IMPORTANT SAFETY INSTRUCTIONS
WARNING To guard against injury, basic safety precautions should be observed, including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
DANGER To avoid possible electric shock, special care should be taken since water is employed in the use of
aquarium equipment. For each of the following situations, do not attempt repairs by yourself: return the appliance
to an authorized service facility for service or discard the appliance.
a) If the appliance shows any sign of abnormal operation, immediately unplug it from the power source.
b) If the appliance falls into the water, DON'T reach for it. First unplug it and then retrieve it. If electrical
components of the appliance get wet, unplug the appliance immediately.
c) Carefully examine the appliance after installation. It should not be plugged in if there is
water on parts not intended to be wet.
d) Do not operate any appliance if it has a damaged cord or plug, or if it is
malfunctioning or if it is dropped or damaged in any manner.
e) To avoid the possibility of the appliance plug or receptacle getting wet, position
aquarium stand and tank to one side of a wall mounted receptacle to prevent water
from dripping onto the receptacle or plug. A "drip loop" (see illustration) should be
arranged by the user for each cord connecting an aquarium appliance to a receptacle.
The "drip loop" is the part of the cord below the level of the mains supply socket or the
connector (if an extension cord is used), to prevent water traveling along the cord and
coming in contact with the receptacle. If the plug or receptacle does get wet, DON'T
unplug the cord. Disconnect the fuse or circuit breaker that supplies power to the
appliance. Then unplug and examine for presence of water in the receptacle.
f) Close supervision is necessary when any appliance is used by or near children.
g) To avoid injury, do not contact moving parts or hot parts such as heaters, reflectors, lamp bulbs, etc.
h) Always unplug an appliance from an outlet when not in use, before putting on or taking off parts, and before
cleaning. Never yank cord to pull plug from outlet. Grasp the plug and pull to disconnect.
i) Do not use an appliance for other than intended use. The use of attachments not recommended or sold by the
appliance manufacturer may cause an unsafe condition.
j) Do not install or store the appliance where it will be exposed to the weather or to temperatures below freezing.
k) Make sure an appliance mounted on a tank is securely installed before operating it.
l) Read and observe all the important notices on the appliance.
m) If an extension cord is necessary, a cord with a proper rating should be used. A cord rated for less amperes or
watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be
tripped over or pulled.
n) As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fully fit in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug
can be fully inserted. Do not attempt to defeat this safety feature.
SAVE THESE INSTRUCTIONS
EN
