Rosewill R908TV Bedienungsanleitung
LCD TV R908TV R918TV
User Manual
1
User Manual
LCD TV R908TV R918TV
Chapter 1 Introduction
This chapter provides basic information about your LCD TV.
Read this chapter to learn about:
• Features
• Warnings and safeguards
• Package contents
• Controls and connections
Features
• Bright, flick-free image
• Automatic detection and conversion of film content for
correct display with minimal motion artifacts
• Accurate color processing
• HDTV signal compatibility
• Multi-Scan support
• Built-in internal amplifier and speakers
• 1280*1024 SVGA support for computer input
Important safeguards
Risk of electric shock – Do not open
To reduce the risk of electric shock, do no remove the back cover. There are no user-serviceable
parts inside.
Removing the back cover voids the warranty.
Have your LCD TV repaired by qualified service personnel only.
2
User Manual
LCD TV R908TV R918TV
Warnings and precautions
• Do not place your hands, face, or objects close to the ventilation openings of you
LCD TV. The top of your LCD TV gets very hot from exhaust air that is released
through the ventilation openings. Burns or personal injuries may occur if you are too
close the LCD TV. Damage may occur if you place any object near the top of your LCD TV.
• Disconnect all cables before moving you LCD TV. Moving you LCD TV with its
cables attached may damage the cables and cause fire or electric shock danger.
• Do not expose you LCD TV to rain or moisture.
• Keep your LCD TV away from excessive dust, high
temperatures, moisture, or direct sunlight.
• Use your LCD TV in a well-ventilated area and do not cover the ventilation openings.
• Do not modify your LCD TV or use an unshielded power cord or video
input source cable, or you may experience excessive interference.
• Disconnect your LCD TV and unplug the power cord when
the TV is not used for a long period of time.
• If the picture displayed is in any way abnormal, turn off your LCD TV, then
disconnect it from the electrical outlet. Make sure that your video input source
cable is connected correctly, then reconnect your LCD TV to the electrical outlet.
• Disconnect your LCD TV from the electrical outlet before cleaning or performing
maintenance. Do not use liquid or aerosol cleaners. Use only a slightly damp cloth for
cleaning.
• Do not place your LCD TV on an unstable cart, stand, or
table. Your LCD TV may fall, causing serious damage.
3
User Manual
LCD TV R908TV R918TV
A. Function Keys Instruction for TV
Up: Scroll up the menu bar, hot key to adjust channel up
Down: Scroll down the menu bar, hot key to adjust channel down
Menu: Activate OSD menu
Right : Increase setting the menu bar, hot key to adjust volume up
Left : Decrease setting the menu bar, hot key to adjust volume down
Source: Change input source
Power: Turn on or off the main board
4
User Manual
LCD TV R908TV R918TV
B. I/O Connection:
5
User Manual
LCD TV R908TV R918TV
C. OSD (On Screen Display)
menu enables user to manipulate the image and settings
OSD Main menu consists of source:
1. COLOUR
2. PICTURE
3. OSD MENU
4. MISCELLANEOUS
5. EXIT
COLOUR
Contrast Press “+” or “-“ to adjust image get distinct or vague
Brightness Press “+” or “-“ to adjust image get dark or bright
Gamma Correct Press “+” or “-“ to set gamma phase
Colour Temp Press “+” or “-“ to set favorite saturation color for 9300 6500 5800 and
user
Colour Adjust Press “MENU” to set favorite color of red, green, and blue
Exit Press “MENU“ to go back MENU
6
User Manual
LCD TV R908TV R918TV
PICTURE
H. Position Press “+” or “-“ to move to left or right side of image
V. Position Press “+” or “-“ to move to up or down side of image
Phase Press “+” or “-“ to adjust remove noise and sharpen the image
Clock Press “+” or “-“ to adjust frequency to fill display
Sharpness Press “+” or “-“ to mark the image become soft
Exit Press “MENU” to go back MENU
FUNCTION
Auto Adjust Press “+” or “-“ and “MENU” to set auto adjust picture
Auto Color Press “+” or “-“ and “MENU” to set white balance function
Exit Press “MENU” to go back MENU
7
User Manual
LCD TV R908TV R918TV
OSD MENU
Language Press “MENU“ to set 8 languages
OSD H. Position Press “+” or “-“ to move to left or right side of OSD
OSD V. Position Press “+” or “-“ to move to up or down side of OSD
OSD Time Press “+” or “-“ to and “MENU” to adjust OSD display time
Translucent Press “+” or “-“ to change OSD background
Exit Press “MENU“ to go back MENU
MISCELLANEOUS
Signal Source Press “MENU“ to set D-SUB, DVI
Mode Select Press “+” or “-“ and “MENU” to change model 640x400 or 720x400
Reset Press “+” or “-“ and “MENU” to recall Default value
Volume Press “+” or “-“ to set Volume
Exit Press “MENU“ to go back MENU
8
User Manual
LCD TV R908TV R918TV
EXIT
Exit Press “MENU“ to go back MENU
VIDEO OSD
Contrast Press “+” “-“ or IR to adjust image get distinct or vague
Brightness Press “+” “-“ or IR to adjust image get dark or bright
Hue Press “+” “-“ or IR to adjust screen deflection red of green
Saturation Press “+” “-“ or IR to set favorite saturation color
Exit Press “MENU“ to go back MENU
9
User Manual
LCD TV R908TV R918TV
TV OSD
TV Signal Press “+” “-“ or IR to select TV signal from CATV or AIR
TV System Press “MENU” into TV system to select NTSC,NTSC-J or PAL system
CH Press “+” “-“ or IR to select channel
Auto Scan Press “+” “-“ or IR to chose Auto search channel
CH Edit Press “MENU” into CH Edit
Exit Press “MENU“ to go back MENU
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
