Sailor RM2042 Bedienungsanleitung
S.P. RADIO A/S
AALBORG
DENMARK
TECHNICAL MANUAL
FOR
COMPACT VHF DSC RM2042
RM2042
9401
Service modeUser mode
INSTALLATION INFORMATION RM2042
ThisVHFDSCRM2042isdelieveredwiththeserviceswitchinpositionServiceMode.Afterprogramming
ofMMSInumbertheserviceswitchmustturnedintopositionUserMode.Pleaserefertothedrawingbelow.
RM2042
9716
CONTENTS
1 INTRODUCTION
1.1 GENERAL DESCRIPTION 1-2
1.2 TECHNICAL DATA 1-3
1.3 CONTROLS 1-4
1.4 PRINCIPLE OF OPERATION AND BLOCK DIAGRAM 1-6
2 INSTALLATION
2.1 MOUNTING POSSIBILITIES 2-1
2.2 POWER SUPPLY 2-5
2.3 HANDSET 2-5
2.4 ANTENNA 2-5
2.5 ELECTRICAL CONNECTIONS 2-6
3 SERVICE
3.1 MAINTENANCE 3-1
3.2 ALIGNMENT INSTRUCTIONS 3-1
3.3 PROPOSAL FOR NECESSARY TEST EQUIPMENT 3-2
3.4 TROUBLE SHOOTING 3-3
3.5 PERFORMANCE CHECK 3-3
3.6 ADJUSTMENT PROCEDURE 3-6
3.7 REPLACEMENT OF COMPONENTS 3-9
3.8 REPLACEMENT OF MODULES 3-9
3.9 NECESSARY ADJUSTMENTS AND CHECK AFTER REPAIR 3-10
3.10 PIN CONFIGURATIONS 3-12
4 MECHANICAL DESCRIPTION
4.1 MECHANICAL DISASSEMBLING AND UNITS LOCATION 4-1
5 CIRCUIT DESCRIPTION AND SCHEMATIC DIAGRAMS
5.1 INTERFACE (MODULE 1) PART NO. 626941 5-1
5.2 MICROPROCESSOR (MODULE 2) PART NO. 626942 5-7
5.3 RECEIVER (MODULE 3) PART NO. 626943 5-13
5.4 DISPLAY UNIT (MODULE 4) PART NO. 626944 5-23
5.6 KEYBOARD UNIT (MODULE 6) PART NO. 625636 5-27
6 MICROTELEPHONE INSTALLATION
6.1 SPECIAL INSTALLATION WITH 2 MICROTELEPHONES 6-3
6.2 SPECIAL INSTALLATION WITH 3 MICROTELEPHONES: 6-4
6.3 MECHANICAL DIMENSIONS FOR HANDSET 6-5
7 PARTS LIST
RM2042
CONTENTS
1 INTRODUCTION
1.1 GENERAL DESCRIPTION 1-2
1.2 TECHNICAL DATA 1-3
1.3 CONTROLS 1-4
1.4 PRINCIPLE OF OPERATION AND BLOCK DIAGRAM 1-6
9716
1 INTRODUCTION
The RM2042 VHF receiver modem, has been developed to fullfil the international requirements stated
by IMO, in the Global Maritime Distress and Safety System,known as GMDSS.
TheRM2042isthefirstself-containedreceiver-modemonthemarket,whichincludesaseparatereceiver
with continous watch on calling ch. 70, and a fullfeatured CLASS A modem for reception and generation
of all types of calls.
Combined with a VHF in the compact 2000 program, a complete fully automatic VHF-communication
system can be build. Furthermore the units can be combined with other compact 2000 units to form a
complete GMDSS installation.
TheRM2042combinestheIMOrequirements onsafety,withalotof userconvenientfeaturestobeused
in normal VHF-communication. And of course a high security scrambler can be combined with the
system.
This advanced communication controller uses a lot of front end technologies, including a complete new
range of components as well as the well known mechatronic design. Resulting in a high quality product,
able to withstand the harsh environmental conditions present at sea.
In spite of all the precautions taken in the design of this unit, a regular service and maintenance is
recommended, to increase unit life-time and user safety.
S.P.RadioistheEuropeanleadingmanufacturerofmaritimeradiocommunicationequipment-aposition
whichhasbeenmaintainedbymeansofconstantandextensiveproductdevelopment. Wehaveaworld-
wide network of dealers with general agencies in fifty countries. All our dealers are well-trained, and will
be able to make service on all products.
PAGE 1-1
RM2042
1 INTRODUCTION RM2042
1.1 GENERAL DESCRIPTION
RM2042 is a complete VHF receiver-modem, for digital selective calling on the VHF-channels.
RM2042 maintains a continous watch of the calling channel 70, by means of the build-in receiver.
RM2042 decodes and encodes all the messages applicable for a VHF Class A DSC-equipment, as
prescribed by international authorities.
RM2042 is intended for use, both as a part of the safety system on board, as well as a convenient
automatic calling device ship/ship, ship/shore and when implemented from land telephone
subscriber to ship.
RM2042 can be connected to the C2149 GMDSS alarm unit, for remote control of distress calls.
RM2042 has an output for an external alarm unit, indicating reception of distress calls.
RM2042 has an NMEA0183-input, for direct connection to on-board navigational equipment, giving
automatic position update in DSC calls.
RM2042 can be connected to a standard line printer for print out of received messages and other
valueable informations.
RM2042 includes as a standard, an electronic memory message bank for different kinds of calls.
RM2042 includesa userprogramable quick-callregister, notonly fornumbers, butfor completeuser
composed DSC-calls.
RM2042 includes a real-time clock with battery back-up.
RM2042 uses a fully alpha-numeric LCD-display, for read-out of all kinds of messages in plain
language.
RM2042 supplies the user with a menu-guided programming interface, making it an easy task to
compose all kinds of calls.
RM2042 can be used for channel selection on your new Compact 2000 VHF transceiver.
RM2042 is housed in a corrosion resistant metal cabinet with a green nylon finish.
RM2042 canofcoursebeusedinamanualset-up,asaDSC-encoder,providingtheconnectedVHF-
unit with key information etc.
PAGE 1-2
Andere Handbücher für RM2042
1
Inhaltsverzeichnis
Andere Sailor Sprecher Handbücher
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung