Rutland ESB57 Bedienungsanleitung
Energiser Installation Guide
Thank you for purchasing a Rutland battery powered electric fence
energiser. We believe this unit is the best of its kind for ease of use, reliability
and durability. This guide provides instruction to properly install, operate
and maintain your unit, ensuring the most effective performance.
For Battery Powered Energisers
ESB57, ESB202
ESB275, ESB325, ESB375
ESB145, ESB225
E S B 2 2 5
- 2 -
Installation of Energiser and Fence
Electric fences should be installed and operated so that they cause no
danger to persons, animals or surroundings and as far as is reasonably
practicable, they are out of reach of children and not subject to mechanical
damage. Never connect more than one energiser to the same single or
multi-wire fence. Any other fence systems powered by a different energiser
should be at least 2.5 metres apart. If this gap is to be closed, use non-
conductive material or an isolated metal barrier. Any electric fence or part
thereof installed along a public road or pathway should be identified by
warning signs at regular intervals. The warning sign should
have a yellow background and be at least 100 mm x 200 mm.
The words “Caution Electric Fence” or symbol should appear in
black, permanent marking on both sides of the sign and be at
least 25mm in height.
• Barbed wire must not be electried.
• If an electric fence has to be installed in the vicinity of overhead power
lines it should not cross above it or run in parallel to it for any great
distance. If it is necessary to pass under overhead powerlines it should be
done at right angles and the vertical distance between any fence wire and
the surface of the earth should not exceed two metres.
• If an electric fence has to be installed near any communication lines, the
distance from the lines and the fence or any part of it should be more than
two metres.
• If the energiser is installed in the vicinity of any building, care must be
taken to ensure that the earth for the electric fence is more than 10 metres
away from any domestic electricity board earth or telecommunications
system earth.
• Follow the manufacturer’s directions for proper earthing of your electric
fence.
• Use insulated cable for connecting leads that run inside buildings or
underground. Take care to avoid damage from animal hooves or vehicle
tyres and use a conduit of insulating material if needed.
• Do not install connecting leads in the same conduit as the mains supply
wiring, communication cables or data cables.
• Low output energisers provide satisfactory and safe performance for
deterring birds, household pets and training animals such as cows.
• If the electric fence is intended to deter birds from roosting on buildings,
do not connect the fence wire to the earth terminal. Use a warning sign at
any point where a person may access the fence wire.
Before You Start
- 3 -
How Electric Fencing Works
Manufacture Standard
Built to Comply with CE, IPX4, EN60355-2-76
Health & Safety Standards EN55014, EMC
Safety
• Keep combustible materials away from the connection to the fence
energiser.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person in order to
avoid a hazard.
Warning: Avoid touching electric fence wires, especially with the head,
neck or torso. Do not climb over, through or under multi-wire electric
fence. Use a gate or a specially designed crossing point. Incorporate a
non-electrified gate or crossing stile where an electric fence crosses a
public pathway. At any such crossing the adjacent electric fence should
carry warning signs.
Tools Required
• Adjustable spanner
Other Required Components
• Earth stake(s) (part no. 18-179B; includes line clamp)
- 4 -
Energiser Installation
STEP 1: Mount Energiser
IMPORTANT: Energisers must be kept off ground, except ESB145 and ESB225
Model Mounting Options
ESB57
ESB202
ESB275
ESB325
ESB375
ESB145
ESB225
These models feature weatherproof casing,
so they can be placed on the ground
Use mounting stand
part no. SP72-010
Use mounting stand
part no. SP57-004 Wood post
mounting
Wood post
mounting
- 5 -
STEP 2: Connect EARTH and FENCE Terminals
Place ring end of crocodile
clip over terminal. Connect
GREEN/YELLOW wire to EARTH
terminal; connect RED wire to
FENCE terminal.
Model Connect EARTH Connect FENCE
ESB57
ESB202
ESB275
ESB325
ESB375
ESB145
ESB225
- 6 -
STEP 3: Connect Earth System
NOTE: Connect additional earth stakes
with lead-out cable if required
Connect green crocodile clip to
earth stake (part no. 18-179B)
Ensure Earth System is Sound
STEP 4: Connect Fence Lead to Fence Line
Ensure Fence System is Sound
• Ensure all connection points such as joiners and insulators are sound
and secure
• IMPROPER CONNECTION POINTS WILL AFFECT YOUR ENERGISER
PERFORMANCE
Connect red crocodile
clip to fence line
- 7 -
12v Leisure
Battery
part no. 22-107
RED
crocodile
clip
BLACK
crocodile
clip
STEP 5: Connect to Battery (Models ESB57, ESB202,
ESB275, ESB325, and ESB375)
NOTE: Make sure
power switch is in
OFF (0) position
(for models:
ESB275, ESB325
and ESB375).
- 8 -
STEP 5: Connect to Battery (Model ESB225)
12v Leisure
Battery
pn: 22-107
4
6
5
12
3
NOTE: Make sure
power switch is in
OFF (0) position.
- 9 -
STEP 5: Connect to Battery (Model ESB145)
6
12v Leisure
Battery
pn: 22-107
4(a) 12v Leisure Battery
Red Black
– or –
13
4(b) (2x) 9v Dry Battery
Red Red
Black Black
9v Dry
Battery
pn: 22-101
9v Dry
Battery
pn: 22-101
NOTE: Make sure
power switch is in
OFF (0) position.
5
2
- 10 -
PULSE
EARTH FENCE
1 / 0
POWER
ESB57
BATTERY ENERGISER
BATTERY
LOW
Earth terminal (green)
• connect to earth stake
Fence terminal (red)
• connect to fence line
On(1)/off(0) switch
Pulse indicator
• ashes to indicate
voltage output
Battery low indicator
• ashes if battery needs
recharging
Energiser Operation
For Model: ESB57
Model Approximate Battery Life
ESB57 144 days
Dieses Handbuch passt für folgende Modelle
6
Inhaltsverzeichnis
