Russell Hobbs RHCH16 Installationsanleitung

INSTRUCTIONS AND WARRANTY

MODEL NO. RHCH16

RUSSELL HOBBS

ULTRA MODERN INTELLI FAN HEATER

Congratulations on purchasing our Russell Hobbs Ultra Modern Intelli Fan Heater. Each

unit is manufactured to ensure safety and reliability. Before using this appliance for the

first time, please read the instruction manual carefully and keep it for future reference.

FEATURES OF THE RUSSELL HOBBS ULTRA MODERN INTELLI FAN

HEATER

IMPORTANT SAFEGUARDS

When using any electrical appliance, basic safety precautions should always be followed

including the following:

1. Please read the instructions carefully before using the ceramic heater.

2. Always ensure that the voltage on the rating label corresponds to the mains

voltage in your home.

3. Incorrect operation and improper use can damage the heater and cause injury to

the user.

4. The ceramic heater is intended for household use only. Commercial use invalids

the warranty and the supplier cannot be held responsible for injury or damage

caused when using the heater for any other purpose than that intended.

5. Avoid any contact with moving parts.

6. This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

7. Children should be supervised to ensure that they do not play with the appliance.

8. Check the power cord and plug regularly for any damage. If the cord or the plug

is damaged, it must be replaced by the manufacturer or a qualified person in

order to avoid an electrical hazard.

9. Do not use the ceramic heater if it has been dropped or damaged in any way. In

case of damage, take the unit in for examination and/or repair by an authorised

service agent

10. To reduce the risk of electric shock, do not immerse or expose the motor

assembly, plug or the power cord to water or any other liquid.

11. Never immerse the unit in water or any other liquid for cleaning purposes.

12. Remove the plug from the socket by gripping the plug. Do not pull on the cord to

disconnect the appliance from the mains. Always unplug the unit when not in

use, before cleaning or when adding or removing parts.

13. The use of accessory attachments that are not recommended or supplied by the

manufacturer may result in injuries, fire or electric shock.

14. A short cord is provided to reduce the hazards resulting from becoming

entangled in or tripping over a longer cord.

15. Do not let the cord hang over the edge of a table or counter. Ensure that the cord

is not in a position where it can be pulled on inadvertently.

16. Do not allow the cord to touch hot surfaces and do not place on or near a hot gas

or electric burner or in a heated oven.

17. Do not use the ceramic heater on a gas or electric cooking top or over or near an

open flame.

18. Use of an extension cord with the heater is not recommended. However, if it is

necessary to use an extension lead, ensure that the lead is suited to the power

consumption of the appliance to avoid overheating of the extension cord,

appliance or plug point. Do not place the extension cord in a position where it can

be pulled on by children or animals or tripped over.

19. This ceramic heater is not suitable for outdoor use. Do not use this appliance for

anything other than its intended use.

20. DO NOT carry the heater by the power cord.

21. Do not leave this heater unattended during use. Always unplug the unit when not

in use or before cleaning.

22. Always operate the heater on a smooth, even, stable surface. Do not place the

unit on a hot surface.

23. Ensure that the switch is in the “Off” position after each use.

24. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do

not use on soft surfaces, like a bed, carpets, where openings may become

blocked.

25. A heater has hot and arcing or sparking parts inside. Do not use it in areas where

gasoline, paint, or flammable liquids are used or stored.

26. Do not insert or allow foreign objects to enter any ventilation or exhaust opening

as this may cause an electric shock or fire, or damage the heater.

27. Do not cover with clothing or place alongside inflammable objects such as

cushions, newspapers or curtains, etc.

28. The sides are hot during operation, do not touch the heater while it is running.

29. The manufacturer does not accept responsibility for any damage or injury caused

by improper or incorrect use, or for repairs carried out by unauthorised

personnel.

30. In case of technical problems, switch off the machine and do not attempt to repair

it yourself. Return the heater to an authorised service facility for examination,

adjustment or repair. Always insist on the use of original spare parts. Failure to

comply with the above mentioned pre-cautions and instructions, could affect the

safe operation of this machine.

PARTS DIAGRAM

SWING

27¢XC

COMFORT

TIMER

2 1

ON/FAN/HEAT

HEAT

18¢XC24¢XC21¢XCFROST

WATCH

Main elements

1. Remote Control

2. Front Grille

3. Control Panel

4. Base

5. Tip over switch (under unit)

6. LED (for comfort setting)

7. Swing button

8. Timer button

9. Comfort button

10. On/Fan/Heat button

11. LED (for timer & heat)

12. Remote Receiver

OPERATING INSTRUCTIONS

This heater is intended for use on a flat, stable surface, such as a floor, tabletop,

shelf, or desk in a location where the airflow grille openings won’t be obstructed.

Keep all combustible material such as furniture, pillows, paper, clothes and curtains

at least 3 feet (0.9m) away from the heater. Do not use in wet or moist locations, like

bathrooms or laundry areas, or in areas where paint or other flammable or volatile

liquids are used or stored.

This heater can be performed in horizontal and vertical position. Rotate the body

from vertical to horizontal position in clockwise direction until the “click” is reached

and vice versa (horizontal to vertical by anticlockwise). DO NOT TURN IN WRONG

DIRECTION. IT WILL BREAK THE INTERNAL STRUCTURE.

CAUTION: Be sure no other appliances are plugged into the same circuit with this

heater/ fan. A circuit overload could occur.

Power

Be sure the heater is on a flat and stable surface before plug in. Plug in to an AC

outlet.

Press the On/Fan/Heat button once to start the heater in fan mode only in continuous

run. The ON light will light up and Heat LED will glow in green colour. No heating will

occur in this mode.

Press the button twice to change to a lower power in continuous run on 24C temp

setting. The ON light is still on and the heater’s LED changes to an orange colour.

Comfort 24C LED will also be lit up.

Press the button a third time to change to a higher power in continuous run on 24C

temp setting. The heater’s LED changes to a red colour.

Press the button again to turn the heater off. All lights are off.

Mode: Set Temperature

Press the Comfort button to set the desired temperature during the power state (the

power can be set from the above power setting instruction)

The comfort LED for the different temperature settings will light up in sequence

(Frost watch, 18C, 21C, 24C, 27°C ) when pressing the comfort button each time.

The heater will switch off shortly after the desired temperature is reached and the

power light will still on.

The heater will turn back on when the room temp drops below the desired

temperature.

The temp control can be disabled if all comfort temperatures is set to be off. The

heater will run continuously.

For the frost watch features:

After set to frost watch mode, the heater will remain off unless the temperature drops

below (40F/4C). If this happens, frost watch will automatically cycle the heater on.

Mode: Set Timer

Press the timer button to set the operation time.

The LED display show the set time from 1 to 10 hours. If you press the timer button

once it will set the time for an hour, press the button twice fro 2 hours, and press the

button 3 times for 3 hours and 4 times for 4 hours. If you want to set the timer for 5 or

up to 10 hours continue pressing the timer button until the ideal time is set. For

example if you want to set the timer for 5 hours, press the button once more after the

4 hour setting, number 4 and 1 will light up. This means timer is set for 5 hours (4

plus 1). If you want to set the timer for 8 hours press the timer button 8 times.

Number 4,1 and 3 will light up for time set for 8 hours.

The heater will turn off when the set time is passed. All settings will be cancelled and

the heater needs to start again by pressing the on button if desired.

The time can be disabled if all the LED display numbers is set to be off

Mode: Oscillation

The oscillation feature functions in any power or mode setting in a VERTICAL and

HORIZONTAL position.

Press the oscillation button to select on and off.

Mode: Remote Control

Two AG 13 or LR 44 buttons cells are required.

The remote control works the same as the corresponding buttons on the control

panel. The control display on the heater will show the appropriate icons when the

various functions are activated.

SAFETY FEATURES

This unit is equipped with a Safety Auto-Off, plus a safety Thermal Fuse. If the unit

experiences excessive heat, the Safety Auto-Off will shut the unit off. If this happens,

be sure the front and back grilles are not blocked and nothing is restricting airflow.

Unplug the unit, let it cool down, and wait 10 minutes before plugging it back in to

operate. If the unit fails to operate after 10 minutes, it may mean the heater has

internal damage and that the Thermal Fuse has been tripped so the heater can no

longer operate.

The Motion Off Detection Feature will cut the heater & fan power if the unit falls over

in any direction or is lift (such as if you move it to another part of the room). The Tip-

Over Switch will cut the power if the unit is knocked over forward or backward (for

example, if a pet accidentally tips it over). Do not attempt to defeat this safety

feature.

The power indicator shows that the heater is switched on and operating. It continues

to glow even if the thermostat has cycled and the heating elements are off. Note that

even though this unit has a Cool-Touch Housing, both the front and back grilles will

get hot. Be careful not to touch them.

When the sensor temp is over 48C, there will be abnormal display on LED. The

machine should be unplugged to cool down below 48C before operating again.

When the thermostat, fuse or tip over switch is activated, the machine is off but the

LED shows at normal.

CLEANING AND MAINTENANCE

This appliance is for household use only and is not user-serviceable.

Do not open or change any parts by yourself. Please refer to a qualified electrical

service department or return to the supplier if servicing is necessary.

Always remember to unplug the unit from the electrical outlet when not in use

and before cleaning. Ensure that the heater is switched off.

The body of the appliance and the stand should be cleaned with a damp cloth.

Do not let water enter the appliance or the stand.

Do not use bleach or other abrasive substance or solvents to clean your

appliance as it can be damaging to the finish.

Do not immerse the heater in water or any other liquid, or hold it under a running

tap to clean.

To remove stubborn spots/marks, wipe the surfaces with a cloth slightly

dampened in soapy water or mild non-abrasive cleaner.

STORING THE APPLIANCE

Unplug the unit from the wall outlet and clean all the parts as instructed above.

Ensure that all parts are dry before storing.

Store the appliance in its box or in a clean, dry place.

Never store the appliance while it is dirty.

Never wrap the power cord around the appliance.

SERVICING THE APPLIANCE

There are no user serviceable parts in this appliance. If the unit is not operating

correctly, please check the following:

You have followed the instructions correctly

That the unit has been wired correctly and that the wall socket is switched on.

That the mains power supply is ON.

That the plug is firmly in the mains socket.

If the appliance still does not work after checking the above:

- Consult the retailer for possible repair or replacement. If the retailer fails to resolve the

problem and you need to return the appliance, make sure that:

The unit is packed carefully back into its original packaging.

Proof of purchase is attached.

A reason is provided for why it is being returned.

If the supply cord is damaged, it must be replaced by the manufacturer or an authorised

service agent, in order to avoid any hazard. If service becomes necessary within the

warranty period, the appliance should be returned to an approved Tedelex Trading (Pty)

Ltd service centre. Servicing outside the warranty period is still available, but will,

however, be chargeable.

CHANGING THE PLUG

Should the need arise to change the fitted plug, follow the instructions below.

This unit is designed to operate on 230V-240V current only. Connecting to other

power sources may damage the appliance. Connect a three-pin plug as follows:

The wires in this mains lead are coloured in accordance with the following code:

Green/Yellow = Earth

Blue = Neutral

Brown = Live

Inhaltsverzeichnis

Andere Russell Hobbs Heizung Handbücher

Russell Hobbs

Russell Hobbs RHPH7001 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHFH1008B Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHRETFH1002WDB Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHPH2001 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHOFR5003 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHOFR3001 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHFH16 Installationsanleitung

Russell Hobbs

Russell Hobbs RHC1960 Installationsanleitung

Russell Hobbs

Russell Hobbs RH11C Installationsanleitung

Russell Hobbs

Russell Hobbs RHFH913 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHTHW Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHCVH4002 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHOFHL11 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHRETHFH1001G Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHRETPTC2001 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHOFR5001 (B) Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHCTH1 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHRETFH1002G Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHCVH4003 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHFH20 Installationsanleitung

Russell Hobbs

Russell Hobbs RH09C Installationsanleitung

Russell Hobbs

Russell Hobbs RHFH505 Installationsanleitung

Russell Hobbs

Russell Hobbs RH0H11 Bedienungsanleitung

Russell Hobbs

Russell Hobbs CH-01F Bedienungsanleitung

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung

iLO

iLO IHP2424 Betriebsanleitung