframe

IL-MO-045 Rev. 0 05/2010

Double Drawer Unit – QM2

not insulated

Pag. 4 / 12

PROFESSIONAL INSTALLATION REQUIRED

Before Installation

Verify model number on the box label.

Verify the counter hole measure refering to the following table :

The maximum deviation permitted is : 0.04’’ (1 mm). Otherwise the SMC

frame get deformed and drawers don’t work properly. Use spacers to get

the right counter hole dimensions.

Check with a level that the wall is plumb.

Verify with a level the horizontal and vertical level of the counter hole and

correct if not accurate.

Counter Hole

Model a b

+0,04 + 0,04

inch

16,96

24.44

+1 +1

QM21

mm 431

621

IL-MO-045 Rev. 0 05/2010

Double Drawer Unit – QM2

not insulated

Pag. 5 / 12

PROFESSIONAL INSTALLATION REQUIRED

Assembly and Installation

Carefully unpack cabinet making sure not to scratch stainless steel fronts.

Stainless is protected by a plastic coating that must be removed after

setup.

Remove drawers and store in a safe place.

Use protection gloves

Put the frame inside the

counter hole.

IL-MO-045 Rev. 0 05/2010

Double Drawer Unit – QM2

not insulated

Pag. 6 / 12

PROFESSIONAL INSTALLATION REQUIRED

Be sure that the SMC

frame fits well in the wall.

If not, use spacers to fit.

Secure the SMC frame to

the wall with screws into the

dedicated matching holes.

Use # 10 mushroomhead

screws (not included).

The use of screws with dif-

ferent heads can cause an

interference with the

drawer guides.

IL-MO-045 Rev. 0 05/2010

Double Drawer Unit – QM2

not insulated

Pag. 7 / 12

PROFESSIONAL INSTALLATION REQUIRED

Insert the drawer rear

wheels into the guide

slots.

To do this easier you

must incline the front

down a bit.

Close thedrawer completely

and repeat theoperation for

thesecond drawer.

IL-MO-045 Rev. 0 05/2010

Double Drawer Unit – QM2

not insulated

Pag. 8 / 12

PROFESSIONAL INSTALLATION REQUIRED

Care and cleaning

It is imperative that the owner realizes that he/she is required to perform

reasonable maintenance and care of the drawers in order to maintain the

manufacturers warranty. Failure to perform reasonable maintenance and

care may void the warranty.

The following is a list of maintenance steps and things to avoid. This is

not intended to be a complete list, but is to be used as a guideline for

general care.

Carefully remove protective plastic peel coat from each stainless steel surface.

External Surfaces:

Clean stainless with stainless steel cleaner in direction of grain. Rubbing across

the grain direction may produce minor scratches. Recommended cleaners are

Weiman

, Stainless Steel Magic

and Sheila Shine

In a salty air environment, a slightly more oily cleaner like Sheila Shine

will

protect better against oxidation, pitting or slight surface rust. Cleaning the sur-

faces periodically will protect the finish for many years. In a heavily salty area,

you will have to clean more frequently as salt breaks down into highly corrosive

chlorine that will attack the metal. Surface corrosion will not affect performance

of the product, but will affect the look.

DO NOT USE scratchy pads, scouring pads, or stiff sponges for cleaning. Do

not use abrasive detergents, powdered cleansers or detergents containing acid

substances or bleach.

IL-MO-045 Rev. 0 05/2010

Double Drawer Unit – QM2

not insulated

Pag. 9 / 12

PROFESSIONAL INSTALLATION REQUIRED

Removing and cleaning the magnetic gasket :

•Carefullyinsertascrewdriverintoacornerof

thegasket(1).

•Liftthegasketuntilitexits fromtheseat(2).

•Removethegasket byhand(3).

•Cleanwithwaterandneutraldetergent.

•Insertthegasketinitsseatand strongly

pressitonalltheperimeter.Youcanlubri-

catethegasketseattodothiseasly.

Drawer Guides

Drawer load capacity should not exceed 50 lbs per drawer. Never use an ex-

tended drawer for a ladder or a work platform.

IL-MO-045 Rev. 0 05/2010

Double Drawer Unit – QM2

not insulated

Pag. 10 / 12

PROFESSIONAL INSTALLATION REQUIRED

WARNINGS

•Surfaces can be very hot when exposed to direct sunlight.

•Molds can form if not properly dried.

•Do not use as a ladder.

•Avoid any contact with electrical outlets or wires.

•This is only a food container. It is not a refrigerated space,

and will not prevent food spoilage.

•If exposed to temperatures below – 4 °F and above + 120 °F

deformation and malfunction of the drawers can occur.

•If installed adjacent to the heating elements of a barbeque,

insulation can be less effective.

•If installed near to the sea, damage from salty water can oc-

cur.

•Keep drawers closed when not in use.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ronda LCD-Schublade Handbücher

Ronda

Ronda QM1 Bedienungsanleitung

Beliebte LCD-Schublade Handbücher anderer Marken

Acnodes

Acnodes KD 8228 Bedienungsanleitung

Ameriwood

Ameriwood 9524328PCOM Bedienungsanleitung

Kesseböhmer

Kesseböhmer TANDEM solo Bedienungsanleitung

Crystal Image Technologies

Crystal Image Technologies RMD-151-A Series Bedienungsanleitung

APW Wyott

APW Wyott Ease Extreme HDX-1-120 Bedienungsanleitung

NTI

NTI RACKMUX-V17-N Bedienungsanleitung

Austin Hughes

Austin Hughes CyberView L120 Bedienungsanleitung

Uplift Desk

Uplift Desk STR018 Bedienungsanleitung

Acnodes

Acnodes KDC 81932 Bedienungsanleitung

Acnodes

Acnodes RK1200T Bedienungsanleitung

StarTech.com

StarTech.com DuraView RACKCONS1501 Bedienungsanleitung

Mocka

Mocka Mischa Bedienungsanleitung

GRASS

GRASS DWD XP Bedienungsanleitung

StarTech.com

StarTech.com DuraView RACKCONS1701 Bedienungsanleitung

Fisher & Paykel

Fisher & Paykel IZONA CoolDrawer RB36S Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology LCD1U17-44 Bedienungsanleitung

Fujitsu

Fujitsu RC25 Bedienungsanleitung

Acnodes

Acnodes RK 1000B Bedienungsanleitung