Rosewill RSV-R26 Bedienungsanleitung

Server RSV-R26

User Manual

Server RSV-R26 User Manual

A list of mounting parts

Slide rails x 2

Latches x 4

M5 x 8L

Screws x 18

M4 x 6L

Screws x 18

“L” Brackets x 4

Installation manual

Washers x 10

Round-capped

Phillips Screws x 10

M4 Screw

cap x 10

Step 1

Take the sliding rail apart by sliding out the center slide.

Outer slide rail

Center slide rail

Loc

ing clip

Attention:

You will see a locking clip at the middle point of the center slide. By pushing down the

locking clip, you will be able to remove the center slide out the sliding rail.

Server RSV-R26 User Manual

Step 2

Install the center slide to both sides of the chassis, then secure the center slides

with M4*6L screws.

The rackmount chassis

To pull it out of the cabinet

Bac

-end

Front-end

Center slide rail x 2

6L Screws

Attention:

1. Put the center slide right next to the chassis. Align the center slide holes to the

chassis＇mounting holes and install all 3 screws for each slide.

2. From all the way out of the cabinet, the rail has front and back sections. Please do

not mix that.

3. Please leave a 10-20mm space gap between the front point of the slide and the

handle of the chassis.

Step 3

Attach the 4 “L＂brackets on to the 2 outer slide rails. Please do not make it tight so

that it will be adjustable according to the size of the cabinet.

Back-end Front-end

To pull it out of the cabinet

M4 x 6 Screws and washers

Attention:

1. Please do not tighten it so that the brackets can slide and adjust to the width of the

cabinet.

2. While adjusting, please align the positions of “L＂brackets on both 2 slide rails.

Server RSV-R26 User Manual

Step 4 (type1)

Install the latches onto the front-side of the pillar of a rackmount cabinet.

Use M5 x 8L screws to

secure the L brackets onto

the latches (4 places).

Please align the screw

holes on the pillar with the

screw holes on the

brackets.

Attention:

1. Adjust the brackets according to the width of the cabinet.

2. Make sure to align the 2 slide rails on the rackmount and secure the brackets on to the

outer slide rails via screws.

3. Make sure that the 2 sliding rails are at the same height. ( The positions of the screw

holes must be identical as well.)

Step 4 (type2)

Install the latches onto the profile of the pillar of a rackmount cabinet.

Use M5

8L screws to secure the brackets

together with the latches to the cabinet

rackmount. The setup is similar to type 1

Server RSV-R26 User Manual

Step 5

Install the chassis with center slides to the cabinet by sliding into the outer slides.

1. Pull the outer slide all the way until it

reaches the limit.

2. Install the chassis with center slides to

the cabinet by sliding into the outer slides.

In order to successfully push in, please pull

up the locking clips.

Server RSV-R26 User Manual

3. Use M5 square locking nuts

that come with the cabinet and

M5 Round-capped Phillips

screws to secure the chassis to

the rackmount cabinet.(4 places)

Thank you for purchasing a quality Rosewill Product.

Please register your product at : www.rosewill.com for complete warranty information and future support for your product.

Inhaltsverzeichnis

Andere Rosewill Server Handbücher

Rosewill

Rosewill RSV-S8 Bedienungsanleitung

Rosewill

Rosewill RSV-S5 Bedienungsanleitung

Rosewill

Rosewill RC-213 Bedienungsanleitung

Rosewill

Rosewill R2-RAID Bedienungsanleitung

Rosewill

Rosewill RSV-Cage Bedienungsanleitung

Rosewill

Rosewill RSV-Z2000 Bedienungsanleitung

Rosewill

Rosewill RSV-Z2600 Bedienungsanleitung

Rosewill

Rosewill RSV-L4000 Bedienungsanleitung

Rosewill

Rosewill RSV-L4500 Bedienungsanleitung

Rosewill

Rosewill RSV-Z4000 Bedienungsanleitung

Rosewill

Rosewill RSV-R4000 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung