Rosen ClearVue Overhead Monitor Bedienungsanleitung

Page 2

Table of Contents

Quick Reference Guide 3

Using the System

Getting Started 4

Lowering the Screen 4

Functional Remote Buttons 5

Using the VCR 6

Using the TV Tuner 7

Using theAuxiliary Inputs 8

Changing the Video Settings 8

Listening over the Vehicle Speakers 9

Listening toAuxiliaryAudio Sources 9

Listening with the Headphones 10

Battery Replacement

Replacing the Headphone Batteries 11

Replacing the Remote Batteries 11

Frequently Asked Questions 12

Page 3

Quick Reference Guide

Releasebutton

To lower the screen:

Press the release button as shown.

To watch a videotape:

Turn the ignition switch to the Run

or Acc position.

Press the POWER button on the remote.

Insert a videotape into the VCR. It will begin playing automati-

cally, and the tape’s picture will appear on the screen.

To watch broadcast television:

(requiresthe optionalTV Antenna)

Turn the ignition switch to the Run or Acc position.

Press the POWER button on the remote.

Press and release the MODE button until ”CH___” and the

currentchannel numberare displayed(for example,“CH2”).

Use the PREV TRK and NEXT TRK buttons to change channels.

To listen over the vehicle speakers:

Turn on the vehicle radio and tune it to 89.1 FM.

Press the POWER button on the remote.

Pressand releasethe SPEAKERON/OFF buttononthe remote

until “FM ON” is displayed on the screen.

If no sound is heard, try 88.7 FM.

To use an AUX source:

(such as an optional videogame or camcorder)

Connect the RCA audio and video outputs of the device to the

Line 2 Inputs on the front of the VCR.

Press and release the “MODE” button until “LINE 2” is dis-

played on the screen. The aux source image should now be

visible on the screen.

Page 4

Using the System

Getting Started

The ClearVue system consists of the following components:

nA Video Cassette Recorder/Player

nAnoverheadMonitor

nWirelessHeadphones (2pair)

nARemote Control

nATV Tuner (requiresthe optional TVAntenna for use)

nAn FM Modulator (allows the system’s sound to be

heardover yourvehicle’sspeakers).

nOther parts and cables which are installed out of

sight in your vehicle.

The ClearVue system is intended to be used with your ignition

key switch in the Run or Acc position. Extended viewing of the

system without the engine running should be avoided, as it

could drain the battery.

Lowering the Screen

Press the Release button located here.

The screen will lower itself into the viewing position. To change

the viewing position, insert two fingers into the adjustment

knob’s finger indentations, and rotate as needed.

Adjustment

Knob

Page 5

Using the System

Functional Remote Buttons

SpeakerOn/Off

NOTE: Some buttons

control functions only

onother Rosen

products.

Power

Eject

VCP

Mode

Aux

Mute

Exit

PreviousTrack

Next Track

Play/Pause

Stop

Slow

Rewind

FastForward

VideoMenu

Page 6

Using the System

Using the VCR

In order to watch a video tape, insert the tape into the VCR.

The tape will begin playing and the picture will be visible on

the screen.

While viewing a video tape, these functions are available from

the remote:

To view the tape at a slower speed, use the SLOW button.

To rewind the tape, use the REW button.

To fast-forward the tape, use the FFWD button.

To pause or resume playback, use the PLAY/PAUSE button.

To stop playback, use the STOP button.

To eject the tape, use the EJECT button.

VCP Protection System

The VCR has a protection system which will prevent it from

operating in extreme high temperatures, or if condensation

(dew) is detected within the VCR itself. This helps prevent

damage to video tapes used in such conditions. If extreme

temperatures exist, or if moisture is detected, the VCR will not

load the tape, and the DEW/HEAT indicator will illuminate on

the face of the VCR. If this should occur, wait until the tem-

peraturehas returned to anormal range, and anycondensa-

tion has had time to evaporate, before using the system. Note

that while this mode is active, the TV Tuner function is not

available.

Tape

Door

Line 2

inputs

Fast

Forward

Play

Rewind

IndicatorLightsfor

Power,Recording,

SLP,andHeat/Dew

Modes;IRRemoteeye

Record

Eject Stop

Power

button

Page 7

Using the System

Using the TV Tuner

NOTE: While the TV Tuner is built into the system, the

optional TV Antenna is required for proper TV reception.

To activate theTV Tuner, press and release the MODE button

until“CH___”and thecurrent channelnumber aredisplayed

(for example, “CH 2”).

To change channels, use the PREV TRK and NEXT TRK

buttons on the remote.

Broadcasttelevision receptionvaries with location,terrain,

distance from the broadcast tower, and other obstructions.

Please remember that in a moving vehicle, signal quality may

fluctuate - this is to be expected.

NOTE: The TV button on the remote is not active on the

ClearVue 6.8 system. Pressing this button will have no effect

on system functions - use the MODE button.

NOTE: When the VCR’s protection mode is active, the TV

Tuner function is not available. For more information, see

“Using the VCR” on the previous page.

Page 8

Using the Auxiliary Inputs

The ClearVue system has two auxiliary audio/video inputs.

These allow the connection of external devices such as a

videogameorcamcorder.

These inputs are standard “RCA”connectors. The first set is

on the rear of the VCR, and the second set is on the face of

the VCR. The red jack is for right-channel audio, the white

jack is for left-channel audio, and the yellow jack is for video.

Before attempting to use an auxilary source unit, make sure

that you obtain the proper cable to connect it to the ClearVue

system.

To play an auxilary source connected to the front-panel jacks,

press and release the MODE button until “LINE 2”is displayed

on the screen.

To play an auxilary source connected to the rear-panel jacks,

press and release the MODE button until “LINE 1”is displayed

on the screen.

NOTE: When using a video game in the vehicle, a 12VDC/

110VAC power inverter is required. Ask your Rosen dealer for

details.

Using the System

***MENU***

>COLOR (35)

CONTRAST(35)

BRIGHT (35)

TINT (35)

Changing the Video Settings

The ClearVue system has adjustable

settings for Color, Contrast, Bright-

ness, and Tint. To change these

settings, press the VIDEO MENU

button on the remote. The menu will

be displayed on the screen until you

press VIDEO MENU again.

To select the setting to be changed: Move the cursor up and

down the menu list using the up and down arrow keys on the

remote.

To change value of the setting: Use the left arrow to decrease

the setting and the right arrow to increase the setting. The

range of values is from zero to 63, with 35 as the default.

Page 9

Using the System

Listening Over the Vehicle Speakers

The ClearVue system uses an FM Modulator to allow the

vehicle speakers to play sound from the video source. The FM

Modulatorwill generatea very-low-powerFM signalon either

89. 1FM or 88.7 FM (two settings are available in case you

have a strong FM station in your area using one of these

frequencies).

To play ClearVue sound over the vehicle speakers:

Turn on the ClearVue system.

Turn on the radio and tune it to 89.1 FM.

If no ClearVue audio is heard, press and release the

SPEAKER ON/OFF button on the remote until “FM ON”is

displayed on the screen.

If no ClearVue audio is heard, set your radio to 88.7 FM.

To turn off ClearVue sound over the vehicle speakers:

Press and release the SPEAKER ON/OFF button until “FM

OFF”is displayed on the screen. This is useful when rear-seat

passengersare usingthe headphones.

Listening to Auxiliary Audio-only Sources

You can use auxiliary audio sources (such as portable CD,

MiniDiscTM, or MP3 players) with the ClearVue system.

Connect the source unit to the auxiliary line audio RCA inputs

(such as the red and white LINE 2 inputs on the front of the

VCR) and select the LINE 2 input with the MODE button.

Page 10

Listening with the Headphones

Turn on the headphones using the switch on the side.

Check the LED (shown) to make sure the headphones are on.

Turndown theheadphone volumeusing therotary controlon

the side.

Using the System

Put the headphones on

your head and slowly

adjust the volume to a

comfortablelevel.

WIthout putting the headphones on your head, rotate the

tuning control until faint sound is audible from the head-

phones. Lower the volume with the volume control until the

headphonescannot beheard.

Rotaryvolume

control

Right

earpiece

PowerLED

On/off

switch

Rotary

tuning

control

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rosen Auto-Videosystem Handbücher

Rosen

Rosen A10 Bedienungsanleitung

Rosen

Rosen Rosen inVUE II Bedienungsanleitung

Rosen

Rosen DS-TY0820-H11 Bedienungsanleitung

Rosen

Rosen AV7700 Bedienungsanleitung

Rosen

Rosen CAR SHOW 7 Bedienungsanleitung

Rosen

Rosen DS-TY10A0 Toyota 4-Runner Bedienungsanleitung

Rosen

Rosen A8 Bedienungsanleitung

Rosen

Rosen ClearVue CV6821 Bedienungsanleitung

Rosen

Rosen AV7000 Bedienungsanleitung

Rosen

Rosen AV8900H Bedienungsanleitung

Rosen

Rosen DS-TY0830-H11 Bedienungsanleitung

Rosen

Rosen T10 Bedienungsanleitung

Rosen

Rosen AV7700B Benutzerhandbuch

Rosen

Rosen AV-BW0801-B21 Betriebsanleitung

Rosen

Rosen DS-TY10B0 Bedienungsanleitung

Rosen

Rosen AV7700 Bedienungsanleitung

Rosen

Rosen T8 Referenzhandbuch

Rosen

Rosen AV7500 Bedienungsanleitung

Rosen

Rosen A7 Bedienungsanleitung

Rosen

Rosen DS-UN1010 Universal Series Bedienungsanleitung

Rosen

Rosen Rosen inVUE II Bedienungsanleitung

Rosen

Rosen M10 Bedienungsanleitung

Rosen

Rosen AV7500 Bedienungsanleitung

Rosen

Rosen R6500 Bedienungsanleitung

Beliebte Auto-Videosystem Handbücher anderer Marken

Stinger

Stinger HEIGH10 RB10RAM13B Bedienungsanleitung

Eonon

Eonon E1057 Bedienungsanleitung

Milion

Milion D2223 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-8153 Bedienungsanleitung

Voxx Electronics

Voxx Electronics HR8MA1 Bedienungsanleitung

Axxera

Axxera AV604Bi Bedienungsanleitung

Clarion

Clarion NX706E Bedienungsanleitung

Pyle view

Pyle view PLDN74BTi Bedienungsanleitung

Clarion

Clarion NX602 Bedienungsanleitung

RCA

RCA DRC6296 - Twin 9" Mobile DVD System Benutzerhandbuch

Kia

Kia MTXM100YPPE Bedienungsanleitung

Lanzar

Lanzar SVDVD5 Bedienungsanleitung

Eonon

Eonon E1060 Bedienungsanleitung

Macrom

Macrom M-AN900 Bedienungsanleitung

Hyundai

Hyundai BAPE-L3000N Bedienungsanleitung

r.LiNK

r.LiNK RL2-UCON8-SM Bedienungsanleitung

Blaupunkt

Blaupunkt DVP 01C Bedienungsanleitung

DP Audio Video

DP Audio Video dbd807nav Bedienungsanleitung