Rowley R-Tec Automation RTMLDSS50 Bedienungsanleitung
© 2021 Rowley®Company. All rights reserved. R-TEC Automation®is a registered trademark of the Rowley®Company, LLC. 1
Slim Drapery Motor - The Slim Drapery Motor is designed to install
seamlessly behind the drapery panel with quiet start / stop operation,
the ability to easily charge without having to remove the motor and up to
500 open and close cycles per charge, providing the ultimate integrated
functionality without compromising the look of your window treatment.
The Slim Drapery Motor is compatible with our R-TEC Automation®Track
System and AriA®R-TEC Automation® 1 3/8" H-Rail Traverse Systems for
easy incorporation of draperies into the ARC™ motorized platform. The
Manual Override feature enables manual operation when needed. It offers
the option to power the motor with a Li-ion Battery with optional Solar Panel
recharging or continuous 110v AC Power Transformer with 10' or 30' Cord.
Slim Drapery Motor
RTMLDSS50
FEATURES
2-Way RF
Communication
Favorite
Position
Preferred
Open / Close
Limit Settings
Manual
Override
Obstruction
Detection
Quiet
Operation
Adjustable
Speed
© 2021 Rowley®Company. All rights reserved. R-TEC Automation®is a registered trademark of the Rowley®Company, LLC. 2
TABLE OF CONTENTS
Technical Data / Pack Contents 4 - 5
Track & Belt Deductions
Installation 5
Safety 6
Wiring 7
Charging Options
AC Power Transformers
Assembly 8 - 11
General Schematics
Disassemble Existing Drapery Track Prior To Following Assembly Steps
Attaching & Removing the Motor
Attaching & Removing the Li-ion Battery or 110v AC Power Transformer
Functional Overview 12
P1 Button / Motor State Test
Programming / Initial Set Up 13 - 14
Pair Motor with Controller
Check / Change Motor Direction
Auto Set Limits
Adjusting Limits 15 - 16
Adjust Open Limit
Adjust Close Limit
Delete Limits
Controllers & Channels 16 - 17
Using Motor P1 Button
Using an Existing Controller to Add a New Controller or Channel
Using an Existing Controller to Delete a Controller or Channel
Favorite Positioning 18
Set a Favorite Position
Send Drapery to Favorite Position
Delete a Favorite Position
Adjust Motor Speed 19
Increase Motor Speed
Decrease Motor Speed
© 2021 Rowley®Company. All rights reserved. R-TEC Automation®is a registered trademark of the Rowley®Company, LLC. 3
TABLE OF CONTENTS CONT.
Manual Override Function 20
Operating with Manual Override Function
Turn Manual Override Function On / Off
Battery Check Function 21
Send Drapery to Battery Charge Level
RS485 Communication 21 - 22
Enable RS485 Communication
Disable RS485 Communication
RS485 Failure
Sleep Mode 23
Enter Sleep Mode
Exit Sleep Mode
External Low Voltage Switch Mode 24 - 25
Two Button Spring Return Switch (Default Mode)
Three Button Spring Return Switch
Single Button Spring Return Switch
Troubleshooting 26
© 2021 Rowley®Company. All rights reserved. R-TEC Automation®is a registered trademark of the Rowley®Company, LLC. 4
COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.
TECHNICAL DATA / PACK CONTENTS
PRODUCT SPECIFICATIONS
Parameters Slim Drapery Motor
RTMLDSS50
Li-ion Battery
RTMLDSSB
110v AC Power
Transformer 10' (plug
RTMP included)
RTMLDSSPT
110v AC Power
Transformer 30' (plug
RTMP not included)
RTMLDSSPTCS
Max. Run Time 12 min. -
Torque 1.2 Nm -
Speed 120 RPM *
(Adj. to 80 or 100) -
Radio Frequency 433.92 MHz -
Sound Level ~44 DB -
Limit Switch Type Electronic -
Voltage Output - 14.4 V DC 18 V DC
Voltage Input 15 V DC - 110 V AC 60 Hz
Current 1.3 A - 2.0 A
Consumption 20 W 37.44 W 36 W
Battery Size / Type - 2600 mAh -
Charge Time - 8 hours ** (at 2 A) -
Charge Voltage - 5 V DC (Micro USB) -
Solar Panel Compatible - 5 V USB Compatible -
Power Cable Length - - 10' (3 m) 30' (9.1 m)
Weight 1.83 lbs. (0.83 Kg) 0.60 lbs. (0.27 Kg) 0.71 lbs. (0.32 Kg) 1.41 lbs. (0.64 Kg)
RF Protocol ARC™ -
RF Modulation FSK -
RF Signal Range 49 ft. (15 m) -
Temperature Working Range 32º F - 140º F (0º C - 60º C)
Limit Range ∞ -
Insulation Class Class A
Life Cycle Testing 10,000 Cycles | 50 Kg | Up to 11 m Track
Protection Class IP40 ***
*120 RPM is the default speed in operation | 80 RPM is the default speed during limit setting.
**Charge time is based on typical 5V / 2A charge rate of fully discharged battery, actual time may vary between batteries.
***Motor/Battery protection activates when battery voltage reaches 13.5 V DC (motor stops when battery is flat).
© 2021 Rowley®Company. All rights reserved. R-TEC Automation®is a registered trademark of the Rowley®Company, LLC. 5
TRACK & BELT DEDUCTIONS
PACK CONTENTS
Description
RTMLDSS50 Slim Drapery Motor
RTMLDSSB Li-ion Battery*
RTMLDSSPT 110v AC Power Transformer 10' (plug RTMP included)
RTMLDSSPTCS 110v AC Power Transformer 30' (plug RTMP not included)
1. Slim Drapery Motor (power options sold separately)
2. Instruction Manual
*Li-ion Battery requires Wall Battery Charger RTMLDSSBC & USB Charger Cable RTMLDSSUSB or Solar Panel Battery Charger RTMSOLAR2.
INSTALLATION
Installation Instructions: R-TEC Track System H-Rail Traverse System
Slim Drapery Motor with Li-ion Battery
12 7/8" 4 7/16"
17 5/16"
1 3/
4"
Slim Drapery Motor with 110v AC Power Transformer
12 7/8" 5 5/16" 10' or 30'
18 5/16"
1 3/
4"
NOTE: Above figures are for straight tracks only.
System Drive Pulley Return Pulley Track Length Belt Length
R-TEC Track
One Way Draw RTMDSS50DP RTMDSS50RP System Overall Length - 3 5/8"
Ex: 72" - 3 5/8" = 68 3/8" Track Length
(Track Length x 2) + 7 3/8"
Ex: (68 3/8" x 2) + 7 3/8" = 144 1/8"
R-TEC Track
Center Draw RTMDSS50DP (x 2) System Overall Length - 4 5/8"
Ex: 72" - 4 5/8" = 67 3/8" Track Length
(Track Length x 2) + 9 ½"
Ex: (67 3/8" x 2) + 9 ½" = 144 ¼"
AriA®1 3/8"
H-Rail Traverse
One Way Draw
RTFMH138PK/ System Overall Length - 7 ½"
Ex: 72" - 7 ½" = 64 ½" Track Length
(Track Length x 2) + 10"
Ex: (64 ½" x 2) + 10" = 139"
AriA®1 3/8"
H-Rail Traverse
Center Draw
RTFMH138PK/ System Overall Length - 7 ½"
Ex: 72" - 7 ½" = 64 ½" Track Length
(Track Length x 2) + 10"
Ex: (64 ½" x 2) + 10" = 139"
© 2021 Rowley®Company. All rights reserved. R-TEC Automation®is a registered trademark of the Rowley®Company, LLC. 6
SAFETY
Incorrect installation can lead to serious injury and will void manufacturer's liability and warranty.
WARNING
Do no dispose of in general waste.
Please recycle batteries and damaged electrical
products appropriately.
CAUTION
• Do not expose to moisture or extreme temperatures.
• Do not allow children to play with this device.
• Use or modification outside the scope of this instruction manual will void warranty.
• Installation and programming to be performed by a suitably qualified installer.
• For use within drapery treatments.
• Use only R-TEC Automation®hardware.
• Before installation, remove any unnecessary cords and disable any equipment not needed for powered operation.
• Ensure torque and operating time is compatible with end application.
• Do not expose the motor to water or install in humid or damp environments.
• Motor is to be installed in vertical application only.
• Do not drill into motor body.
• The routing of cable through walls shall be protected by isolating bushes or grommets.
• Ensure power cable and antenna are clear and protected from moving parts.
• If cable or power connector is damaged, do not use.
• Ensure all mechanical connections are secure.
IMPORTANT SAFETY INSTRUCTIONS TO BE READ PRIOR
TO OPERATION
• It is important for the safety of persons to follow the enclosed instructions. Save these instructions for future reference.
• Persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge
should not be allowed to use this product.
• Keep remote controls away from children.
• Frequently inspect for improper operation. Do not use if repair or adjustment is necessary.
• Keep motor away from acid and alkali.
• Keep clear when in operation.
© 2021 Rowley®Company. All rights reserved. R-TEC Automation®is a registered trademark of the Rowley®Company, LLC. 7
Battery Charge
LED Indicator
CHARGING OPTIONS
AC POWER TRANSFORMERS
WIRING
Before first use, charge battery fully until LED indicator turns Green (Solid).
IMPORTANT
Charge Li-ion Battery RTMLDSSB using 5V Micro USB.
Solid Red = Charging
Solid Green = Fully Charged
Use optional Solar Panel Battery Charger RTMSOLAR2 for continuous recharging!
Disconnect the main power supply.
Connect the motor according to the information in the table below.
Ensure cable is kept clear of fabric.
IMPORTANT
Item # Power Neutral Live Earth Power Cord Length
RTMLDSSPT
120 V AC / 60 Hz White Black N/A 10' (3 m)
RTMLDSSPTCS 30' (9.1 m)
RTMP Green N/A
Plug
RTMP
AC Power Transformer 30'
(plug RTMP not included)
RTMLDSSPTCS
AC Power Transformer 10'
(plug RTMP included)
RTMLDSSPT
Power OFF
© 2021 Rowley®Company. All rights reserved. R-TEC Automation®is a registered trademark of the Rowley®Company, LLC. 8
ASSEMBLY
GENERAL SCHEMATICS
R-TEC Automation®Track
slim drapery
motor* (can be
top mounted)
carrier
master carrier
body & arms
end
stop
drive belt
(inside track)
return pulley
system requirements:
1 drive pulley & 1 return
pulley for one-way draw;
2 drive pulleys for
center draw.
track
drive pulley bracket
end
hook
Additional Options:
• R-TEC Smart Controls
drive belt clip
Li-ion battery power option
(requires wall battery charger
RTMLDSSBC & USB charger cable
RTMLDSSUSB or Solar Panel
Battery Charger RTMSOLAR2)
110v AC power transformer
power option 10'
(plug RTMP included)
110v AC power transformer
power option 30'
(plug RTMP not included)
*Tandem alternative option.
5 channel handheld remote
with wall mount included
1
ALL
2
3
4
5
© 2021 Rowley®Company. All rights reserved. R-TEC Automation®is a registered trademark of the Rowley®Company, LLC. 9
AriA®1 3/8" Automated H-Rail Traverse
Li-ion battery power option
(requires wall battery charger
RTMLDSSBC & USB charger
cable RTMLDSSUSB or
Solar Panel Battery Charger
RTMSOLAR2)
110v AC power transformer
power option 10'
(plug RTMP included)
110v AC power transformer
power option 30'
(plug RTMP not included)
slim drapery
motor (cannot be
top mounted)
carrier
master carrier
body & arms
pendant
H-Rail
track
drive
pulley bracket
end
cap
return
pulley
drive belt
(inside track)
drive belt
clip
end cap
Additional Options:
• R-TEC Smart Controls 5 channel handheld remote
with wall mount included
1
ALL
2
3
4
5
© 2021 Rowley®Company. All rights reserved. R-TEC Automation®is a registered trademark of the Rowley®Company, LLC. 10
ATTACHING & REMOVING THE MOTOR
Attaching the Motor to the Drive Pulley
Slide the lock button fully left against the spring
pressure force.
Push to lock button fully to the right to ensure the two
are securely attached.
Align and engage the Motor with the Drive Pulley.
Check that the Motor and Drive Pulley are securely
attached by trying to pull them apart.
Removing the Motor from the Drive Pulley
Slide the lock button fully left against the spring
pressure force.
Pull the Motor away from the Drive Pulley.
Inhaltsverzeichnis
Andere Rowley Motor Handbücher
