T2130
9724
CONTENTS
1 GENERAL INFORMATION
1.1 INTRODUCTION 1-1
1.2 GENERAL DESCRIPTION 1-1
1.3 TECHNICAL DATA 1-2
1.4 PRINCIPLE OF OPERATION AND BLOCK DIAGRAM 1-4
2 INSTALLATION MECHANICAL HF SSB TRANSMITTER T2130
2.1 MOUNTING POSSIBILITIES/DIMENSIONS AND DRILLING PLAN 2-1
2.1.1 INSTALLATION HINTS 2-4
2.2.2 BATTERY REQUIREMENTS FOR GMDSS 2-5
2.2.3 AERIAL AND RF GROUNDING REQUIREMENTS 2-7
2.2.4 MAIN CABLE PLANE WHEN SUPPLIED FROM 24V BATTERY. 2-11
2.2.5 MAIN CABLE PLANE WHEN SUPPLIED FROM 12V DC BATTERY,
USING N2160 12V DC TO 24 V DC CONVERTER. 2-12
2.2.6 MAIN CABLE PLAN WHEN SUPPLIED FROM AC,
USING N2161 AC TO 24V DC POWER SUPPLY.
MAIN CABLE PLAN WHEN SUPPLIED BOTH FROM AC
AND DC (N2161). 2-13
2.2.7 INSTALLATION WITH REMOTE CONTROL C2140 2-14
2.2.8 INSTALLATION WITH DSC (TELEX) RM2150 2-16
2.2.10 CONNECTIONS TO T2130 2-17
2.2.11 CONNECTIONS TO RE2100 2-18
2.2.12 CONNECTIONS TO AT2110 2-19
2.2.13 CONNECTIONS TO N2161 2-20
2.2.14 CONNECTIONS TO BATTERY CHARGER N2174 2-21
2.3 SYSTEM DESCRIPTION AND TROUBLE SHOOTING 2-23
2.3.3 SYSTEM FUNCTIONAL DESCRIPTION 2-24
3 SERVICE
3.1 MAINTENANCE 3-1
3.2 ALIGNMENT INSTRUCTIONS 3-1
3.3 PROPOSAL FOR NECESSARY MEASURING INSTRUMENTS 3-1
3.4 TROUBLE SHOOTING 3-2
3.4.1 POWER AMPLIFIER (MODULE 1) 3-5
3.4.2 OUTPUT FILTER (MODULE 2) 3-6
3.4.3 TX-PROCESSOR (MODULE 3) 3-7
3.4.4 POWER SUPPLY (MODULE 4) 3-8
3.4.5 NOT USED 3-10
3.4.6 CONNECTION BOARD (MODULE 6) 3-10
3.4.7 REPLACEMENT OF COMPONENTS 3-10
3.4.8 REPLACEMENT OF MODULES 3-10
3.5 PERFORMANCE CHECK 3-11
3.5.1 POWER AMPLIFIER (MODULE 1) 3-12
3.5.2 OUTPUT FILTER (MODULE 2) 3-13
3.5.3 TX-PROCESSOR (MODULE 3) 3-14
3.5.4 POWER SUPPLY (MODULE 4) 3-19
3.5.5 NOT USED 3-20
3.5.6 CONNECTION BOARD (MODULE 6) 3-20
3.6 ADJUSTMENT PROCEDURE 3-21
3.6.1 POWER AMPLIFIER (MODULE 1) 3-21
