Ruijie EG3000 Series Bedienungsanleitung

Dieses Handbuch passt für folgende Modelle

3

Inhaltsverzeichnis

Andere Ruijie Tor Handbücher

Ruijie

Ruijie RG-EasyGate Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-EG3230 Installations- und Betriebsanleitung

Ruijie

Ruijie RG-EG2100-P V2 Installations- und Betriebsanleitung

Ruijie

Ruijie RG-EG3250 Installations- und Betriebsanleitung

Ruijie

Ruijie RG-EG2100-P Series Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

EG3000 Series Quick Start Guide

[EG3250, EG3000UE/XE Model]

1. WAN Uplink Quick Setup

1) Modify the IP address of PC.

IP address: 192.168.1.x (except 192.168.1.1)

Subnet mask: 255.255.255.0

Default gateway: 192.168.1.1 (default LAN IP)

2) Connect the PC to any port (except WAN0) on the device.

3) Visit http://192.168.1.1 by Chrome browser.

4) Enter the username and password on the login page and click “Log In”.

Default Username: admin

Default Password: admin

5) Change the password at the first login.

Select a scenario.

Configure the WAN port (DHCP, Static IP or PPPoE).

It is not recommended to change the IP of LAN port; otherwise, you may need to log in and

configure again. After wizard completes, you can configure LAN port on the interface

configuration page.

6) Click Dashboard to open the homepage, or click Interface to enter the interface configuration

page. If the WAN port is connected to the Internet, you can access the Internet now and add the

EG to the Cloud.

2. Add Device to Ruijie Cloud

1) Open the Ruijie Cloud App, tap Create Network, and enter the network name and SSID.

2) After the network is created, enter the network and tap Add Device to add AP and EG3250 by

scanning the QR code (AP SN/MAC) on the back of the device (Note: There is no QR code behind

EG3000UE/XE, so please manually enter SN). When adding an EG, you need to enter its Web

management password.

3) Wait for about 3 to 5 minutes, and you can see the online status of EG device.

The SN/MAC QR-Code demo on the back of EG:

3. Access EG Web from Cloud

1) After an EG comes online on the Ruijie Cloud, you can visit its eWeb page for advanced

configuration. Select the EG in the Gateway List, and click eWeb.

2) After the tunnel is created, the Web management page will open automatically, as shown

below:

3) If the following information is displayed, click Proceed to enter the eWeb system.

4. Common Functions

Click Common on the menu for commonly-used functions.

5. Cache Configuration

EG supports static resource (such as image, video and file) cache and App cache (both on iOS and

Android).

Cache is disabled by default. You can enable it in the Service menu (device will restart).

5.1 Resource File Cache

Static resources, including files, images and videos, can be cached on EG.

Step1: Set up one HTTP server and upload the file to be cached.

Step2: Enable the cache, and input the resource address (MUST be based on HTTP resource).

Example

When cache is disabled, the traffic mainly comes from WAN:

When cache is enabled:

As the file is downloaded from cache, the WAN traffic throughput is lower and the Internet

bandwidth is saved. Even when the Internet bandwidth is limited to 0.5 Mbps, the download

speed can reach 15.5MB/s (124Mbps).

5.2 iOS App Cache

Step1: Enable APP Cache and select iOS-based App.

Step2: Enter the App server address and enable all HTTP. Keep the App name and App address

empty.

Step3: After STA begins to download the App from App Store, you can check the EG cache status.