RuggON VIKING MT7030 Bedienungsanleitung

VIKING

Mobile Data

Terminal User¡s

Manual

Model: MT7030

v1.1

Contents

CONTENTS......................................................................................................................................2

SAFETY PRECAUTIONS.................................................................................................................3

REGULATORY AND CERTIFICATION.............................................................................................4

FCC..............................................................................................................................................4

CE MARKING......................................................................................................................................................... 5

LITHIUM BATTERYSAFETY STATEMENT..........................................................................................................................5

CHAPTER 1. PRODUCT INTRODUCTION......................................................................................6

HARDWARE SPECIFICATIONS.............................................................................................................................. 6

ENVIRONMENT....................................................................................................................................................... 7

I/O PORTS.............................................................................................................................................................. 8

DIMENSION ANDWEIGHT ..................................................................................................................................... 9

VIKING Standard......................................................................................................................9

PACKAGE LIST.....................................................................................................................................................10

CHAPTER 2. HARDWARE INSTALLATION ......................................................................................... 11

INSTALLING/REMOVING THE SIMCARD............................................................................................................11

CHAPTER 3. HARDWARE MOUNTING......................................................................................... 12

CHAPTER 4. START UP................................................................................................................ 12

POWERING THE SYSTEM....................................................................................................................................12

Installation Instructions............................................................................................................13

LED STATUS........................................................................................................................................................................17

ADJUST THESPEAKER VOLUME........................................................................................................................18

AUTO-BRIGHTNESSADJUSTMENT....................................................................................................................18

INTERNAL MICROPHONE.....................................................................................................................................19

PROGRAMMABLE BUTTONS...............................................................................................................................19

POWER MANAGEMENT.......................................................................................................................................19

CHAPTER 5. JUMPERS AND CONNECTORS..............................................................................20

BOTTOM VIEW .....................................................................................................................................................20

EXTERNAL CONNECTORS PINASSIGNMENTS.................................................................................................21

Power Connector.................................................................................................................... 21

Safety Precautions

Regulatory and Certification

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference thatmay

cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to whichthe

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Shielded interconnect cables and shielded AC power cable must be employed with this

equipment to insure compliance with the pertinent RF emission limits governing this device.

Changes or modifications not expressly approved by the system¡s manufacturer could void

the user¡s authority to operate the equipment.

Any changes or modifications not expressly approved by the party responsible

for compliance could void the user¡s authority to operate the equipment.

This device is operable in 5.15 ¡ 5.25GHz frequency range, then restricted in

indoor use only, Outdoor operations in the 5.15 ¡ 5.25GHz is prohibitive.

RF exposure warning

This equipment must be installed and operated in accordance with provided instructions and the

antenna(s) used for this transmitter must be installed to provide a separation distance of at least

20 cm from all persons and must not be co-located or operating in conjunction with any other

antenna or transmitter. End-users and installers must be provide with antenna installation

instructions and transmitter operating conditions for satisfying RF exposure compliance.

CE Marking

This product has passed the CE test for environmental specifications when shielded cables

are used for external wiring. We recommend the use of shielded cables. Please contact your

local representative for ordering information.

This product has passed the CE test for environmental specifications. Test conditions for

passing included the equipment being operated within an industrial enclosure. In order to

protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage,

we strongly recommend the use of CE-compliant industrial enclosure products.

Lithium Battery Safety Statement

Lithium battery inside. Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type of battery recommended by battery manufacturer.

THIS PRODUCT CONTAINS LITHIUM-ION BATTERY PACKS. IT MUST BE

DISPOSED OF PROPERLY. CONTACT LOCAL ENVIRONMENTAL

AGENCIES FOR INFORMATION ON RECYCLING AND DISPOSAL PLANS IN

YOUR AREA.

Chapter 1. Product Introduction

VIKING is an in-vehicle terminal with 7¡ high resolution display and 500nits brightness, and

is flexible to support a wide range of wireless connection capability. The device is well-suited

for fleet management, asset management, EOBR and ELDs application.

It is compliant to ISO 7637-2, SAE J1455 and SAE J1113 and its optimized power system is

designed for cold cranking, load dump, transient voltage and ESD.

The device is engineered with IP65 protection rating, a wide temperature design, wide input

range, and rich expanding interfaces that support in-vehicle connectivity.

Hardware Specifications

Item Description

Processor QualcommR Snapdragon? 660 Octa -Core, 1.9GHz

Memory 3GB LPDDR4 SDRAM

Storage 32GB eMMC, Micro SD slot x 1

Display

7¡ TFT LCD WSVGA (1024 x 600), , 500 nitsbrightness

Viewing angel: 145(H)/ 160(V) (CR>10)

Support auto-dimming

Touch Panel Capacitive multi touch (PCT)

Wireless

Connectivity

GNSS (GPS / GLONASS / BeiDou/ Galileo)

4G LTE / WCDMA / GSM

IEEE 802.11ac 2x2 MU-MIMO

Bluetooth V5.0

RFID/ NFC

Item Description

Power Input 9-36VDC,5A

Battery 1950mAh, 3.6V

Housing

(Mechanical)

PC+ABS, fanless design

Certification CE, FCC, CB

Environment

Operating temperature:

-20¢C (-4¢F) to 60¢C (140¢F)

In accordance with MIL-STD-810H Method 501.7 High Temperature Procedure II -

Operation

In accordance with MIL-STD-810H Method 502.7 Low Temperature Procedure II -

Operation

Storage temperature:

-30¢C (-22¢F) to 70 ¢C(158¢F)

In accordance with MIL-STD-810H Method 501.7 High Temperature Procedure I -

Storage

In accordance with MIL-STD-810H Method 502.7 Low Temperature Procedure I -

Storage

Relative humidity: 5% to 95% @ 30¢C (86¢F) to 60¢C (140¢F) non-condensing in

accordance with MIL-STD-810H Method 507.6 Humidity Procedure II Aggravated

Cycles

Vibration Test:

Operating: MIL-STD-810H Method 514.8 Category 4,

Fig 514.8C-2 Common carrier (US highway truck vibration exposure);

Fig 514.8C-4 Composite two-wheeled trailer;

Fig 514.8C-6 Composite wheeled vehicle.

Operating: IEC 60721-3-5 Class 5M3

Non-Operating: MIL-STD-810H Method 514.8 Category 24 Figure 514.8E-1

General minimum integrity

Shock Test:

Operation: MIL-STD-810H Method 516.8 Procedure 1 Functional Shock

Non-Operation: MIL-STD-810H Method 516.8 Procedure V Crash Hazard Shock

I/O Ports

Item Description

Serial RS-232 x 1 with 0/5/12V support 0.6/0.3A (COM1)

RS-232 TX, RX/422/485 x 1 (COM2)

USB USB 2.0 x 2

USB 3.1 type C x 1

Ethernet Gigabit Ethernet (RJ45 ) x 1

Digital I/O DI x 2, DO x 2

CAN Raw CAN bus, optional SAE J1939 support

Audio Audio headset jack x 1

Internal MIC-in x 2

Speaker Waterproof speakers 2W

40.80mm

Dimension and Weight

VIKING Standard

Dimension: 219.98 x 151.98 x 40.80 (mm) / 8.66 x 5.98 x 1.61 (in.) (W x H x D)

Weight: 1.25 kg/ 2.76 lbs.

Front View Dimension

219.98mm

151.98mm

Side View Dimension

Package List

Before you begin the installation or configuration process, make sure to inspect all the

components and accessories. Contact your representative if there are any missing or

damaged items.

Please verify the delivery of the contents upon receipt

VIKING in-vehicle terminal

2M Power cable with fork terminals

NOTE: The packaging material has been selected to optimally protect your device. After

unpacking, store the original packaging material in the event that you need to return for

shipment.

Inhaltsverzeichnis

Andere RuggON Handheld Handbücher

RuggON

RuggON RuggVMC MT7010 Bedienungsanleitung

Beliebte Handheld Handbücher anderer Marken

Honeywell

Honeywell Dolphin 9900 Bedienungsanleitung

Honeywell

Honeywell CN75 Bedienungsanleitung

MiTAC

MiTAC Mio 168 Bedienungsanleitung

Wasp

Wasp WDT92 Bedienungsanleitung

Texas Instruments

Texas Instruments TI-Nspire Bedienungsanleitung

AXEM Technology

AXEM Technology MBS Bedienungsanleitung

Armstrong

Armstrong Brain Wave Montageanleitung

Unitech

Unitech TB128 Bedienungsanleitung

Symbol

Symbol MC9000-G Installations- und Betriebshandbuch

Unitech

Unitech HT1 1D Batch Bedienungsanleitung

Ingenico

Ingenico IWL220 GPRS Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Symbol

Symbol c2000 Bedienungsanleitung

Symbol

Symbol MC18 Installations- und Betriebshandbuch

Acer

Acer n20 Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Docomo

Docomo F-04H Bedienungsanleitung

Toshiba

Toshiba e350 Series Bedienungsanleitung