RTA 515RTAENI Technisches Datenblatt

Real Time Automation, Inc.

1-800-249-1612

515RTAENI-N34

Protocol Gateway

Product User Guide

Firmware Version 4.25

Real Time Automation, Inc.

1-800-249-1612

Trademarks

CompactLogix, ControlLogix, PLC-5, MicroLogix, RSLogix 500, SLC, and PanelView are registered trademarks of Rockwell

Automation, Inc. EtherNet/IP is a trademark of the ODVA. Microsoft, Windows, and Internet Explorer are registered trademarks

of Microsoft Corporation. Kepware is a registered trademark of Kepware Technologies, a software development business of PTC

Inc. All other trademarks and registered trademarks are the property of their holders.

Limited Warranty

Real Time Automation, Inc. warrants that this product is free from defects and functions properly.

EXCEPT AS SPECIFICALLY SET FORTH ABOVE, REAL TIME AUTOMATION, INC. DISCLAIMS ALL OTHER WARRANTIES, BOTH

EXPRESSED AND IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR AN

APPLICATION. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY

FROM STATE TO STATE.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any application, Real Time Automation, Inc. cannot assume responsibility or liability for actual use

based on the examples and diagrams. Except as specifically set forth above, Real Time Automation and its distributors and

dealers will in no event be liable for any damages whatsoever, either direct or indirect, including but not limited to loss of

business profits, income, or use of data. Some states do not allow exclusion or limitation of incidental or consequential

damages; therefore, the limitations set forth in this agreement may not apply to you.

No patent liability is assumed by Real Time Automation with respect to use of information, circuits, equipment, or software

described in this manual.

Government End-Users

If this software is acquired by or on behalf of a unit or agency of the United States Government, this provision applies: The

software (a) was developed at private expense, is existing computer software, and was not developed with government funds;

(b) is a trade secret of Real Time Automation, Inc. for all purposes of the Freedom of Information Act; (c) is “restricted

computer software” submitted with restricted rights in accordance with subparagraphs (a) through (d) of the Commercial

“Computer Software-Restricted Rights” clause at 52.227-19 and its successors; (d) in all respects is proprietary data belonging

solely to Real Time Automation, Inc.; (e) is unpublished and all rights are reserved under copyright laws of the United States.

For units of the Department of Defense (DoD), this software is licensed only with “Restricted Rights”: as that term is defined in

the DoD Supplement of the Federal Acquisition Regulation 52.227-7013 (c) (1) (ii), rights in Technical Data and Computer

Software and its successors, and: Use, duplication, or disclosures is subject to restrictions as set forth in subdivision (c) (1) (ii) of

the Rights in Technical Data and Computer Software clause at 52.227-7013. If this software was acquired under GSA schedule,

the U.S. Government has agreed to refrain from changing or removing any insignia or lettering from the Software or

documentation that is provided or from producing copies of the manual or media. Real Time Automation, Inc.

 
 
Real Time Automation, Inc. 
3 
1-800-249-1612 
 
Contents 
Revision History ............................................................................................................................................5 
Overview.......................................................................................................................................................6 
Hardware –N34............................................................................................................................................7 
Physical Specifications 7 
Mounting with a DIN Rail..............................................................................................................................8 
Installing 8 
Removing 8 
Powering the Gateway..................................................................................................................................9 
Pinouts & Wiring.........................................................................................................................................11 
Pinouts 11 
Wiring 11 
Accessing the Main Page.............................................................................................................................12 
Error: Main Page Does Not Launch 13 
Web Configuration Tabs .............................................................................................................................14 
Committing Changes to the Gateway.........................................................................................................15 
Network Tab................................................................................................................................................16 
Ethernet Settings 16 
Changing from DHCP to Static IP 17 
Additional Fields under Ethernet Settings ..........................................................................................17 
Serial Settings 18 
Email Settings 19 
Email Alarms and Messages 20 
Email Message Example 21 
Data View Tab.............................................................................................................................................22 
Mapping Tab ...............................................................................................................................................23 
Utility Tab....................................................................................................................................................25 
Export/Import Configuration 25 
Import Configuration 25 
Export Configuration 25 
Restart Gateway 26 
Upgrade Firmware 26 
EDS File 26 

Real Time Automation, Inc.

1-800-249-1612

Other References 26

Reference Links 26

NET ENI Event Log Values 27

Security Configuration 28

Home Tab (Diagnostics)..............................................................................................................................30

DF1 Status 30

DF1 Counters 30

Ethernet Status 31

Ethernet Status: Counters 31

Logging 32

Msg Log Tab 32

Serial Diagnostic Tab 33

Ethernet Diagnostics Tab 34

LED Behavior...............................................................................................................................................35

DF1 Node Descriptions Reference Table ....................................................................................................36

Use of Existing 1761-NET-ENI/W Tools.......................................................................................................41

Easily replace an existing NETENI device 41

Using RSLinx................................................................................................................................................42

Ethernet Driver 42

Troubleshooting RSLinx and RSLogix Comms .............................................................................................43

Application Specific Tips .............................................................................................................................44

PanelView Plus Comms 44

Kepware Communications 47

Real Time Automation, Inc.

1-800-249-1612

Revision History

Version

Date

Notes

4.02

7/26/2017

Bug Fixes

1. Updated web UI diagnostics and counters.

2. Added support for RSLinx straight Ethernet driver.

3. Optimized message queue servicing.

4. Added ability to download EDS file from webpage.

5. Removed BOOTP support.

6. Improved IP configuration implementation.

7. Enabled force of at least 1 Admin when security is enabled.

8. Minor webpage layout fixes.

4.16

7/3/2018

Bug Fixes

1. Minor Web Updates

2. EDS File Updated

3. Node 244 and 245 removed

Node 248 functional

4.18

12/14/2018

Features Added

4. 1. Updated RTA Images

4.21

9/28/2020

Features Added

1. Added functionality to work with Ingear PC based

application.

2. EDS file Updated

3. Added additional diagnostic logging

4. Improved functionality/performance

4.25

4/14/2021

Features Added

1. Improved functionality/performance with 6 connections

using UCMM explicit and connected explicit messaging

Real Time Automation, Inc.

1-800-249-1612

Overview

The 515RTAENI is a replacement for the Allen-Bradley 1761-NET-ENI and 1761-NET-ENIW modules. The

515RTAENI gateway:

•Provides the same Ethernet connectivity for all DF1 serial controllers, PanelView Standard

Terminals, and other DF1 full-duplex devices

•Communicates between Allen-Bradley Logix and legacy controllers

•Generates email messages via Simple Mail Transport Protocol (SMTP)

•Allows ability to easily upload and download programs using standard Rockwell Automation

tools

•Writes to Ethernet controllers like ControlLogix

However, the interface is improved by providing web browser configuration, allowing up to 6 Ethernet

connections, adding support for string data types, and improving diagnostic functionality.

If at any time you need further assistance do not hesitate to call Real Time Automation support.

Support Hours are Monday-Friday 8am-5pm CST

Toll free: 1-800-249-1612

Email: support@rtautomation.com

Real Time Automation, Inc.

1-800-249-1612

Hardware –N34

Physical Specifications

POWER

Operating range of 8-28VDC, 125mA at 24VDC

Power can be received over serial cable

TEMPERATURE

Industrial Temperature Range -40°C to +85°C

CERTIFICATIONS

UL, C/UL, CE, FCC, CLASS 1 DIV 2

MOUNTING

Din Rail, Panel

SIZE

4.2” x 3.25” x 1”

WEIGHT

5 oz.

COMMUNICATION PORTS

SERIAL

1 RS232

ETHERNET

1 10/100 Mbps BaseT Ethernet Port

Real Time Automation, Inc.

1-800-249-1612

Mounting with a DIN Rail

Installing

Follow these steps to install your unit.

1) Mount your DIN Rail.

2) Hook the bottom mounting flange under the DIN Rail.

3) While pressing the 515RTAENI against the rail, press up to engage the spring-loaded lower

clip and rotate the unit parallel to the DIN Rail.

4) Release upward pressure.

Removing

Follow these steps to remove your unit.

1. Press up on the unit to engage the spring-loaded lower clip.

2. Swing top of the unit away from the DIN rail

Spring Loaded Lower Clip

DIN Rail

Real Time Automation, Inc.

1-800-249-1612

Powering the Gateway

The following steps will allow you to properly and safely power the gateway.

1. Connect a 24VDC power source to the gateway.

a. The unit draws 125 mA at 24VDC

b. The gateway has a voltage operating range from 8-28VDC; 24VDC is recommended.

Hazardous Environment Power & Installation Instructions

This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D, or non-

hazardous locations only.

WARNING –EXPLOSION HAZARD - Do not disconnect equipment unless power has been removed or

the area is known to be non-hazardous.

WARNING –EXPLOSION HAZARD - Substitution of components may impair suitability for Class I,

Division 2.

THIS EQUIPMENT IS AN OPEN-TYPE DEVICE AND IS MEANT TO BE INSTALLED IN AN ENCLOSURE

SUITABLE FOR THE ENVIRONMENT SUCH THAT THE EQUIPMENT IS ONLY ACCESSIBLE WITH THE

USE OF A TOOL.

WARNING –POWER JACK (Barrel Connector, J1) IS FOR MAINTENANCE USE ONLY AND MAY ONLY BE

USED WHILE THE AREA IS KNOWN TO BE FREE OF IGNITIBLE CONCENTRATIONS OF FLAMMABLE GASES

OR VAPORS. IT IS NOT TO BE CONNECTED UNDER NORMAL OPERATION.

In a Hazardous Environment, the unit must be powered with between 12-24 VDC; 860 mA (6 W) max.

Supervised. The unit is certified to be operated at -40C to 50°C.

Warning improper wiring will cause unit failure

Use the Barrel Connector OR the Screw

Terminals power connection, NOT both

Real Time Automation, Inc.

1-800-249-1612

Hazardous Environment Power & Installation

Instructions

Cet équipement est conçu pour être utilisé uniquement dans des lieux de classe I, division 2,

groupes A, B, C et D, ou non dangereux.

AVERTISSEMENT - RISQUE D'EXPLOSION - Ne débranchez pas l'équipement à moins que le courant ne soit

coupé ou que la zone ne présente aucun danger.

AVERTISSEMENT - RISQUE D'EXPLOSION - La substitution de composants peut compromettre l'adéquation

à la classe I, division 2.

CET APPAREIL EST UN DISPOSITIF DE TYPE OUVERT ET IL FAUT L'INSTALLER DANS UN ENCEINTE ADAPTÉ

À L'ENVIRONNEMENT TEL QU'IL N'EST ACCESSIBLE À L'UTILISATION D'UN OUTIL.

AVERTISSEMENT - LE POWER JACK (bornes à vis, J1) est destiné exclusivement à la maintenance et ne peut

être utilisé que lorsque la zone est connue pour être exempte de concentrations inintéressantes de gaz ou

de vapeurs inflammables. IL NE DOIT PAS ÊTRE CONNECTÉ SOUS UN FONCTIONNEMENT NORMAL.

Dans les environnements dangereux, l'unité doit être alimentée entre 12-24 VDC, 860 mA (6 W) max.

Supervisé. L'appareil est certifié pour fonctionner entre -40 ° C et 50 ° C.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere RTA Tor Handbücher

RTA

RTA 460PSBMS-N2EW Technisches Datenblatt

RTA

RTA 460MSPBS-N70PB Technisches Datenblatt

RTA

RTA 460ESUS-NNA1 Technisches Datenblatt

RTA

RTA 460PSDM-N34 Technisches Datenblatt

RTA

RTA 460BCSC-NNA1 Technisches Datenblatt

RTA

RTA 460MMMRS-N700 Technisches Datenblatt

RTA

RTA 460PBSDFM-N70PB Technisches Datenblatt

RTA

RTA 460PSMC-N2EW Technisches Datenblatt

RTA

RTA 460MSBC-NNA1 Technisches Datenblatt

RTA

RTA 460ECUS-NNA1 Technisches Datenblatt

RTA

RTA 460ESUSB-NNCU Technisches Datenblatt

RTA

RTA 460ESPS-NNA4 Technisches Datenblatt

RTA

RTA 460DMDFM-N34 Technisches Datenblatt

RTA

RTA 460BSQT-NNA4 Technisches Datenblatt

RTA

RTA 460BMSSC-N2E Technisches Datenblatt

RTA

RTA 460ECQT-NNA4 Technisches Datenblatt

RTA

RTA 460AQT-NNA1 Technisches Datenblatt

RTA

RTA 460BMUSB-N70U Technisches Datenblatt

RTA

RTA 460BMUS-NNA4 Technisches Datenblatt

RTA

RTA 460TCP-N2E Technisches Datenblatt

RTA

RTA 460ECMS-N2E Bedienungsanleitung

RTA

RTA 460BCA-NNA1 Technisches Datenblatt

RTA

RTA 515ENI-N34 Technisches Datenblatt

RTA

RTA 460ESSC-NNA1 Technisches Datenblatt

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

Rosonix Technology

Rosonix Technology RSG-3000 Bedienungsanleitung