Connection Instructions
Read all instructions before starting the installation.
Determine the ideal location for the BTA-1 Inline Bluetooth
Local Source Module, keeping in mind that structural
elements, concrete, and other 2.4 gHz transmitters may
interfere with the signal. The BTA-1 Inline Bluetooth Local
Source Module may be located anywhere inline between
the A-BUS® hub/controller and A-BUS keypad. It will work
with other inline A-BUS local source modules noting that the
one closest to the keypad will have priority. The BTA-1 Inline
Bluetooth Local Source Module can be programmed with a
custom name using a supplied USB cable. If custom name has
not been programmed before installation, the BTA-1 should
be accessible to do so after installation.
Route a single CAT-5 cable from the A-BUS Audio
Distribution Hub to the BTA-1 Inline Bluetooth Local Source
Module location. Then route another single CAT-5 cable from
the BTA-1 to the A-BUS keypad or another A-BUS local source
module if used (i.e. A-LC3). Terminate the end of the CAT-5
cables connected to the BTA-1 with RJ-45 plugs using the
T568A standard wiring conguration. Once connected to the
A-BUS hub, the blue LED will light (solid) indicating the local
source module is powered and ready to be paired to your
Bluetooth enabled device.
Pass code and ID name
The default device ID name and password are “MA1227” and
“0000”, but you can modify this information using the supplied
USB cable and a computer running Windows® XP, Vista or 7.
Free programming software can be downloaded from the
Support Center at www.russound.com, along with instructions
to rename the BTA-1 for easy identication (ie. bedroom,
kitchen, outdoors, etc.).
Pairing your BTA-1
Turn on a Bluetooth enabled source (i.e. media player,
smartphone, or computer). Open the Bluetooth menu and
enable the Bluetooth pairing feature on the device. Select
the A-BUS Bluetooth product by its congured name from the
list of available Bluetooth products. Once paired, the blue LED
will blink once every three seconds to show there is an active
connection to the Bluetooth source.
Select the desired audio from the device and start the
playback. The blue LED will return to a solid blue state when
the connection is lost due to range limitation or disconnected
manually.
Testing
Turn on the A-BUS keypad then connect to the BTA-1 with
the Bluetooth enabled source device. Start music playback
and use the Bluetooth source to change the audio content.
Disable Bluetooth on the source device then re-enable it.
Reconnect to the BTA-1 and recheck all functions.
Normal Use
Only one device at a time may be actively paired with the
BTA-1. Activate the Bluetooth feature from the source device
and connect or ‘pair’ with the BTA-1 selecting its assigned
name. Choose your music and start playing. The BTA-1 will
automatically override any audio signal that precedes it in the
system. Note that any additional local source modules in line
between the BTA-1 and the A-BUS keypad will override the
BTA-1 audio. When nished, disconnect your device from the
BTA-1 or turn o the Bluetooth feature of the source device.
If you move your device out of range from the module it
will automatically sever the connection. If you are unable to
connect to the receiver, another device within range of the
receiver is probably connected.
Troubleshooting
My music is not coming out of the stereo speakers
Solutions
Ensure the A-BUS Amplied keypad is turned on and volume
is set at a suitable level and not muted.
Ensure the volume on your Bluetooth enabled source i.e.
media player, smartphone, or computer is set to a suitable
level.
Ensure the RJ-45 input and output cables are correctly and
rmly connected to the BTA-1.
Ensure your Bluetooth enabled source i.e. media player,
smartphone, or computer is within the 50 ft. (15m) range of
the BTA-1 module.
Ensure the BTA-1 module is powered and the blue LED is
solid (device not connected to a Bluetooth enabled device).
Ensure the BTA-1 module is powered and the blue LED is
ashing once every three seconds (indicating your device is
connected via Bluetooth technology).
Connection Diagram
/
/
/
/
Copyright ©2012 Russound® All rights reserved. All trademarks are
the property of their respective owners. Russound is not responsible
for typographical errors or omissions. Specications are subject to
change without notice.
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Russond
is under license. Other trademarks and trade names are those of their
respective owners.
Limited Warranty
The Russound BTA-1 is fully guaranteed for two (2) years from the
date of purchase against all defects in materials and workmanship.
During this period Russound will replace any defective parts and
correct any defect in workmanship without charge for either parts or
labor. For this warranty to apply, the unit must be installed and used
according to its written instructions. If service is necessary, it must
be performed by Russound. Russound assumes no responsibility for
defects resulting from abuse or servicing performed by an agency or
person not specically authorized in writing by Russound. Damage to
or destruction of components due to improper use voids the warranty.
In these cases the repair will be made at the owner’s expense.
Accidental damage and shipping damage are not considered defects
under the terms of the warranty. To return for repairs, the unit must
be shipped to Russound at the owner’s expense, along with a Return
Authorization number and documentation explaining the nature
of the service required. Any product returned without prior written
permission will be returned to sender. Russound sells products only
through authorized Dealers and Distributors to ensure that customers
obtain proper support and service. Any Russound product purchased
from an unauthorized dealer or other source, including retailers,
mail order sellers and online sellers will not be honored or serviced
under existing Russound warranty policy. Any sale of products by an
unauthorized source or other manner not authorized by Russound
shall void the warranty on the applicable product.
Hub
CommonIR
12VDC
Trig ger Ou t
100mA
Outputs to Keypads
1234
5678
Page
In Page
Trim
Mute In
Source Audio Connections
123456
R
L
Out
In
IR
R
L
Out
In
IR
R
L
Out
In
IR
R
L
Out
In
IR
R
L
Out
In
IR
R
L
Out
In
IR
Control Link
In Out
Src Trim Src Trim Src Trim Src Trim Src Trim Src Trim
A-C68 (or any A-BUS hub)
CAT-5
A-BUS Amplied Keypad
BTA-1
CAT-5
CAT-5 Cable 150’Max Length (Total)
A-BUS is a registered trademark of LeisureTech Electronics Pty
Ltd Australia. This product may be covered by one or more of the
following patents: US #7,181,023, #6,389,139; EP #1004222, AU
#739808, NZ #502982, Mexico #241196, Canada #CA2301062.
