Thank you for selecting the R-Tech TIG161 Inverter AC/DC TIG Welder.
The TIG161 has many benefits over traditional TIG welders, including 50-250Hz AC
frequency adjustment, AC squarewave & balance control, full pulse welding, slope up/down,
remote foot option and an industrial 35% duty cycle
We want you to take pride in operating our TIG161 as much pride as we have taken in
making this product for you. Please read all information in this manual before operation
PLEASE EXAMNINE CARTON AND EQUIPMENT FOR DAMAGE IMMEDIATELY
When this equipment is shipped, title passes to the purchaser upon receipt from the courier.
Consequently all claims for material damaged in shipment must be made by purchaser against the
transportation company used.
Please record your equipment identification below for future reference. This information can be found on
data plate at rear of machine.
Product TIG161
Serial No. ___________________________________
Date of Purchase _____________________________
Where Purchased _____________________________
Whenever you request replacement parts or information on this equipment please always supply
information you have recorded above
This product is covered by 2 years parts and labour warranty, we will cover cost of collecting, repair and
returning item to you (UK mainland only, other areas are RTB). External items, torch, earth lead etc are
covered by 3 months warranty. Any faults/damage found caused by customer will be charged pro-rata
Pay particular attention to the safety instructions we have provided you for your protection
The level of seriousness to be applied to each section is explained below
WARNING
This statement appears where the information must be followed exactly to avoid serious personal
injury.
CAUTION
This statement appears where the information must be following to avoid a minor personal injury or
damage to this equipment.
