Rosco RoscoLED VariWhite Gaffer Kit Bedienungsanleitung

PLEASE READ & SAVE THESE ORIGINAL INSTRUCTIONS

User Guide

RoscoLED® Tape

VariWhite Gaffer Kit

www.rosco.com

Specifications

Part No.: 2932200BICLR – RoscoLED VariWhite Gaffer Kit

External Dimensions: 14” L x 12” W x 5.4” H

(35.6 cm L x 30.5 cm W X 13.7 cm H)

Weight: 8 lb (3.6 kg)

TABLE OF CONTENTS

Introduction......................................................................................................................................... 3

Important Safeguards .................................................................................................................... 3-5

Unpacking ............................................................................................................................................ 6

Connecting RoscoLED Tape............................................................................................................. 7

Troubleshooting ................................................................................................................................10

Specifications ....................................................................................................................................11

Warranty ........................................................................................................................................... 12

Information and specifications in this document are subject to change without notice.

Rosco assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual.

User Guide

INTRODUCTION

Congratulations on your purchase of a RoscoLED Gaffer Kit.

Designed to meet the needs of today’s Chief Lighting Technicians and Cinematographers, the RoscoLED

VariWhite Gaffer Kit provides a quick and versatile solution for the most challenging lighting situations.

Combining durable color-correct and tunable LED strips and tiles with simple plug-and-play connections

offers filmmakers fast, easy set-up that minimizes downtime between takes.

To ensure efficient and safe operation, please take a few moments to read this manual completely.

IMPORTANT SAFEGUARDS

The symbols below are used throughout this manual to identify important safety information. Heed all

warnings and safety info on.

Warning, Danger or Caution

Risk of Personal Injury

Risk of Electric Shock

Risk of severe electric shock

PREVENTING ELECTRIC SHOCK

• This machine uses mains electrical power at 100-240VAC. When directly contacted, such voltages are

hazardous to human life. Follow all local electrical codes and take precautions when using this product.

• This product is designed to operate from three-wire power systems, where one of the wires is a safety

ground. DO NOT disconnect the safety ground, or use extension cords or adapter plugs to connect this

machine to a two-wire system. Operation without a safety ground may result in hazardous electrical shock.

• Use only extension cords that are of appropriate length and are rated for the Power Adapter’s specified

voltage and current. If an extension cord shows signs of wear or gets warm to the touch, discontinue its

use and obtain a cord with a higher current rating. Improper extension cords are hazardous and may result

in poor performance due to excessive voltage drop.

• Disconnect unit from power source before servicing and when not in use.

MAINTAINING SAFE OPERATION

• Use only Rosco spare parts and accessories so as to not void the system warranty.

• RoscoLED DMX Controllers must only be serviced by a qualified technician.

• RoscoLED Gaffer Kits are not intended for residential use. Use only in a professional studio or mobile video

environment.

• RoscoLED Gaffer Kits are IP43 rated – for indoor use only.

• RoscoLED Gaffer Kits are not certified for use in hazardous locations.

• RoscoLED Gaffer Kits are designed for operation within the range of - 22° to 122°F (-30° to +50°C).

• Ensure Gaffer Kits are stored within the range of -40° to 176°F (-40° to +80°C).

UNPACKING

Carefully unlatch the lid of your RoscoLED Gaffer Kit and familiarize yourself with the contents.

Do not attempt to operate your RoscoLED Gaffer Kit if there are any signs of physical damage. In case of

damage, contact your local Rosco dealer.

Your RoscoLED Gaffer Kit will arrive with all components detached from the power supply and controllers.

Refer to the diagrams below before connecting to AC Mains power.

Item Qty Description Rosco Part No.

1 (2) 12” strips of 12V RoscoLED VariWhiteTape (3000K - 5600K) 29322120BI12

2 (2) 24” strips of 12V RoscoLED VariWhite Tape (3000K - 5600K) 29322120BI24

3 (2) 3” x 6” RoscoLED VariWhite Tiles, 12V (3000K - 5600K) 29322120BI36

4 (2) 10-ft extension cables 290637510000

5 (2) 4-Way splitter cable 290637300000

6 (1) 3A Power adapter: 100-240VAC In / 12VDC Out 290635030120

7 (1) AA Battery Holder 290636510812

8 (1) Car Adapter 290636000000

9 (1) 2 Channel DMX Dimmer 293222610003

10 (1) RF PWM Remote Controller 293222630001

11 (1) Durable Sentinel 912 Carrying Case 293220001001

CONNECTING THE ROSCOLED TAPE

Every component in the RoscoLED Gaffer Kit is designed for quick and easy configuration using 2.1mm

diameter barrel connections. Each connector has a Male or Female gender, so there is no possibility of an

incorrect connection.

The RoscoLED Tape in your Gaffer Kit requires 12VDC input. Always use the Rosco supplied Power Adapter

or alternate AA battery or Car Adapter to avoid damage to the system components and voiding the warranty.

RoscoLED VariWhite Tape uses two sets of Warm/Cool LED’s, requiring two channels of control. Your

RoscoLED Gaffer Kit offers two control options, each with outputs for 2 channels:

• 2 Channel CCT/DMX Controller – use in Manual/Stand-Alone mode or DMX mode to adjust

Color Temperature and Output settings.

• 2 Channel RF Remote Controller – wireless control of your RoscoLED Tape using the convenient

handheld Transmitter.

Refer to the User Manuals for operation of these two controllers.

Basic Configuration:

Power Supply Controller

(DMX or RF Remote)

Extension Cables

(Optional)

RoscoLED Tape

(Strips or Tiles)

TROUBLESHOOTING

SYMPTOM

Tape/Tile will not

illuminate in Manual

Stand-Alone mode

Tape/Tile will not

illuminate in DMX mode

POSSIBLE CAUSE

Barrel Connections incomplete

Not plugged into AC Mains

Batteries charge depleted

CCT/DMX Controller set to DMX

mode

CCT/DMX Controller set to CCT

mode

DMX cable connections are not

secure

Incorrect DMX address

No DMX signal

SOLUTION

Check all connections

Check AC Mains connection

Check battery charge or replace

Confirm Controller is set to Manual

mode

Confirm Controller is set to DMX

mode

Check all DMX cable connections

Confirm DMX address

Confirm DMX console is powered

on and outputting signal

Inhaltsverzeichnis

Andere Rosco Beleuchtungsausrüstung Handbücher

Rosco

Rosco DMG DASH Bedienungsanleitung

Rosco

Rosco DMG LUMIERE Maxi Mix Bedienungsanleitung

Rosco

Rosco Image Spot Mini Series Bedienungsanleitung

Rosco

Rosco DMG DASH Bedienungsanleitung

Rosco

Rosco BRAQ CUBE Bedienungsanleitung

Rosco

Rosco DMX IRIS Bedienungsanleitung

Rosco

Rosco myMIX CONNECT Bedienungsanleitung

Rosco

Rosco DMG Dash Bedienungsanleitung

Rosco

Rosco MIRO CUBE 2 Bedienungsanleitung

Rosco

Rosco MIXBOOK Bedienungsanleitung

Rosco

Rosco RevoPro Bedienungsanleitung

Rosco

Rosco DMG LUMIERE Maxi Mix Bedienungsanleitung

Rosco

Rosco GAM SX4 LOOP TRAY Merkblatt

Rosco

Rosco DMG DASH Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung