Russound CAM6.6 Bedienungsanleitung
CAM6.6
Six-Zone, Six-Source Controller
CAM6.6T
Six-Zone, Six-Source AM/FM Receiver
INSTRUCTION MANUAL
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER - SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and mainte-
nance (servicing) instructions in the literature accompanying the
appliance.
POWER CORD NOTICE FOR INTERNATIONAL OPERATION
For 230V, 50Hz operation please select the power cord for your
area. Select the plug for your area at one end and a IEC320 con-
nector at the other. It is not necessary to make any other
changes. If you have any questions please call Russound Inc. at
1-800-638-8055 or 603-659-5170
Safety Instructions:
1. Read Instructions - All the safety and operating instructions should be
read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions should be
retained for future reference.
3. Heed Warnings - All warnings on the appliance in the operating instruc-
tions should be adhered to.
4. Follow Instructions - All operating and user
instructions should be followed.
5. Water and Moisture - The appliance should
not be used near water; for example, near a
bathtub, washbowl, kitchen sink, laundry
tub, in a wet basement, or near a swimming
pool.
6. Carts and Stands - The appliance should be used only with a cart or
stand that is recommended by the manufacturer. An appliance and cart
combination should be moved with care. Quick stops, excessive force
and uneven surfaces may cause the appliance and cart combination to
overturn.
7. Wall or ceiling Mounting - The appliance should be mounted to a wall
or ceiling only as recommended by the manufacturer.
8. Ventilation - The appliance should be situated so that its location or
position does not interfere with its proper ventilation. For example, the
appliance should not be situated on a bed, sofa, rug, or similar surface
that may block the ventilation openings, or placed in a built-in installa-
tion, such as a bookcase or cabinet that may impede the flow of air
through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources such
as radiators, heat registers, stoves, or other appliances (including
amplifiers) that produce heat.
10.Power Sources - The appliance should be connected to a power supply
only of the type described in the operating instructions or as marked on
the appliance.
11.Grounding or Polarization - Precaution should be taken so that the
grounding or polarization means of an appliance is not defeated.
12.Power Cord Protection - Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, receptacles,
and the point where they exit from the appliance.
13.Cleaning - The appliance should be cleaned only as recommended by
the manufacturer.
14.Non-use Periods - The power cord of the appliance should be
unplugged from the outlet when left unused for a long period of time.
15.Object and Liquid Entry - Care should be taken so that objects do not
fall and liquids are not spilled into the enclosure through the openings.
16.Damage Requiring Service - The appliance should be serviced by quali-
fied service personnel when:
A.The power supply cord or the plug has been damaged; or
B.Objects have fallen, liquid has been spilled into the appliance; or
C.The appliance has been exposed to rain; or
D.The appliance does not appear to operate normally; or
E.The appliance has been dropped or the enclosure is damaged.
17.Servicing - The user should not attempt to service the appliance beyond
that described in the operating instructions. All other servicing should
be referred to qualified service personnel.
Precautions:
1. Power – WARNING: BEFORE TURNING ON THE POWER FOR THE
FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.
All models are designed for use with either AC120V, 60Hz or AC240,
50Hz voltages. The unit will autoswitch to either of these voltages
2. Do Not Touch The Unit With Wet Hands – Do not handle the CAM6.6 or
power cord when your hands are wet or damp. If water or any other liq-
uid enters the CAM6.6 cabinet, take the CAM6.6 to a qualified service
person for inspection.
3. Location of CAM6.6 – Place the CAM6.6 in a well - ventilated location.
Take special care to provide plenty of ventilation on all sides of the
CAM6.6 especially when it is placed in an audio rack. If ventilation is
blocked, the CAM6.6 may overheat and malfunction. Do not expose the
CAM6.6 to direct sun light or heating units as the CAM6.6 internal com-
ponents temperature may rise and shorten the life of the components.
Avoid damp and dusty places.
4. Care – From time to time you should wipe off the front and side panels
of the cabinet with a soft cloth. Do not use rough material, thinners,
alcohol or other chemical solvents or cloths since this may damage the
finish or remove the panel lettering.
IMPORTANT SAFEGUARDS
2
TABLE OF CONTENTS
3
USER SECTION
Product Introduction ............................................................................................................................5
Component Guide
CAM6.6 Controller..............................................................................................................................6
UNO-S1 Keypad..................................................................................................................................7
UNO-S2 Keypad .................................................................................................................................8
UNO-TS2 Touchscreen ........................................................................................................................9
SRC2 Remote Control.......................................................................................................................10
Operation
UNO-S1 Keypad Button Function........................................................................................................11
UNO-S1 User Menu...........................................................................................................................12
UNO-S2 Keypad Button Function........................................................................................................13
UNO-S2 User Menu...........................................................................................................................14
UNO-TS2 Touchscreen Button Function...............................................................................................15
UNO-TS2 - Setting Preferences..........................................................................................................16
Internal Source - AM/FM Tuner
UNO-S1 Keypad Control....................................................................................................................17
UNO-S2 Keypad Control ..............................................................................................................18-19
UNO-TS2 Touchscreen Control......................................................................................................20-21
SRC2 Remote Control .................................................................................................................22-23
INSTALLER SECTION
Getting Started
Unpacking........................................................................................................................................25
Tools Needed...................................................................................................................................25
System Installation Considerations.....................................................................................................25
Connection Tips................................................................................................................................25
Component Guide
CAM6.6 Controller Rear Panel.......................................................................................................26-27
UNO Keypad OS Update Port ............................................................................................................28
UNO Keypad Rear Panel....................................................................................................................29
Wiring Instructions
Keypad Wiring ..................................................................................................................................30
Speaker Wiring.................................................................................................................................30
UNO-S2 IR Receiver Connection.........................................................................................................31
Keypad Installation
UNO Keypad Location ......................................................................................................................32
UNO Keypad Installation....................................................................................................................32
Making Connections
UNO Keypad Port Connections ..........................................................................................................33
Source Audio Input Connections.........................................................................................................34
Source IR Input Connections..............................................................................................................34
Common IR Input Connection.............................................................................................................35
TABLE OF CONTENTS
Speaker Connections........................................................................................................................36
Zone Fixed/Variable Audio Output ......................................................................................................37
12VDC Home Theater Trigger In/Out..................................................................................................38
12VDC Mute Trigger In/Out ...............................................................................................................39
RNET Link In/Out..............................................................................................................................40
RS-232 Interface ..............................................................................................................................41
AM/FM Tuner Antennas.................................................................................................................42-44
Initial Install Test ...............................................................................................................................45
Programming
System Programming Overview.....................................................................................................46-47
Installation Menu
Installation Menu Overview.............................................................................................................48
Peripheral Setup......................................................................................................................49-51
Source Setup ..........................................................................................................................51-57
Basic Setup...........................................................................................................................51-53
Zone Setup ..................................................................................................................................58
Controller Setup.......................................................................................................................58-59
Power Management .................................................................................................................59-61
Learn IR.......................................................................................................................................61
Macro Editor............................................................................................................................62-63
System Info..................................................................................................................................63
Setup Menu Flow Charts...........................................................................................................64-76
Peripheral Setup: Memory Name, Bank Name..............................................................................64
Peripheral Setup: Controller ID, Region, Factory Init, System Info..................................................65
Basic Setup...............................................................................................................................66
Key Configuration ......................................................................................................................67
Source Names/Volume Trim.......................................................................................................68
Numeric IR................................................................................................................................69
Source Select Command/Number of Sources..............................................................................70
Zone Setup ...............................................................................................................................71
Controller Setup.........................................................................................................................72
Power Management ...................................................................................................................73
Learn IR....................................................................................................................................74
Macro Editor .............................................................................................................................75
System Info...............................................................................................................................76
Keypad Diagnostics Menu .............................................................................................................77
REFERENCE SECTION
IR Device Code List..........................................................................................................................78-81
IR Keycode List..............................................................................................................................82-103
Source Names.............................................................................................................................104-105
Source Information Form.....................................................................................................................106
Zone Information Form........................................................................................................................107
Macro Editor Form..............................................................................................................................108
Sample Configurations..................................................................................................................109-112
Technical Specifications.......................................................................................................................113
Warranty ............................................................................................................................................114
4
5
PRODUCT INTRODUCTION
Thank you for choosing the Russound®CAM6.6 multisource, multizone controller to enhance your
home with distributed audio. This controller’s state-of-the-art features and components blend seam-
lessly with your unique lifestyle and preferences.
Besides distributing and controlling six audio sources to six rooms (zones) using RNET®keypads,
your CAM6.6 offers many features that increase your enjoyment of living. Here are several that you
may find particularly beneficial.
Favorites
These easy-to-set buttons make it possible to hear your favorite radio station or watch your favorite
satellite channel at just the right volume in your room with just a button push. The F1 and F2 preset
favorite buttons can be found on the SRC2 remote control, UNO-S2 keypad and UNO-TS2 touch-
screen. Want something new? Just re-save the Favorite with a new choice.
Party Mode
Ready to set the mood? In Party Mode, you just pick the source and the sound settings and hear the
music throughout all the rooms. The Master keypad simultaneously controls all the keypads in all the
rooms to effortlessly select or control the components. A great benefit of the Party Mode feature is
the ability to transfer the Master keypad mode to any keypad in the system. If the living room is the
center of the party, use that room’s keypad as Master. If the party moves to the sunroom and porch,
that room’s keypad can be set to Master instead.
Do Not Disturb
The Do Not Disturb setting prevents unwanted interruptions in your room and stops changes to your
selected audio source. You may have a nursery or study that you want to keep quiet, or maybe you
are watching a DVD and don’t want it interrupted. Simply set the Do Not Disturb mode to “on”
through the keypad’s User Menu, and be free from Party Mode interaction and system-wide functions
like “All On” or “All Off.”
Internal Source
The CAM6.6T includes an internal source - an AM/FM tuner module. The tuner can store up to 36
favorites, or memory presets. These are stored in six groups (or banks) of six presets. Each preset
and each bank can be given a custom name of your choice.
Here at Russound we are proud to continue providing innovative and intuitive audio product solutions
to the world. When you link the industry-leading CAM6.6 with Russound’s commitment to its products
and customers, you have truly made – “the right connection.”
6
USER
COMPONENT GUIDE
CAM6.6 Controller-Front Panel
MAIN POWER SWITCH - Supplies power to the CAM6.6
ROOM LED ON/OFF INDICATORS - Indicates when a room is on (green) or off (red)
1
2
2
1
Main Power and Zone Status
The power switch for the CAM6.6 controller is “on” in the up position. Any active
room (1-6) is indicated on the front of the controller by a green LED, which shows
red when the room is inactive. In most basic installations, all functions and room set-
tings are controlled through the corresponding UNO systems keypads.
7
USER
COMPONENT GUIDE
UNO-S1 Keypad
LCD PANEL - 5-character backlit display shows status of the room, source,
volume, and more
SOURCE SELECT BUTTON - Scrolls through the sources directly connected to the
CAM6.6. Press and hold brings up the USER MENU for loudness, bass, treble, etc.
VOLUME UP/DOWN BUTTONS - Raises and lowers the volume for the room
IR RECEIVER - Receives IR signals and passes them to the controller and source equip-
ment. Also used when operating the UNO Keypad by using the SRC2 remote
POWER BUTTON - Turns room ON or OFF when pressed once, press and hold a sec-
ond time will turn on or off all CAM6.6 rooms
COMMAND KEYS - Pressing the command keys controls the source equipment
1
4
2
5
3
6
102.5
1
2
3
4
5
6
(press) (press and hold)
(press) (press and hold)
8
CD PLAYER 1
LCD PANEL - 12-character backlit display shows status of the room, source,
volume, and more
SOURCE SELECT BUTTON - Scrolls through the sources directly connected to the
CAM6.6. Press and hold brings up the USER MENU for loudness, bass, treble, etc.
VOLUME UP/DOWN BUTTONS - Raises and lowers the volume for the room
IR RECEIVER - Receives IR signals and passes them to the controller and source equip-
ment. Also used when operating the UNO Keypad by using the SRC2 remote
COMMAND KEYS - Pressing the command keys controls the source equipment
POWER BUTTON - Turns room ON or OFF when pressed once, press and hold a sec-
ond time will turn on or off all CAM6.6 rooms
F1 AND F2 BUTTONS - Selects Favorite 1 or Favorite 2 - preset user-selected
favorite settings per room
1
4
7
2
5
3
6
3
2
4
6
7
1
5
USER
COMPONENT GUIDE
UNO-S2 Keypad
Command Keys
9
USER
COMPONENT GUIDE
UNO-TS2 Touchscreen
IR RECEIVER - Receives IR signals and passes them to the controller and source equip-
ment. Also used when operating the touchscreen by using the SRC2 remote
TOUCHSCREEN - Full color resistive touchscreen with multi-sound feedback. Screen
can be programmed to go blank after a period of inactivity. Touching the screen any-
where reactivates it.
PLUS - Adjust setting for selected source
MINUS - Adjust setting for selected source
NEXT - Go to next selection for selected source
PREVIOUS - Go to previous selection for selected source
POWER - Turn room power on/off. Press and hold for system all on/all off
PAUSE - Pause/mute for selected source
VOLUME DOWN - Adjust volume down for room controlled by touchscreen
VOLUME UP - Adjust volume up for room controlled by touchscreen
5
4
3
2
1
6
7
8
9
10
5
4
3
2
1
6
7
8
9
10
10
USER
COMPONENT GUIDE
SRC2 Remote Control
1
4
4
7
7
2
5
8
3
3
6
9
11
10
6
9
1
2
5
8
10
11 POWER - Turns room or Local Source on and
off.
RUSSOUND DEVICE BUTTON - Used for
SRC2 control of zone keypad.
NUMBER BUTTONS - Buttons (0-9) for direct
selection of channels or discs.
VOLUME UP/DOWN - Raises and lowers the
volume for the room you are in, or for the
selected Local Device.
CURSOR KEYS - Issues IR commands for
source equipment, allowing movement
through menus and program screens.
COMMAND KEYS - Controls the selected
device (e.g., VCR, DVD, or CD player) with
these buttons.
SOURCE - Directly select sources connected to
the Russound controller while in the Russound
mode.
F1 AND F2 BUTTONS - Selects and saves
Favorite 1 or Favorite 2 preset selections.
INPUT - Scrolls through sources while in the
Russound mode, or switches inputs on
selected Local Source.
LOCAL DEVICE BUTTONS - Selects Local
Source to be controlled by SRC2.
SETUP - Use for programming SRC2 using
the built-in library or by learning-in codes.
Andere Handbücher für CAM6.6
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Russound Stereo-Receiver Handbücher
Beliebte Stereo-Receiver Handbücher anderer Marken
Pioneer
Pioneer SX-1000TA Bedienungsanleitung
Yamaha
Yamaha MusicCast TSR-5B3D Bedienungsanleitung
Sony
Sony STR-DE335 - Fm Stereo/fm-am Receiver Bedienungsanleitung
Sony
Sony STR-DG500 - Multi Channel Av Receiver Bedienungsanleitung
Panasonic
Panasonic AJSD955B - DVCPRO50 STUDIO DECK Bedienungsanleitung
Pioneer
Pioneer SX-838 Bedienungsanleitung