PROGRAMMING THE MACHINE PROGRAMMING THE MACHINE
91 92
By means of keys move the asterisk to
item “VENDING” and select it through the
ENT key. From the displayed submenu it is
possible to select one of the following items by
meansofthesamekeys .Onthecontrary,
if the hot water selection key is pressed, the
submenu can be quit.
The following messages will be displayed:
"CODE "
" ****"
"1 LARGE COFFEE "
"TOTAL 1234.... "
"1 COFFEE "
"TOTAL 1234.... "
"1 SMALL COFFEE "
"TOTAL 1234.... "
"HOT WATER "
"TOTAL 1234.... "
"COUNTER "
"LOCKING:1234.... "
"COUNTER "
"CYCLES 0 "
Code programming
A code protects the access to the machine
counters; enter it for each programming section
and before carrying out any modification. As
soon as the code is entered, modifications can
be carried out without entering it again as long
as the programming function is enabled.
The machine is not supplied with a code. Keep
to the following indications for code
programming:
By means of keys move the asterisk to
item“VENDING”andselectitthroughtheENT
key. The following message will be displayed:
"CODE "
" ****"
The following message will be displayed:
"CHANGE CODE "
" 0... "
By means of keys enter the number to be set on
the first character and confirm the selection
through the ENT key. The entered number is
saved and the cursor moves automatically to the
following character.
After having entered the complete new code, it
is necessary to save it.
The following message will be displayed:
"NEW CODE? "
"SAVE NO "
Bymeans ofkeys the code canbe saved
or not saved: SI or NO.
Code entering
To enter the code, press keys and move
the asterisk to the counter to be changed; select
it through the ENT button.
The following message will be displayed:
"CODE?? "
Enter the number to be set on the first character by
meansofkeys and confirmtheselection with
ENT. The entered number is then saved and the
cursormovesautomaticallytothefollowingcharacter.
Ifa wrong code has beenentered, the following
message will be displayed for about two se-
conds:
"CODE FAULTY "
After having entered three wrong codes, the
entering procedure is not allowed any longer.
Counter modification
Large coffee counter
"1 LARGE COFFEE "
"TOTAL "
The counter shows the large coffee amount
dispensed from the last reset.
FromtheVENDINGmenu, movethe asteriskto the
LARGE COFFEEmenuby meansof keys ;
confirm the selection with buttonENT.
By means of the same keys it is possible
tomodify theselected value(to resetthe counter,
for example). Use theENT button to save a new
value.PresstheESCbuttontostopthenewvalue
entering procedure and, as a result, the former
counter setting shall be considered.
Coffee counter
"1 COFFEE "
"TOTAL "
The counter shows the regular coffee amount
dispensed from the last reset.
FromtheVENDINGmenu, movethe asterisk to
the COFFEE menu by means of keys ;
confirm the selection throughENT.
Bymeans of thesame keys , itis possible
tomodify theselected value(to resetthe counter,
for example). Press ENT to save a new value.
Onthe contrary, by pressingESC the new value
entering is stopped and, as a result, the former
counter setting shall be considered.
Small coffee counter
"1 SMALL COFFEE "
"TOTAL "
The counter shows the small coffee amount
dispensed from the last reset.
FromtheVENDINGmenu, movethe asterisk to
the SMALL COFFEE menu by means of
keys ;confirmtheselectionthroughENT.
Bymeans of thesame keys , itis possible
tomodify theselected value(to resetthe counter,
for example). Press ENT to save a new value.
Onthe contrary, by pressingESC the new value
entering is stopped and, as a result, the former
counter setting shall be considered.
Hot water dispensing counter
"HOT WATER "
The counter shows the hot water amount (in ml)
dispensed from the last reset.
FromtheVENDINGmenu, movethe asterisk to
the HOT WATER menu by means of
keys ;confirmtheselectionthroughENT.
Bymeans of thesame keys , itis possible
tomodify theselected value(to resetthe counter,
for example). Press ENT to save a new value.
Onthe contrary, by pressingESC the new value
entering is stopped and, as a result, the former
counter setting shall be considered.
Counter
"COUNTER "
After a certain number of cycles, this function
allows to stop the coffee dispensing (excluding
hot water, steam and cappuccino dispensing
operations). It can also be used, for example, to
program the machine servicing.
If the 0value is set, the function is disabled.
FromtheVENDINGmenu, movethe asterisk to
the COUNTER menu by means of
keys and confirm the selection through
ENT.
Pressthe samekeys to modify the selected value
(forexampletosetanewservicinglimit).Through
