4.0 Product Features
Please nd details of the Ross Power Pack below:
• An excellent choice for instant portable power, simply connect your portable device via the USB socket & press the button for instant charging
• Light-weight, compact and robust design
• Long service life, more than 500 charging/discharging
• LED Power indicator to show the charge status
• Includes 6" (15cm) Micro USB to USB charge cable
• The use of advanced intelligent protection chip, overcharge, discharge, short circuit and leakage protection
• Built in LED ash light
5.0 Product Instructions
The product will require charging upon purchase. The cable provided will charge the power bank with power and depending on the connector
type of your device (Cable is Micro USB) you can also use the cable to charge your device.
5.1 Product Details
5.2 Charging the Power Bank
Using the provided cable, connect the Micro USB via the Micro USB input interface, (5) connect the USB end of the cable to an appropriate charging
port (Examples include a USB plug or a USB input interface on a laptop). The orange LED indicator lights will start to ash. Charging should take
approx. 6 hours, however when fully charged the LED indicator lights with all be continuously on. Once fully charged disconnect the cables.
5.3 Charging a device
To charge a device with a Micro USB connector, use the cable provided. Place the USB end into (4) USB 1.0A output Interface, then plug the Micro
USB into your device. Press the power indicator light. The charge icon on your device should now indicate your device is charging.
To charge a device with another connector type other than Micro USB (iPhone for example), use the cable provided with the device as long as it
has a USB. Place the USB end of the cable into (4) USB 1.0A output interface, then place the connector on the other end into your device. Press
the power indicator light. The charge icon on your device should now indicate your device is charging.
Your device will charge in various speeds depending on the voltage of the device, for larger devices which require larger outputs the Power
Pack 5200 will oer an extension to the life of the battery charge may not fully re-charge the device.
To start charging the device click the on/o button once, for the torch click the on/o button twice.
5.4 LED Indicators
The LED lights are a direct indication of how much charge is in the device. You can check this at any time by pressing the power indicator button.
4 LED Lights: 75- 100% Power Capacity
3 LED Lights: 50-75% Power Capacity
2 LED Lights: 25-50% Power Capacity
1 LED light: 0-25% Power Capacity
6.0 Additional Notes & Tips
• The product can become warm when in use this is normal.
• For rst time charge the product may need 8-10 hours to become fully charged.
• The product will lose charge if left for a long period of time without use.
• Please ensure you keep the USB ports on the device clean, if they require cleaning use a dry cloth.
• To operate the torch press the power button twice
