Rushstage 3000RGB Bedienungsanleitung
User Manual for 3000RGB
Please read this manual fully Before operating
this laser !
1
Dear customers:
Thank you for choosing our laser series products. To get better
experience, please read this manual carefully before using it.
This product has been strict controlled from design to production, and
conforms to the use requirements of international standard agreements.
Sufficient aging tests will be carried out on the product before leaving the
factory to ensure your use experience.
1) We will continue to focus on products’research, development and
technical improvement to create better experience effects, so we reserve the
right to make changes to the products, not do inform, the manual just for
your reference, the final based on the products you received.
2)The content of this manual is limited, just for your reference. We’re
not undertake any responsibility for its accuracy or omissions.
2
1、Package contents
1 x laser projector
1 x power cable
1 x interlock connector
1 x keys
1 x manual
2.Function description
1
ILDA IN/OUT
5
LCD display
9
ON/OFF
2
Safety O-ring
6
Adjust switch
10
Fuse
3
DMX IN/OUT
7
Key switch
11
Power
connection
4
Handle
8
Interlock
1）ILDA IN / ILDA OUT: ILDA signal connector
2）Safety O-ring：Hang a safety rope
3）DMX IN/DMXOUT：DMX signal connector, multiple units can be connected
3
in series
4）The handle：Links to link
5）LED Display：machine control the display
6）Adjust switch：Rotate left and right to adjust, press OK
7）KEY：when key switch on, the light will go out
8）Internet lock：connect the remote adapter to the interlock, the laser
will only be operate when the remote adapter is plugged in.
9）OFF/ON：power on/off
10）FUSE：safety protection
11）Power AC:110-250V：power connector（wide voltage）
3、Product parameters
Product name
3W RGB laser projector
Product model
SUP-3
Power/Wavelength
R：500mw 638nm
G：850mw 520nm
B：1650mw 455nm
Divergence
<1.1mrad
Control mode
ILDA,DMX512,AUTO,SOUND,MASTER
Laser source
Semiconductor diode
modulation mode
Analog modulation
modulation frequency
100HZ
Scanner system
20kpps
Voltage
AC 100-240V, 50/60HZ
Power
<65W
4
4、Operations
1）The laser light must need put the Keys and interlook, Picture below
2）When the machine is connected to IDLA line, the system will default to
IDLA control mode, and other control modes will not be able to start When
using control modes other than IDLA control (such as voice control,
self-walking, etc.), the IDLA mode should be adjusted to the closed state in
the control panel
Cooling way
Fan cooling
Working temperature
-10℃-45℃
Size
220(L)*170(w)*130(H) mm
Weight
3.85KG
Occasion
KTV, CLUB, banquet hall, stage
5
3）
LED indicator
Select Menu
1、LED indicator status description:
Laser Key RG:Slow
Safety Protected R: ON G:OFF
DMX And Slave Mode RG:Fast
Auto Mode R: OFF G:Slow
Music Mode, R: Fast G:ON
ILDA Mode R: OFF G:Fast
2、Select Menu
Select the desired function menu by rotating left and right, the
menu height is selected, and press OK/return to the selected function.
2、LCD menu function as below table:
Mainmenu
Submenu
3rd Submenu
1、DMX-512
Mode
DMX-512 Mode
Address 001
Channel Expert
Address Setup
001
Channel Setup
Normal Mode
Expert Mode
2、Auto Mode
Auto Mode
Effect
Mix
AutoSpeed 50%
Auto Effect
Mix Show
Lines Show
Beams Show
DMX-512 Mode
Auto Mode
6
Auto Speed
50%
3、Music Mode
Music Mode
Effect
Mix
MusicSpeed 50%
Music Effect
Mix Show
Lines Show
Beams Show
Music Speed
50%
4、Laser Light
Laser Light
Scanner 20KPPS
Color RGB
Laser Analog
Invert Normal
Image Size X Y
Position X Y
Scan Rate
20KPPS
Color Setup
Single
RGY
RBP
GBC
RGB
WYPC
Laser Type
TTL
Analog
Normal
invert X
invert Y
invert XY
Image Size
Size X
Size Y
Position Setup
position X
position Y
5、Settings
Settings
Reset Default
SafetyProtected
Master Setup
Back Light
Language
Reset Default
Yes
No
SafetyProtected
Turn ON
Turn OFF
7
3、DMX-512 Channel explain：
1、Normal Mode 12CH table:
Channel
Value
Function
CH1
Turn on/off
0
Turn off
1～255
Turn on 1-100%
CH2
Red brightness
0～255
Red brightness 0~100%
CH3
Green brightness
0～255
Green brightness 0~100%
CH4
Blue brightness
0～255
Blue brightness 0~100%
CH5
Graphics switch
0～255
Graphics switch
CH6
Graphics size
0～255
From biggest to smallest selection
CH7
Horizontal positi
on
1～255
Horizontal position selection
CH8
Vertical position
1～255
Vertical position selection
CH9
Color
0~63
Fixed seven color selection
64～95
Change color effect speed selection
96～127
Display Setup
About System
Master Setup
Turn ON
Turn OFF
Back Light
Normally ON
Delay 15S OFF
Language
Chinese
English
Display Setup
Rotate 180deg
NormalDisplay
LaserSystem2.9
Software
Version 1.0
YM:20190301001
6、NetILDA Mode
NetILDA Mode
Turn ON
Turn OFF
8
128～159
Flowing water effect speed
selection
160～191
192～223
224～255
Gradient effect speed selection
CH10
Flash effect
1～255
Flash effect speed selection
CH11
Static pattern
0～127
Static pattern selection
Dynamic pattern
128～255
Dynamic pattern selection
CH12
Auto mode
0～127
Auto speed selection
Sound mode
128～255
Sound sensitivity selection
2、Expert Mode 21CH table:
Channel
Value
Function
CH1
Turn on/off
0
Turn off
1～255
Turn on 1-100%
CH2
Red brightness
0～255
Red brightness 0~100%
CH3
Green
brightness
0～255
Green brightness 0~100%
CH4
Blue brightness
0～255
Blue brightness 0~100%
CH5
Graphics switch
0～255
Graphics switch
CH6
Graphics size
0～255
From biggest to smallest selection
CH7
Horizontal posit
ion
1～255
Horizontal position selection
CH8
Vertical position
1～255
Vertical position selection
CH9
Color
0~63
Fixed seven color selection
64～95
Change color effect speed selection
96～127
128～159
Flowing water effect speed
selection
160～191
192～223
224～255
Gradient effect speed selection
CH10
Flash effect
1～255
Flash effect speed selection
9
CH11
Static pattern
0～127
Static pattern selection
Dynamic
pattern
128～255
Dynamic pattern selection
CH12
Auto mode
0～127
Auto speed selection
Sound mode
128～255
Sound sensitivity selection
CH13
Rotation
1～255
Rotation speed selection
CH14
Flip horizontal
1～255
Flip horizontalspeed selection
CH15
Flip vertical
1～255
Flip vertical speed selection
CH16
Horizontal
movement
1～255
Horizontal movement speed
selection
CH17
Vertical
movement
1～255
Vertical movement speed selection
CH18
Zoom
1～255
Zoom speed selection
CH19
Gradient
1～255
Gradient speed selection
CH20
Line scanning
speed
0～127
Line scanning speed selection
Beam scanning
speed
128～255
Beam scanning speed selection
CH21
Horizontal wave
1～127
Wave speed selection
Vertical wave
128～255
5、Installation instructions
1) The equipment should be fixed and installed. Please ensure the stability
and load-bearing of the installation point.
2) Before installation, please ensure that the power supply voltage meets
the requirements, and ensure that it is connected to the main socket with
ground wire
3) Please ensure that the ventilation fan is unblocked
4) Safety rope must be installed when installation
5) Safety beam and drop height
Depending on most variances, the device beam must be at least 3 meters
Inhaltsverzeichnis
Andere Rushstage Beleuchtungsausrüstung Handbücher
Beliebte Beleuchtungsausrüstung Handbücher anderer Marken
Qazqa
Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung
Commercial Electric
Commercial Electric 54568141 Bedienungsanleitung
CREE LIGHTING
CREE LIGHTING 304 Series Bedienungsanleitung
Goobay
Goobay 49867 Bedienungsanleitung
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Bedienungsanleitung
Alkalite
Alkalite Krypton KT-81 Bedienungsanleitung
