Russell Hobbs RHB03 Installationsanleitung

INSTRUCTIONS AND WARRANTY

MODEL NO. RHB03

RUSSELL HOBBS

MASTER BLENDER

Thank you for purchasing the Russell Hobbs Master Blender. Each unit has been

manufactured to ensure safety, reliability and ease of use. Before use, please read these

instructions carefully and keep them for further reference.

FEATURES OF THE RUSSELL HOBBS MASTER BLENDER

•6 blades to break down ingredients more effectively

•Blades positioned on different levels results in improved blending efficiency

•Suitable for chopping, crushing ice, making smoothies, blending soups or puree’s

•Powerful 800W motor

•2L plastic jug capacity

•2 speed settings with pulse

•1 x whipping whisk for whipping cream, meringue or mousse

•Dishwasher safe parts

•Non-slip feet for added stability

•For domestic use only

•2 year warranty

IMPORTANT SAFEGUARDS

When using any electrical appliance, basic safety precautions should always be followed

including the following:

1. Read all instructions and save the instructions provided with this appliance.

2. Do not put the motor unit in water or any other liquid; do not use it in a bathroom or near

any source of water.

3. Do not use outdoors.

4. The blender must be used only by a responsible adult.

5. Switch OFF and unplug the blender from the main power supply outlet before dismantling

or cleaning.

6. Turn the switch to standby “0” / “OFF” before fitting/ removing the jug to/ from the motor/

base unit.

7. Turn the switch to standby “0” / “OFF” and wait until the blades come to a complete stop

before removing the lid from the jug, and before removing the jug from the motor/ base

unit.

8. This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction concerning use of the

appliance by a person responsible for their safety.

9. Children should be supervised to ensure that they do not play with the appliance.

10. Do not use the blender without first locking the lid in place.

11. Be careful if hot liquid is poured into the appliance as it can be ejected out of the appliance

due to a sudden steaming.

12. Do not use hot liquids.

13. Whisk attachment cannot be used with hot liquids in blender.

14. When handling the blade attachment, always hold it by the shaft.

15. Do not attempt to sharpen the blades.

16. Do not use the appliance if blade attachment is bent or damaged.

17. Do not put your hand into the jug, even when it has been removed for cleaning –the

blades are very sharp.

18. Do not come into contact with moving parts.

19. To avoid an electrical shock, do not submerge the appliance or allow the power cord to

come into contact with water or any other liquid.

20. Do not put any other object (spoon, spatula, etc.) into the jug while the blender is

plugged in.

21. Do not leave the blender unattended when plugged in.

22.Do not operate this appliance on or near any hot surfaces (such as a gas or electric

burner or heated oven).

23. Misuse of this appliance can result in injury.

24. Position the motor unit on a dry, firm, level surface, close to a power socket and

out of reach of children.

25. Route the mains lead so that it cannot be caught accidentally or tripped over.

26. Keep the blender and the mains lead away from hotplates, hobs and burners.

27. Store the blender away from direct sunlight and fluorescent light where possible.

28. Do not let the jug overflow. If liquid gets under the motor unit, it may be

sucked into the motor, damaging it.

29. Do not fill the jug above the MAX. mark. If you do, the contents may force the lid

off when you start the motor.

30. The blender is equipped with a powerful motor and therefore processes very

quickly. Due to its efficiency, there is no need to run the motor for more than one

minute at a time.

31. Do not run the motor for more than a minute, either continuously, or using the

pulse setting, otherwise it may overheat. After one minute use, switch it off for at

least 2 minutes allowing it to cool to room temperature and allowing it recover.

32. Do not use the blender for any purpose other than those described in these

instructions.

33. Do not run the blender empty, as it may overheat.

34. Do not operate the blender after it malfunctions. If the mains lead or plug is

damaged, return the blender to the manufacturer in order to avoid any hazard.

35. Children should be supervised to ensure that they do not play with the appliance.

36. Always turn the power off at the power outlet before you remove the plug.

Remove by grasping the plug. Do not pull on the electrical cord.

37. This appliance is designed for processing household quantities; it is not suitable for

commercial purposes. Use the appliance only for the purpose it was designed for.

38. Do not use this appliance if it or parts of it show visible damage or if the appliance

has been dropped.

39. Do not attempt to make any modifications to this appliance.

40. To avoid any risk and to remain within warranty, repairs to this appliance must be

carried out by an authorised service agent only.

41. To reduce the risk of injury, never place the blade assembly on the base without

the jug properly attached.

42. If the supply cord is damaged, it must be replaced by the manufacturer, its

authorised service agent or similarly qualified persons in order to avoid any

hazard.

43. Switch off the appliance and disconnect from the power supply before changing

accessories or approaching parts that move when in use.

44. Use only accessories provided by the manufacturer for this appliance.

45. Do not run this appliance with an external timer or remote control system.

PARTS DIAGRAM

a. Lid

b. 6-Blade attachment

c. Jug

d. Motor base

e. Control knob

f. Whisk attachment

g. Non-slip feet

ASSEMBLY INSTRUCTIONS

Caution: When placing the jug on the motor base or removing it,

ensure that you do not touch the blades as they are very sharp!

Assembling steps

1. Place the 6 blades or whisk attachment into the

jug.

2. Place the lid on the jug, the lock and unlock

markings are on the right hand side of the jug

handle. Rotate it to the left to lock. When the

prominent position is right against the handle.

Then the lid is correctly fitted.

3. Put the jug on motor base, rotate it to left and

make sure the triangle marking on handle is

opposite to the lock marking on motor base. The

jug would then be in the right position.

OPERATING INSTRUCTIONS

1. Place the motor base on a clean, dry, level surface such as a counter or table top.

2. Hold the 6-blade/whisk attachment by the shaft then place it onto the gear shaft inside

the jug.

3. Ensure that the attachment fits perfectly around the gear shaft and that it is standing

straight.

4. Ensure the unit is off before adding the ingredients and secure the lid onto the jug. Do

not exceed maximum level mark.

5. Place the jug onto the motor base.

6. Plug the power cord into the electrical outlet and select the speed to start the machine.

7. Don’t remove the lid from the jug while the blender is ON.

8. Operate the preferred speed setting for 1 minute.

9. Let the product and mixture cool down to room temperature before next usage.

10. After using the blender, always move the switch into the ‘0’ setting and remove the

mains plug from the power outlet.

11. To remove the jug just turn it in an anti-clockwise direction and then lift it up.

Pulse Function

The pulse function will give you a short burst at maximum speed, regardless of the current

speed of the blades. The button is spring-loaded. When you stop pressing, it will return to the

speed the switch is pointing at.

Crushing Ice

Before using the blender to crush ice, make sure it is clean and rinse it out thoroughly. Any

remaining trace of detergent may affect the taste of the crushed ice and will flatten any drink to

which it has been added.

Ice cubes come in many shapes and sizes. You will have to experiment with the ice from your

ice cube tray. Insert a maximum of 8 ice cubes and add 15ml (1 tablespoon) of fresh cold

water. Put the lid on the blender and turn the control knob to “P”. While the unit is blending, hold

for 2 seconds and release for 2 seconds. Note that too much blending will reduce the ice to

liquid, too little will merely chip the edges/corners off the ice. Do not try to crush ice without

adding water to the jug.

Do not be tempted simply to increase the amount of ice and blend for longer –this will not work.

Too much ice will never give you satisfactory results.

Adding Ingredients

If you need to add ingredients while the blender is working, lift the lid off, pour the new

ingredients then re-place the lid. Make sure that the added ingredients do not push the volume

in the jug past the MAX. mark.

Tips for Using Your Blender

•Do not blend dry, thick or heavy mixtures for more than 60 seconds continuously. Let the

appliance cool down before you continue operating the appliance again.

•Do not place the lid into boiling water as it may deform.

•To achieve the best results when pureeing solid ingredients, place small portions into the

jug one by one instead of placing a large quantity all at once.

•If you are processing solid ingredients, cut them into small pieces first (2-3cm).

•When mixing solid ingredients start off first with a small amount of liquid. Gradually add

more and more liquid.

•For stirring solid or very thick liquid ingredients we recommend that you use the blender

in pulse mode to prevent the blades from becoming stuck.

•Always place your hand on top of the blender when you are operating the device.

•Be careful when processing lukewarm liquids.

CLEANING AND MAINTENANCE

•This appliance is for household use only and is not user-serviceable.

•Do not open or change any parts by yourself. Please refer to an authorized electrical

service department or return to the supplier if servicing is necessary.

•Always remember to unplug the unit from the electrical outlet when not in use and

before cleaning.

•Do not use bleach or other abrasive substance or solvents to clean your appliance

as it can be damaging to the finish.

•Do not immerse the whole unit in water or any other liquid, or hold it under a running

tap to clean.

•Unplug the blender from the mains before cleaning and storing away.

•Clean soon after use, to prevent residues settling inside the jug.

•Remove the jug from the motor unit. Wash the jug, lid and measuring cup in warm

soapy water, rinse well, then turn the jug upside down to drain and dry.

•Keep hands out of the jug –BLADES ARE VERY SHARP.

•If it is left for too long without cleaning and bits have glued themselves to the inside

of the jug, use a nylon brush to remove. If this does not work –crush a few ice

cubes in it.

•Wipe the outside of the motor unit with a clean damp cloth.

•Do not put the motor unit in water or any other liquid.

Quick cleaning of the jug -

Empty the glass jug and fill it with water. Place the jug on the motor and turn the switch several

times to the ‘P’ setting. Empty the glass jug and rinse until clean.

Thorough cleaning of the dismantled jug -

Ensure that the jug is completely empty before you unscrew the blade assembly. Be careful

when handling the blade. All removable parts are suitable for the dishwasher. Note that the

dishwasher can affect the surface finishes. Do not use harsh or abrasive cleaning agents or -

solvents.

STORING THE APPLIANCE

•Unplug the unit from the wall outlet and clean all the parts as instructed above. Ensure

that all parts are dry before storing.

•Store the appliance in its box or in a clean, dry place.

•Never store the appliance while it is still wet or dirty.

•Never wrap the power cord around the appliance.

TROUBLE SHOOTING

Item

Problem

Solution

Product does not work

- Ensure that it is correctly assembled.

- Make sure the plug is connected to the

power source.

Product suddenly stopped running

- The jug or lid may have loosened during

vigorous processing. Please re-install

the jug or lid.

Product produces an odor during

operation

- The product may have been operating

for too long, please stop using the

product and let it cool down.

Please note: If none of the above can solve the problem, please stop using the product and

send it back to the service agent.

SERVICING THE APPLIANCE

There are no user serviceable parts in this appliance. If the unit is not operating correctly, please

check the following:

•You have followed the instructions correctly

•That the unit has been wired correctly and that the wall socket is switched on.

•That the mains power supply is ON.

•That the plug is firmly in the mains socket.

Inhaltsverzeichnis

Andere Russell Hobbs Mixer Handbücher

Russell Hobbs

Russell Hobbs 21350 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHSC043 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 24600-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHSC055 Installationsanleitung

Russell Hobbs

Russell Hobbs 25290-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 24720-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 24721-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs Desire 18508 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 25710-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHBL3000 Series Installationsanleitung

Russell Hobbs

Russell Hobbs RHB315 Installationsanleitung

Russell Hobbs

Russell Hobbs 25232-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 24722-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 25161-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 550931 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 24732-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 21480-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 24722 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 28241-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs DESIRE RHBL5BLK Installationsanleitung

Russell Hobbs

Russell Hobbs RHSB055 Installationsanleitung

Russell Hobbs

Russell Hobbs RHSB025 Installationsanleitung

Russell Hobbs

Russell Hobbs food 14452-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 25160-56 Bedienungsanleitung

Beliebte Mixer Handbücher anderer Marken

ROTOR

ROTOR 1125.201 Bedienungsanleitung

Braun

Braun Multiquick 5 Vario series Bedienungsanleitung

ARENDO

ARENDO MIRA 305424 Bedienungsanleitung

CHEF-BUILT

CHEF-BUILT CCB-3500 Bedienungsanleitung

Viconte

Viconte VC-4406 Bedienungsanleitung

Oster

Oster BLSTAB-CB0 Bedienungsanleitung

HOFFEN

HOFFEN MC-3005 Bedienungsanleitung

Black & Decker

Black & Decker BLC18750DM Bedienungsanleitung

Sunbeam

Sunbeam 4182 Bedienungsanleitung

Bialetti

Bialetti FMX35 Bedienungsanleitung

Black & Decker

Black & Decker BL8000 Bedienungsanleitung

Duronic

Duronic BL530 Bedienungsanleitung

Exquisit

Exquisit MS 3002 wes Bedienungsanleitung

Lumme

Lumme LU-KP1891A Bedienungsanleitung

Binatone

Binatone HB-735 Bedienungsanleitung

Moulinex

Moulinex LM936E10 Bedienungsanleitung

Oster

Oster VERSA Installations- und Betriebshandbuch

Ninja

Ninja NN210Q Bedienungsanleitung