Ronda Startech 5030.D Bedienungsanleitung

Cal. 5030.D

User’s Manual

– Brief specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

– Description of the display and control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

– Setting the time / date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18–21

– Operation of the chronograph . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22–27

In case your watch needs to be repaired or to raise claims

under a guarantee, please contact the point of sales

Description of the display and control buttons

Display elements

Second hand

Minute hand

Hour hand

Centre stop-second

Minute counter

Hour counter

Date

Control buttons

Push button A

Crown

Push button B

Cal. 5030.D

Brief specifications

Time/Date

• Hour hand

• Minute hand

• Small second hand (position 3h)

• Date (position 4h)

Chronograph

• Hour counter up to 12 hours (position 6h)

• Minute counter up to 30 minutes (position 9h)

• Centre stop-second

General

• Battery type: 395 (diameter 9.5mm x 2.6mm / SR 927 SW)

• Accuracy: +20 / -10 seconds per month

III

Setting the date (quick mode)



Pull out the crown to position

(the watch

continues to run).



Turn the crown until the correct

date appears.



Push the crown back into position

Please note:

During the date changing phase between

9 PM and 12 PM; the date must be set to the

date of the following day.





I II III

Setting the time



*Pull out the crown to position

III

(the watch stops).



Turn the crown until you reach the correct

time

8:45



*Push the crown back into position

Please note:

* In order to set the time to the exact second,



must be pulled out when the second hand

is in position «60» (I).

Once the hour and minute hands have been

set,



must be pushed back into position I at

the exact second.

Second hand





I II III



**Pull out the crown to position

III

(the watch stops).



**Turn the crown until the correct date

appears.



**Continue to turn the crown until the

correct time 8:30 PM appears.



**Push the crown back into position

Please note:

**To set your watch to the exact second,

please refer to the chapter entitled «setting

the time».

**Please observe the AM/PM clock rhythm.

Second hand











III

Setting the date/time

following a battery change

Example:

– Date / time on the watch: / 1:25 AM

– Present date / time: / 8:30 PM



Pull out the crown to position

(the watch continues to run).



Turn the crown until yesterday’s date

appears .

Crown

Date





Chronograph: Basic function

(Start / Stop / Reset)

Example:

Start:

Press push-button

Stop:

to stop the timing, press push-

button A once more and read the three

chronograph hands:

20min

10 sec.

Zero positioning:

Press push-button

(The three chronograph hands will be reset

to their zero positions).



Push-button A

Push-button B



Chronograph:

• The chronograph’s hour counter measures times up to 12 hours.

• The minute counter measures 30 minutes per rotation.

• The center stop-second measures 60 seconds per rotation..

Display elements

Centre stop-second

Minute counter

Hour counter

Control buttons

Push-button A

(Start / Stop)

Push-button B

(Reset)

Please note:

Before using the chronograph functions, please ensure that:



the crown is in

position I

(= normal position).



the 3 chronograph hands are precisely at zero position following activation of

push-button B

Should this not be the case, the positions of the hands must be adjusted (see the chapter enti-

tled «adjusting the chronograph hands to zero position»).

Minute counter

Hour counter

Chronograph:

Intermediate or interval timing

Example:

Start:

(start timing)

Display interval:

e.g.

10 minutes 10 seconds

(timing

continues in the background)

Making up the measured time:

(the 3 chronograph hands are quickly

advanced to the ongoing measured time).

Stop:

(Final time is displayed)

Reset:

The 3 chronograph displays are returned

to their zero position

Push-button A

Push-button B







Please note:

* Following



, further intervals or inter-

mediates can be displayed by pressing

push-button B

(display interval / make up

measured time, ...)



Chronograph:

Accumulated timing

Example:

Start:

(start timing)

Stop:

(e.g.

min

sec following



)

Restart:

(timing is resumed)



Stop:

(e.g.

min

sec following



)

=28 min 10 sec

(

The accumulated measured time is shown

)

Reset:

The three chronograph hands are returned

to their zero positions.









Push-button A

Push-button B



Please note:

* Following



, the accumulation of the

timing can be continued by pressing

push-

button A

(Restart / Stop, Restart / Stop, …)

Minute counter

Hour counter

Minute counter

Hour counter

Adjusting the centre stop second

1 x short

long

Single step

Continuous

Adjusting the next hand B



Returning the crown to position

Termination of the chronograph hands adjustment

(can be carried out at any time).

III

1 x short

long

Single step

Continuous

1 x short

long

Single step

Continuous





Adjusting the hour counter hand (position 6h)

Adjusting the minute counter hand (position 9h)



I II III

III

Adjusting the chronograph

hands to zero position

Example:

One or several chronograph hands are not in

their correct zero positions and have to be

adjusted (e.g. following a battery change).



Pull out the crown to position

III

(all 3

chronograph hands are in their correct or

incorrect zero position).



Keep push-buttons

A and B

depressed

simultaneously

for at least 2 seconds

(the centre stop-second rotates by

360°



corrective mode is activated).

Center

stop-second

Push-button A

Push-button B







Minute counter

Hour counter

Andere Handbücher für Startech 5030.D

Inhaltsverzeichnis

Andere Ronda Betrachten Handbücher

Ronda

Ronda 1006 Betriebsanleitung

Ronda

Ronda startech 3500 Bedienungsanleitung

Ronda

Ronda 3540.D Bedienungsanleitung

Ronda

Ronda Cal. 5020.B Bedienungsanleitung

Ronda

Ronda normtech 700 Bedienungsanleitung

Ronda

Ronda Cal. 5020.B Bedienungsanleitung

Ronda

Ronda Xtratech Bedienungsanleitung

Ronda

Ronda 3520.D Bedienungsanleitung

Ronda

Ronda normtech 6203.B Bedienungsanleitung

Ronda

Ronda 706.1 Bedienungsanleitung

Ronda

Ronda Mastertech 8040.N Bedienungsanleitung

Ronda

Ronda mecano Bedienungsanleitung

Ronda

Ronda 505.24D Bedienungsanleitung

Ronda

Ronda Startech 5000 Betriebsanleitung

Ronda

Ronda Cal. 5130.D Bedienungsanleitung

Ronda

Ronda startech 4000 Bedienungsanleitung

Ronda

Ronda Startech Bedienungsanleitung

Ronda

Ronda 3540.D Bedienungsanleitung

Ronda

Ronda startech 4000 Bedienungsanleitung

Ronda

Ronda 5010.B Bedienungsanleitung

Ronda

Ronda powertech 585 Bedienungsanleitung

Ronda

Ronda Z60 Bedienungsanleitung

Ronda

Ronda startech 5040.B Bedienungsanleitung

Ronda

Ronda Mastertech 8000 Betriebsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

Timex

Timex W-214 Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung