RuiDeng DP50V5A Bedienungsanleitung

V3 mum I

gP^Ptril

mm,

r t i S M 0 - M 9 ± ± i m - .

lA Ji in ttiM 1 o^M 21^ M g:

iJlI±1, mBinB^„

intbJg^^ig^IlilJJg:

® gp^intiiii^tiijjg

mmm.

T i B I K ^ I

★31 ^ t ^ ^ S ii ^, 5 D1^ M N M, |)^ i n S 5lt 1] it ^

* B ^ ^ rt B iic j^ a M ^ M iff, Ds i n ^ s 5it 0 it ^

mTTmmu:^-%,T^^^mmmm\^:m^=mmMm-,

asjiffs?, mm,

itﬁ iit: iJff 51 ^ t/i !l 11 m t/b IX ^4 X 3131 ^

^iS:0571-89050390

4^:

ﬁt

f^ao^W

mf^im±

iJ±tliI^ii0-50.00V. 0-5.000A

DP50V5A

Please read this instruction carefully before using

Constant Voltage Constant Current

Rui I1ENG Programmable Control Supply Power Module

Product model; DP50V5A

Ipfor

General Information

The constant voltage and constant current programmable control power

supply module put the collection of analog integration and digital control

functions in one. Its adjustable output voltage range is 0-50.OOV, step by

0.01V. Its adjustable output current range is 0-5.000A, step by 0.001 A.

This module has power-down stored function and can store 10 groups

preset value. And it also has the function of extracting quickly two groups

stored value. Compared with the traditional analog power supply, it is more

convenient to quickly extract the voltlage or current required. LCD display

on the module has the function digital voltmeter and ammeter. You can view

the preset voltage, input voltage, output voltage, the preset current, output

current, output power, etc. on the output state remind area, you can see that

output opens or not, the state of constant voltage and constant current,

output is normal or not, the key is locked or not, and the current data groups

that is being used. On the setting data interface, you can adjust over-voltage

value, over-current value, over-power value, data set and LCD brightness.

This module has many advantages, small size, advanced fu n c t i o n ,

good visual effect, high operability, high-precision, being used

independently, being inset into the device and been widely applied.

ITechnical parameters T

Input voltage range: 6-55V

Output voltage range: 0V-50.00V/

Output current: 0-5.000A

Output power range: O-2&0V\

Product Welght:113g

Output voltage resolution: 0.01V

Output current resolution: 0.001 A

Product Dimension: 79mmX43mmX48mm

Open size: 71mmX39mm

Output Voltage accuracy: + (0.5% + 1 digit)

Output Current accuracy: + (0.5% + 2 digits)"

Note: You must make sure that input voltage is 1.1 times higher than

output voltage .Under large current circumstances, pay attention to heat

elimination.

IConnection description

IN+: Input positive IN-: Input negative

OUT+: Output positive OUT-: Output negative

Note: Input voltage range is 6-55V and 55v

is the limit voltage; please leave a room to use,

or else it will be burnt. The input must be

DC-DC, not AC 220V, or else it will be burnt

too. Though this module has reverse

connection protection and output shod circuit

protection, you must be in strict accordance

with connection description to connect. If you OUT- OUT+

connect the supply power with output, the module will be burnt.

Panei description I

Shortcut extract M1 data

group/ Page up to choose"

of the speciﬁed data group/

Store value into the

speciﬁed data group

Shortcut extract U2 data „

group/ Page down to choose

1.44 inch color

LCD screen

Coding potentiometer/

Data adjustment/ Lock

all buttons

Open or close output

IDisplay interface description I

The preset value,

of output voltage'

The actual value

of output voltage '

The actual value

of output current'

The actual value

of output power

The actual value

of input voltage

Preset output voltage =

Preset output currents

Preset over-voltage =

Preset over-current =

Preset over-power=

Preset screen

brightness

Preset data set

SET:36.00 2:000

36.00Vt

1.005AI

i M

U-IN: 42.97'0®

The preset value

"of output current

- Key lock or unlock prompt

OUT j37^00 li005

U-SET 37.00U m

I-SET 2.000A 'M

S-OUP 50.001^^

S-OCP 2.000A fc

99.99U ^S-OPP

B-LED ■■■■■5 ■"

M-PRE M0 OFF m

— Output normal or not prompt

_Constant voltage and constant

"current status prompt

Data set prompt

— Open or close output prompt

The main interface

^ The actual value of output' voltage and outputcurrent

Data setting interface

Im. tT .iSJ 90 I

DP50U5A

Ul.O

SET:36.O0 2.000

36.00Vf

1.005A|

U-IM: 4Z.97U®

±nm

« ± 7 d s ^ M i s ^ n m m M ,

A M ^ ^ l u

imm,

P ^ S M ﬁ i l ^ i s 1 J ﬁ S ,

^ ^ ^ IS M ilil It _ P ^ ai ^ . 11 J± 11 ii. It

;J\IT/S. FF^?|iiaiIT^o

e , m ®

U-SET. l-SETiit, [l#^iS^|i[ai.J±%;j?£lI, iS^

7DiSfql±Pci^)iS^-S(o

iiUMS-ovp. S-OCP, s-oppiih, :iasuql3?ti±li11, iiilil.

® i i a i i S M „ o ^ s - 5

m, o^ssBg, mmm, iis^A»0si3is:^„

^J^5^^1iLt§^l^i^»0N/0FF, i^lfONBt, iHaiilMeilgPMiffWIi

i ^ s o F F B t , i i i a i K i g i i g D M i T i B ^ a 5 a „ m m i M E

mmmm ME

AiSM, ^ pmrn^^th^A

0UT;37.ﬂa i.ms

ll-SET:37.e0U |l&

i-SET:2.M{W ^

S-OUP:5«.O0U ^

S-OCP:2.0O0ﬂ fA

S - 0 P P : 9 9 . 9 9 U < "

tt-PﬂE:nO OFF 9

m m u

IN + : ! i iA I E m OUT + :!^ t l iE t S

$ByA%Emil: DC6-55V

/:£:55v;/5tspg*Mmffi, m-m

mmmA, AqJ®ffl5^}I220V

iHA iiiA

$ i ) t B ^ s S § i S ? i ^ , f i i t s f i i i f i

mi-,

OperatingMnstructions

ilJgiSM/iJillil

ll5tii^.EiS;^-

m u

1. 44Tt^fe

S 7j^ P

Mmw

K a W'B ia aa J

OUT 37.00 1.005

U-SET 37.000 in

I-SET 2.0000

S-OUP 50 .^00

S-OCP 2.0000 0'

S-OPP 99.99U

B-LED ■■■■■ 5

M-PRE M0 OFF

tiE/ii;iyic;S^g^

«f4«

DP50U5ﬁ

U1.0

Welcome window

SET:36.HH ?..mv\

36.00Vf

1.005A|

U-IM: 42.97U m

Main interface

When connect the power supply, the

screen shows welcome window ﬁrstly

a n d t h e n c o m e s i n t o m a i n i n t e r f a c e .

On the main interface, the output set

voltage value and the output set current

value is on the top of the screen.

The big font value on the left are the

actual output voltage, the actual output

current and the actual output power. Input voltage is on the bottom of the

screen. There are some running status icons on the right of the screen,

key lock icon, abnormal output status icon, constant voltage and constant

current icon, data settip icon and opening or closing output icon.

Set the output voltage and output current on the main interface.

On main interface, press |set| shortly, you can enter into data setting

status. Press coding potentiometer to enter into the status of adjusting

the numerical value you wantto adjust. Turn coding potentiometer to adjust

the numerical value. Turn by clockwise rotation to increase the numerical

value; Turn by counterclockwise to decrease the numerical value. If you

want to exit adjusting the numerical value, press |set| shortly. In the same

time the preset value will be stored. Oryou can do nothing in one minute,

the status will be automatically existed and the preset value will be stored

too.

Set the data on th^ data setting Interface

On the main interface, you can press |set| twice to

enter into the data setting interface. On the data setting

interface, press shortly |Ml/t| or |M2/4| to page up or page

down to U-SET or l-SET, the operation way is consistent

with the way of setting the output voltage and output

current on the main interface.

Set the protection value.

Page up or page down to S-OVP, S-OCP or S-OPP place

to set over-voltage value , over-current value and over-power

value correspondingly; when the value is up to the setting value, output

will be closed. And then press shortly the coding potentiometer to enter

into the status of adjusting the numerical value you want to adjust. Turn

coding potentiometer to adjust the numerical value. If you want to exit

adjusting the numerical value, press shortly [set| key.

Adjust the brightness of screen. .

Page up or page down to B-LED, and then press shortly the coding

potentiometer to enter into the status of adjusting the brightness of screen.

Turn coding potentiometer to adjust the numerical value you need. If you

want to exit adjusting the numerical value, press |set| shortly. There are

six brightness levels of LCD screen, 0-5 level. Rank 0 is the darkest; rank

5 is the brightest. You can choose what you like.

OUT;37.00 l.BHb

U-SET:37.00U

l-SET:2.0000

S-OUr:50.00U V.

S-OCP:2.0000 ->4

S - O P P : S S . 3 S U - -

B-LED

n-PRE:tt0 OFF 9

Data setting

interface

Data setting and store the speciﬁed data group.

Page up or page down to M-PRE, and then press shortly the coding

potentiometer to enter into the status of choosing the data groups. Turn

coding potentiometer to choose the data group you need to view. Then the

data group you need will be displayed. And then press the coding |set|

potentiometer to enter into status of changing output state. Turn coding

potentiometer to choose ON or OFF. When choose ON, the data group is

extracted and the output status remain the same. When choose OFF, the

data group is extracted and the output is closed. If you want to exit choosing

the data group, press [set| shortly. Then press shortly |Mi/t| or |m2/<|

to page up or page down to other place to adjust the data you need. After

data setting done, keep pressing [^f] more than 2s, all the data you set

are automatically stored into the speciﬁed data group. In the same time,

you can see thegroupnumberonthe right of screen. Now you can press

I SET I shortly back to the main interface.

IFunction ition

Open or close the output:

You can press (Q) to open or close the output on any interface.

Lock the button to avoid wrong operation:

On the any interface, you can keep pressing coding potentiometer more

than 2s, all buttons are locked. You can see the key lock icon on the right

of scr e e n. If you wa n t t o unlock a l l b uttons , k e ep press i n g coding

potentiometer more than 2s, all buttons are unlocked. The key unlock icon

will be display on the right of screen.

M0-M9 ten data groups:

MO group is the boot default data group. When you extract the data group

you need, this data group will cover MO data group and be automatically

stored on MO data group.

Extract Shortcut storage data group M1 or M2:

On the main interface, keep pressing |Mi/t[ or |M2/t| more than 2s, the

corresponding data group will be extracted. In the same time the

corresponding data group number will displayed on the right of the screen.

Extract the speciﬁed data group:

On the main interface, keep pressing |set| more than 2s, the sequence

number of data group will be displayed on the right of the screen, you can

turn coding potentiometer to choose data group you need. And then press

|set| shortly, you can extract the speciﬁed data group you need.

S Hangzhou Ruideng Technologies Co., Ltd

®r J

Ijft^'ilU'l^I^iiO-SG.OOV/O-S.OGOA

rSoM^:DP50V5A

rrDO I'sj ft

-Jk-. I

$itiy^.i±o-5o.oov

t&ao.001A„

IﬁSS,

DP50V5A tilK]^SI: 0-250W

m t i i ^ J I ^ S l : 0 - 5 0 . O O V $ i y t l i ^ , / l l 5 S l : 0 - 5 . 0 0 0 A

79mmX43mmX48mm

71mmX39mm

0.01V

o.ooia

± ( 0 . 5 % + 1 ^ ^ )

Andere RuiDeng Steuereinheit Handbücher

RuiDeng

RuiDeng DPH3205 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung