Saeco INCANTO Series Bedienungsanleitung
Test program
“INCANTO” model
Incanto base
Incanto
®
Rapid steam
Incanto with SBS
®
Rapid steam
Incanto Digital
®
Rapid steam
2
Test program INCANTO………………………………………………………………………….
3
Test program INCANTO rapid steam…………………………………………………………
5
Test program INCANTO Digital…………………………………………………………………
7
Test program INCANTO with SBS……………………………………………………………..
9
Index
3
Test program INCANTO
In test program it is very easy to locate the broken parts, and the time to adjust it becomes lesser.
To enter in test program the machine has to be turned off, and the hot water steam knob closed
.
For entering in Test program push the following key’s
Push the key’s 3 and 4 and turn on the
machine by the main switch.
Rotation anticlockwise of the gear motor
Key 1
Check the right rotation anticlockwise of the gear motor
and that the brewing unit is going upwards correctly.
Check also that the gear motor isn’t noisy
When the gear motor is in work position, the key N°1 will be urned
on.
Rotation clockwise of the gear motor.
Key 2
Check the right rotation clockwise of the gear motor
and that the brewing unit is going downwards correctly.
Check also that the gear motor isn’t noisy.
When the gear motor is in home position, the key N° 2 will be turned
on
Function coffee
grinder
Key 3
Check that the coffee grinder is rotating clockwise.
When the doser is full, the led of the key number 3 will be turned
on.
Check the noise of the coffee grinder
4
Opening of the doser
Key 4
Check the right function of the doser.
Check that the doser isn’t noisy.
When the doser is activated the led of the key number 3 will be
turned off.
Absorbing resistance coffee boiler
Key’s 1 + 5
Check through the ampere meter if coffee boiler is absorbing
.
Function of the pump
Key 4 + water knob open
Check the right function of the pump.
Check the noise of the pump
.
Functions of the led
Key’s 1+5 water knob open
Check the functions and the lightness of all the led.
Reed sensor for water level.
The water tank has to be empty.
Start taking it off very slowly.
The led D6:
First it has to be turned off
then it has to be turned on
then it has to be turned off again.
Opening the service door.
Open the service door and check that the key number 5 is turned on.
Drip tray.
Take off the drip tray and check that it’s turned on the led number
7 and the key number 5
Brewing unit
Take off the brewing unit and check that the key number 4 is turned
on
5
Test program INCANTO rapid steam
In test program it is very easy to locate the broken parts, and the time to adjust it becomes lesser.
To enter in test program the machine has to be turned off, and the hot water steam knob closed
.
For entering in Test program push the following key’s.
Push the key’s 3 and 4 and turn on the
machine by the main switch.
Rotation anticlockwise of the gear motor
Key 1
Check the right rotation anticlockwise of the gear motor
and that the brewing unit is going upwards correctly.
Check also that the gear motor isn’t noisy.
When the gear motor is in work position, the key N° 1 will be the
turned on
Rotation clockwise of the gear motor.
Key 2
Check the right rotation clockwise of the gear motor
and that the brewing unit is going downwards correctly.
Check also that the gear motor isn’t noisy.
When the gear motor is in home position, the key N° 2 will be turned
ON.
Function coffee
grinder
Key 3
Check that the coffee grinder is rotating clockwise.
When the doser is full, the led of the key number 3 will be turned
on. Check the
noise of the coffee grinder.
Opening of the doser
Key 4
Check the right function of the doser.
6
Absorbing resistance coffee boiler .
Key’s 1 + 5
Check through the ampere meter if the coffee boiler is absorbing.
Absorbing resistance coffee boiler
Key’s 2 + 5
Check through the ampere meter if the steam boiler is absorbing.
Function of the pump
Key 4 + water knob open
Check the right function of the pump.
Check the noise of the pump
Functions of the led.
Key’s 1+5 water knob open
Check the functions and the lightness of all the led.
Reed sensor for water level
The water tank has to be empty.
Start taking it off very slowly.
The led D6:
First it has to be turned off
then it has to be turned on
then it has to be turned off again
Opening the service door
Open the service door and check that the key number 5 is turned on
.
Drip tray
Take off the drip tray and check that it’s turned on the led number
7 and the key number 5.
Brewing unit
Take off the brewing unit and check that the key number 4 is turned
on.
7
Test program INCANTO Digital
In test program it is very easy to locate the broken parts, and the time to adjust it becomes lesser.
To enter in test program the machine has to be turned off, and the hot water steam knob closed.
For entering in Test program push the following key’s
Push the key’s 3 and 5 and turn on the
machine by the main switch.
The display is indicating the version of the software.
Let go of the key’s. Now the machine is in test program.
Rotation anticlockwise of the gear motor
Key 1
Check the right rotation anticlockwise of the gear motor
and that the brewing unit is going upwards correctly.
Check also that the gear motor isn’t noisy.
When the gear motor is in work position.
on the display it will appear number 1.
Rotation clockwise of the gear motor.
Key 2
Check the right rotation clockwise of the gear motor
and that the brewing unit is going downwards correctly.
Check also that the gear motor isn’t noisy.
When the gear motor is in home position.
on the display it will appear number 2.
Function coffee
grinder
Key 3
Check that the coffee grinder is rotating clockwise.
When the doser is full.
on the display it will appear number 3
Check the noise of the coffee grinder
Opening of the doser
Key 4
Check right function of the doser.
Check that the doser isn’t noisy.
Activating the doser pushing the key number 4, the number 3 has to
be switched off.
Absorbing resistance coffee boiler
Key’s 2 + D6
Check through the ampere meter, if the coffee boiler is absorbing
8
Absorbing resistance steam boiler
Key’s 3 + D6
Check through the ampere meter, if the steam boiler is absorbing
Function of the pump
Key’s 1 +D7 + water knob open
Check the right function of the pump.
Check the noise of the pump.
Boiler temperature
Key’s 4 + D6 + D7
With this function it is possible to check
the present temperature of the boiler.
Reed sensor for water level
The water tank has to be empty.
Start taking it off very slowly.
The number 7 on the display:
has to be turned off
then it has to be turned on
then it has to be turned off again.
Opening the service door
Open the service door and check that the key number 9 is turned off.
Drip tray
Take off the drip tray and check that the numbers 5 and 9 on the
display is turned off
Brewing unit
Take off the brewing unit and check that the key number 6 is turned
off
9
Test program INCANTO with SBS
In test program it is very easy to locate the broken parts, and the time to adjust it becomes lesser.
To enter in test program the machine has to be turned off, and the hot water steam knob closed.
For entering in Test program push the following key’s.
Push the key’s 3 and 5 and turn on the
machine by the main switch.
The display is indicating the version of the software.
Let go of the key’s.
Rotation anticlockwise of the gear motor
Key 1
Check the right rotation anticlockwise of the gear motor
and that the brewing unit is going upwards correctly.
Check also that the gear motor isn’t noisy.
When the gear motor is in work position.
on the display it will appear number 1.
Rotation clockwise of the gear motor.
Key 2
Check the right rotation clockwise of the gear motor
and that the brewing unit is going downwards correctly.
Check also that the gear motor isn’t noisy.
When the gear motor is in home position.
on the display it will appear number 2
.
Function coffee
grinder
Key 3
Check that the coffee grinder is rotating clockwise.
When the doser is full,
on the display it will appear number 3
Check the noise of the coffee grinder.
Opening of the doser
Key 4
Check the right function of the doser.
Check that the doser isn’t noisy.
Activating the doser pushing the key number 4, the number 3 has to
be switched off.
10
Absorbing resistance coffee boiler
Key’s 2 + D6
Check through the ampere meter, if the boiler is absorbing
Absorbing resistance steam boiler
Key’s 3 + D6
Check through the ampere meter, if the steam boiler is absorbing.
Function of the pump
Key’s 1 +D7 +water knob open
Check the right function of the pump.
Check the noise of the pump
Boiler temperature
Key’s 4 + D6 + D7
With this function it is possible to check
the present temperature of the boiler
Reed sensor for water level
The water tank has to be empty.
Start taking it off very slowly.
The number 7 on the display:
has to be turned off
then it has to be turned on
then it has to be turned off again.
Opening the service door
Open the service door and check that the key number 9 is turned off.
Drip tray
Take off the drip tray and check that the numbers 5 and 9 on the
display is turned off
Brewing unit
Take off the brewing unit and check that the key number 6 is turned
off.
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Andere Saeco Kaffeemaschine Handbücher
Saeco
Saeco Intelia Bedienungsanleitung
Saeco
Saeco Incanto HD8911 Bedienungsanleitung
Saeco
Saeco Minuto Bedienungsanleitung
Saeco
Saeco Intelia Deluxe HD8759/47 Bedienungsanleitung
Saeco
Saeco 10002928 Betriebsanleitung
Saeco
Saeco Grand Baristo Bedienungsanleitung
Saeco
Saeco RI8329/09 Bedienungsanleitung
Saeco
Saeco RI9837/05 Bedienungsanleitung
Saeco
Saeco Cafissimo HD8603 Bedienungsanleitung
Saeco
Saeco GranAroma SM6582 Bedienungsanleitung
Saeco
Saeco RI8329 Bedienungsanleitung
Saeco
Saeco suP-032Br Bedienungsanleitung
Saeco
Saeco Moltio HD8766 Bedienungsanleitung
Saeco
Saeco Saeco ROYAL PROFESSIONALS ESPRESSO MACHINE Betriebsanleitung
Saeco
Saeco RI9752/43 Betriebsanleitung
Saeco
Saeco Incanto Rondo Bedienungsanleitung
Saeco
Saeco RI9376/01 Bedienungsanleitung
Saeco
Saeco 741464329 Bedienungsanleitung
Saeco
Saeco SM8782/30 Bedienungsanleitung
Saeco
Saeco Gran Baristo HD8965 Bedienungsanleitung
