Rushworks PTX Model 3 PRO Bedienungsanleitung

PRO

The PTX Model 3 PRO easily accommodates most camera/lens combinations, including models from Blackmagic, Sony, Panasonic, Canon, Red, Arri and more.The PTX Model 3 PRO is the third generation of our robotic pan/tilt heads. Designed and built in Texas USA, it provides a rock solid, whisper quiet platform for your camera and lens investment.SUPPORT888.894.7874 opt 2

At 43 pounds/19.5kg it has the mass needed to manage large payloads, and the torque generated by two large stepper motors that do the heavy lifting. It communicates with controllers using VISCA over IP, and features multiple passthrough connections for SDI, HDMI, USB, DC camera power and network. ConnectivityThe PTX Model 3 PRO provides passthrough connections between the base and arm, providing flexible connections for a variety of cameras and camcorders. This minimizes cable strain by centralizing cable routing through the central core of the fixture. PASSTHROUGH TO ARMSDI 1SDI 2SDI 3HDMINETWORKRESETJOYSTICKFW/DIAGCAT64PINExample Use Case 1: Camera with SDI OutConnect SDI out from the camera to the SDI 1 connector on the arm.Connect SDI 1 on the base to an input on your video switcher.Example Use Case 2: Camera with HDMI OutConnect HDMI out from the camera to the HDMI connector on the arm.Connect HDMI on the base to an HDMI input on your video switcher.Example Use Case 3: DC power for larger cameraConnect DC power source to 4PIN connector on the base.Connect 4PIN connector on the arm to camera 4PIN DC power connector.Example Use Case 4: DC power for smaller cameraConnect 12V DC (MAX 1A) on the arm to 4PIN connector on the camera.

Communications InterfaceThe PTX Model 3 PRO responds to commands and inquiries using VISCA over IP communications protocol. This protocol is available through many hardware and software joystick controllers. Here is a list of the supported commands.

PAN TILT DRIVEUpDownLeftRightUpleftUprightDownleftDownrightStopAbsolute PositionHomeResetPAN TILTRamp Curve*Pan Tilt Limit*PRESETResetSetRecallPreset Drive SpeedTALLYOn/OffSYSTEMPan ReverseTilt Reverse

COMMANDS

PAN TILTPositionRamp CurvePan Tilt LimitPRESETPreset drive speedPresetTALLYOn/OffSYSTEMPan ReverseTilt ReversePOWER STATUSOn/OffSW VERSIONVendor IDModel CodeROM VersionSocket Number

COMMAND INQUIRIES

PTX Model 3 PRO VISCA over IP is also integrated in the PTZ/PTX camera control software in RUSHWORKS VDESK™ Integrated Robotics Production Systems, as well as the RUSHCONTROL™ camera control software application (Windows). *not functional in the initial release

Connecting your PTX Model 3 PRO head(s)Since the head requires an network connection, you need to identify an IP address and port number to establish communications.Using a CAT 5 or 6 cable, connect the PTX fixture to the network switch you wish to use. It’s highly recommended that you do NOT use a general purpose office network switch since there is often a lot of traffic that can interfere with IP production system component operations.Connect your VISCA over IP controlling device (joystick) to the same network switch. You’ll need to set the network IP address for both the controller and the PTX head(s).In this example we’re using the RUSHWORKS RW/JOYCON VISCA over IP joystick controller that supports up to seven (7) PTX and/or PTZ heads. This device provides manual joystick control as well as the ability to save and recall up to 256 presets. You can also set the PTZ Speed which applies globally to all connected devices.The controller and PTZ camera must be connected to the same LAN, and IP addresses must at the same segment. For example: 192.168.1.123 is at the same segment with 192.168.1.111 192.168.1.123 is not at the same segment with 192.168.0.125The default setting for the IP controller is to obtain the IP address dynamically. CAM1~CAM4Quickly switch to CAM NUM 1-4 devices (IP VISCA)PRESETUse a short press to set presets; a long press to delete presets.It needs to work with the number keys and ENTER button for setting or deleting presets.There are many VISCA over IP controllers available, including a versatile product lineup from www.skaarhoj.com Just follow the operations guide for whatever controller you choose. The basic connections and operations are very similar between and among the different models.

IPManually add network devices in IP VISCA mode.CAMIn IP VISCA and ONVIF modes, it will quickly switch to the CAM NUM bound device when adding a device via CAMNumber keys 1~92,4,6,8 serve as direction keys as well, which can control pan and tilt rotation, and camera OSD. ESC - ReturnENTER - Confirm ButtonPTZ SPEED- PTZ SPEED+Adjust PTZ Speed: 1 (Slow) - 8 (Fast) BASIC SETTINGSMove the joystick up and down to switch between the 8 settings.Move the joystick left and right to switch On and Off the button sound prompts. Confirm your choice by clicking the ENTER button. (1)Delete device (2)Network Type: dynamic and static(3)Button sound prompt: on and off(4)Language setting: Chinese and English (5)Mode: VISCA, IP VISCA, ONVIF, PELCO(6)Local IP (7)Version information (8)Restore factory settingsIP VISCA Mode SettingMove the joystick up and down to view devices.Move the joystick rightward to view the device’s port information.Move the joystick leftward to view the IP, CAM NUM information.Press ENTER to delete the selected device. Connection and Control in IP VISCA Mode (1) Manually add device via the IP button.(2) Press the INQUIRE button to view the added device(3) Move the joystick up/down to view the saved device (4) Move the joystick rightward to view the port)(5) Press the ENTER button to select a camera to control, or use the CAM button to connect and control.

In development is a simple and easy-to-use Web interface for the PTX Model 3 PRO. It will provide remote connectivity for monitoring and updating many operational parameters of the head. As more features and functionality are added, this will be a simple connectivity path for maintaining current and evolving configurations. Maintenance & Firmware UpdatesCurrently, firmware/version updates require a Windows computer at your site connected to the PTX via a USB A (computer) to USB B (PTX) cable, which is included in your PTX Model 3 PRO shipping container. USBTYPE AUSBTYPE BA RUSHWORKS Support Team member will need to connect to that computer via LogMeIn, Teams or other method of your choosing in order to manage the updates. We will create a RUSHWORKS folder on that computer into which we’ll place necessary utilities and program tools. When an update is complete we will terminate the connection and notify you that the computer’s USB cable can be disconnected from the PTX. At that point do the following:1)Turn the the PTX power OFF2)Wait 10 seconds, then turn the PTX power ONThe PTX will then inititalize and return to the Home position, ready to accept VISCA control over IP (presuming you have the connection established with your controlling device).

Web Interface & Firmware UpdatesThe easy-to-use Web interface for the PTX Model 3 PRO provides remote connectivity for monitoring and updating many operational parameters of the head. As more features and functionalities are added, this provides a simple connection path for maintaining current and evolving functionality. Securing your Camera to the Tilt PlateThe aluminum tilt plate has seven (7) slots for mounting your camera/lens. There are two (2) threaded thumbscrews included with the PTX Model 3 PRO. These are secured into the plate for shipping only. Remove both screws.Align one or both screws with the¼”x 20 threaded mount(s) on thebase of your camera. Select the slot that best balances your payload.Example 1: single screw into base of Blackmagic Pocket Cinema Camera.Example 2: two screws into sled mount for long lens on Blackmagic Studio Camera.(Secure sled through slot on Tilt Plate)

Model 3

PRO

Rigging and Mounting Accessories

The PTX Model 3 PRO has three (3) offset ⅜” threaded connectors on the bottom chassis plate for mounting and balancing the payload on heavy duty tripods and/or similar devices. If you plan to mount the fixture for inverted operation you’ll likely need one or more of the items in the Rigging and Mounting Accessories kit. RUSHWORKS.tv 888.894.7874Baby to ⅜” malethreaded adapter2 x steel eyebolts or safety cableSteel safety cableBaby pipe clamp(for 1.5” to 2” pipe)Ceiling mount for pipe arm extender+High payload tripod with ball adapterWall mount shelf$70$20$16$20Ruggedized shipping casew/handles, wheels, foam$60$800$175$400

Inhaltsverzeichnis

Andere Rushworks Aufnahmegeräte Handbücher