Saitek PS30 Bedienungsanleitung

Cyborg evo Wireless User Manual

Getting Started

Features:

Battery

Your Cyborg evo Wireless uses one AA alkaline battery (supplied) which should give up

to 50 hours of use. To fit the battery, open the battery compartment on the bottom of

your joystick by sliding back the cover. Insert the AA battery in the direction shown and

replace the cover.

LED power status

The Saitek Cyborg evo Wireless features an LED (Light Emitting Diode) on the top of the

stick which shows how much power is left in the battery. A green light means there is

between 20-80% of power remaining; amber means there is between 10-20% power

remaining; and red means there is less than 10% power and you will soon have to

replace the battery.

Plugging in the wireless receiver

Unclip the wireless receiver (or dongle) from the bottom of the evo Wireless joystick and

plug into one of your computer’s USB ports.

Sleep mode

Your Cyborg evo Wireless features a sleep mode to conserve battery life. After ten

minutes of no activity, the stick will power down and the head LED will switch off. Press

any of the buttons to wake the stick.

Scan Button

In certain circumstances, there may be interference to the signal between your stick and

the wireless receiver dongle in your computer caused by other wireless devices nearby.

To switch to an interference-free wireless channel, press the scan button on the

underside of your stick once.

Radio frequency

The Cyborg evo Wireless operates at a frequency of 2.402 – 2.480 GHz

Installing joystick driver software

Important note: Calibrating your joystick

The Saitek Cyborg evo Wireless stick uses a dynamic auto-calibration system, which is

designed to give you more accurate control. To maximise the effectiveness of

calibration, ensure that the stick is moved fully forwards, backwards and to both sides

after booting up your PC and before loading up your game.

Installation for users of Windows® XP

a) Drivers only for typical users

The software on the CD supplied with this product has been thoroughly tested and

complies with all Microsoft standards. However, we recommend that prior to installing

any 3rd party software you create a restore point to return to should you encounter any

difficulties.

Windows®XP users can do this by clicking on Start followed by Programs, then

Accessories, System Tools and finally on System Restore. In the window that

appears select Create a restore point and then click on Next. You will be prompted to

supply a name for this set-up.

Should you then encounter any difficulties during the installation process you can follow

the same path to restore your PC to its pre-installed state.

1 With your computer switched on, close down any programs that are currently running

and insert the Saitek Smart Technology CD into your CD-ROM drive.

2 When the Introduction Screen appears, click Install Software to continue.

3 When the Welcome screen appears, click Next to continue. (If the CD does not run

automatically, select Start from the Windows® Taskbar, then Run and type

D:\Setup.exe and click OK - where D:\ is letter of your CD-ROM drive).

4 After reading the Disclaimer, select the I accept the terms of the Disclaimer option

and click Next to continue.

5 At the Driver Setup screen, plug in your wireless receiver dongle and click on Next.

6 At the Driver Setup screen, click Next to test your controller.

7 When the Saitek Controller screen appears, try out all your controller’s buttons and

controls to show that it is working properly. When you have finished, click OK.

8 At the Software Setup screen, select Do not install the SST Programming

Software and click Next. The Programming Software can be installed at a later date

by following instruction (b) below

9 At the Registration screen, select Check this box to register now and follow the

on-screen instructions, or you can choose to select this option later.

10 Click on Finish to complete the installation.

b) Drivers and programming software for advanced users

1 Follow points 1 – 7 of the install procedure in A), then at the Software Setup screen,

select Install the SST Programming Software and click Next.

2 In the following Software Setup screen, click Next and follow the on-screen

instructions. At this point you will be asked to install such features as the Saitek

Magic Mouse, HID-compliant mouse, Saitek Magic Keyboard and HID Keyboard

Device (these are what XP calls the various elements of your Saitek controller).

Continue to click on Next and Finish to accept the installation until the Registration

screen appears.

3 At the Registration screen, select Check this box to register now and follow the

on-screen instructions, or do not select this option and register later.

4 Upon completion of the installation, you have the option to Run Profile Editor, which

will give you a view of the 3D programming environment. If you do not wish to see

the Profile Editor at this point, just uncheck the box and click on Finish to complete

the installation.

Installation for Users of Windows® 2000

a) Drivers only for typical users

1 With your computer switched on, close down any programs that are currently running

and insert the Saitek Smart Technology CD into your CD-ROM drive.

2 When the Introduction Screen appears, click Install Software to continue.

3 When the Welcome screen appears, click Next to continue. (If the CD does not run

automatically, select Start from the Windows® Taskbar, then Run and type

D:\Setup.exe and click OK - where D:\ is letter of your CD-ROM drive).

4 After reading the Disclaimer, select the I accept the terms of the Disclaimer option

and click Next to continue.

5 At the Device Driver Installation screen, click on Next and follow the on-screen

instructions.

6 When prompted, plug your controller’s USB connector into your computer, then click

on Configure.

7 When the Controller Properties screen appears, click Next to view the Test screen.

8 Now try out all your controller’s buttons and controls to show that it is working

properly. When you have finished, click OK.

9 At the Programming Software screen, select Typical User and click Next.

10 At the Registration screen, select Register and follow the on-screen instructions or

select Register Later and click Next.

11 Click on Finish to complete the installation.

b) Drivers and programming software for advanced users

1 Follow points 1 – 7 of the install procedure in A), then at the Programming Software

screen, select Advanced User and click Next.

2 At the Programmable Controller Drivers screen, click Update and follow the on-

screen instructions.

3 Then at the Installation of programming software successful screen, click Next.

4 At the Registration screen, select Register and follow the on-screen instructions or

select Register Later and click Next.

5 Upon completion of the installation, you have the option to Run Profile Editor, which

will give you a view of the 3D programming environment. If you do not wish to see

the Profile Editor at this point, just uncheck the box and click on Finish to complete

the installation.

Installation for Users of Windows® 98 and Me

a) Drivers only for typical users

1 With your computer switched on, close down any programs that are currently running

and insert the Saitek Smart Technology CD into your CD-ROM drive.

2 When the Introduction Screen appears, click Install Software to continue.

3 When the Welcome screen appears, click Next to continue. (If the CD does not run

automatically, select Start from the Windows® Taskbar, then Run and type

D:\Setup.exe and click OK).

4 After reading and accepting the Disclaimer, click Next to continue.

Note: For your controller to work, you must have a minimum of Microsoft® DirectX®

8.1 installed on your computer. The installer will automatically recognize if this

software needs to be added, and will allow you to install it directly from the Saitek

Product Companion CD, if necessary.

If you are asked to install Microsoft® DirectX® 8.1, click Install and follow the on-

screen instructions, and then restart your computer when prompted. Make sure that

you leave the Saitek CD in the drive when restarting. After this software has been

installed, you will automatically be taken to the installation to continue with the next

step.

5 Follow the on-screen instructions and select Yes, I want to restart my computer

now when prompted.

6 After the restart, at the Device Driver Installation screen, click on Next and follow the

on-screen instructions.

7 When prompted, plug your USB connector into your computer.

8 When the Controller Properties screen appears, click Next to view the Test Screen.

9. Now try out all your controller buttons and controls to show that it is working properly.

When you have finished, click OK.

10. At the Programming Software screen, select Typical User and click Next.

11. At the Registration screen, select Register my Saitek controller online, click Next

and follow the on-screen instructions or select Register Later and click Next.

12. Click on Finish to complete the installation.

b) Drivers and programming software for advanced users

1. Follow points 1 – 8 of the install procedure in A), then at the Programming Software

screen, select Advanced User and click Next.

2. At the Programmable Controller Drivers screen, click Update and follow the on-

screen instructions. At this point you will be asked to insert your Windows® CD,

however, DO NOT do this, just click on OK. At the next screen, type

C:\windows\system into the prompt and click OK and follow the on-screen

instructions.

3. At the Installation of programming software successful screen, click Next.

4. At the Registration screen, select Register my Saitek controller online, click Next

and follow the on-screen instructions or select Register Later and click Next.

5. Upon completion of the installation, you have the option to Run Profile Editor, which

will give you a view of the 3D programming environment. If you do not wish to see

the Profile Editor at this point, just uncheck the box and click on Finish to complete

the installation.

Note: Driver updates

From time to time there may be updates to the driver and programming software for this

product.

You can check for the latest software updates by visiting the Saitek website and clicking

on Downloads. A drop down menu will appear - Select Drivers and Software.

For Windows® XP users; Dynamic updates

You can check for Driver updates using Windows update. Click on Start on the bottom

left hand corner of your monitor and then select Windows Update from the menu. Click

on Driver Updates then select from any of the update options that appear in the centre

of the window. When you have selected the relevant file to download go to the left hand

side of the window and select Review and Install Updates. Finally click on Install Now

from the centre section.

Testing your joystick

• You can do test your stick at any time by Clicking on Start, then Settings and

selecting Control Panel in Windows (XP users may only need to click on Start and

then Control Panel)

• Look for an icon called either Game Controllers or Gaming Options (XP users may

have to click Printers and Other Hardware first).

• Open the Game Controllers/Gaming Options window then the name of your

controller should show up.

• Click on Properties and this will bring up the test screen.

• Moving your controller and pressing the buttons should result in a response in this

screen; if it's responding in there then you know that the controller is okay.

Enabling your controller in game

Most games support game controllers, which you can enable by using a [control] options

menu within the Main Menu of the game itself.

If you are having trouble working out how to do this or if you're unsure whether the game

being used supports game controllers, please refer to the user manual for that game for

more help.

Note: Even if the game you are using does not support game controllers, it is possible to

make the controller work in that game using the Saitek Smart Technology programming

software (only installed if you chose to be an Advanced User when installing). Using the

programming software allows you to program your controller with keyboard and mouse

commands, enabling it to work in those games that only have support for keyboards and

mice. For help using this powerful programming software, consult the Programming Your

Saitek Controller with Saitek Smart Technology Programming Software section in this

manual.

Troubleshooting

Q: I haven’t used my Cyborg evo Wireless joystick for some time, there are no LEDs

illuminated and the joystick doesn’t work.

A: Replace the battery on the underside of the joystick.

Q: My computer is not recognizing my Saitek joystick – what’s wrong?

A: 1. Have you installed the drivers on the CD supplied with this product?

2. Check the connections. Unplug the wireless receiver dongle controller and plug it

back in, making certain that it is securely attached.

3. Have you tested your controller? Please refer to the "How to Test Your Controller"

section in this manual for further information

Q: The game I am playing does not recognize my controller - what's wrong?

A: 1. Ensure that you have conducted the checks in Q1 [above]

2. Does the game you are playing offer support for game controllers? Please refer to

the "Enabling Your Controller in Game" section in this manual for further information.

Q: Some of the movements make on my wireless joystick are not being picked up in the

game I’m playing.

A: There is interference on the wireless channel your stick is using to communicate with

the receiver. Press the scan button on the underside of your stick once to switch to

an interference-free channel.

Programming your Saitek controller with Saitek Smart

Technology Programming Software

Introducing Saitek Smart Technology Programming Software

Saitek Smart Technology Programming Software (SST) is the software Saitek supplies

to configure your Saitek controller for enhanced functionality. SST delivers a powerful

set of features, allowing you to program your device with the ultimate configuration for

total interaction. Despite a level of sophistication previously unseen in the market, and

because of the Saitek Smart Technology inside, the software remains simple and

intuitive to use.

For a complete guide on how to program your Saitek controller, visit the Saitek website

at www.saitek.com.

Features of Smart Technology Programming Software:

• Quick and easy setup in any game

• Personalize the controller settings for your favorite games

• Configure your controller with an on-screen 3D model and interface

• Multiple setup option for each controller - ideal if a controller is used by several

people

• Program special moves with sophisticated timing features

• Special game setups available as ‘Profiles’ from the Saitek website and on the Smart

Technology CD

• Download the latest version of Saitek Smart Technology software from the Saitek

website

What is a Profile?

A Profile is a custom setup for improved gameplay – consisting of a set of commands

that are pre-assigned to the buttons or axes of your controller. There are over two

hundred pre-written Profiles available on the Product Companion Disk that accompanies

this device or on the Saitek Website – www.saitek.com. (Please check the website for

new or improved Profiles, which are being added regularly).

How do I program my controller?

After getting to know your controller, you can start creating your own personal Profiles

with the Saitek Smart Technology programming software (SST). This software has

virtually unlimited programming capabilities and allows you to customize the controller to

your exact gaming needs.

The Profile Editor allows you to program the buttons on your controller to perform

different actions within your games – this is especially useful if the game you are using

does not have its own screen that allows reconfiguring of your buttons.

Getting Started

1 Double-click on the Saitek Smart Technology icon the install left on your desktop.

2 In the Profile Editor, choose the control to which you wish to assign a keyboard

command. You do this by left-clicking on the control’s cell in the control list on the

right of the screen.

3 With the cursor flashing, type in the key commands and then click on the green tick

mark when complete.

4 Repeat this procedure for all the buttons you would like to program and then click

File, Save at the top of the Profile Editor window.

5 Give the profile a name (it is recommended you name it after the game for which the

profile is intended) and then click Save.

6 To enable the profile either click the Profile Now icon at the top of the Profile Editor

(it looks like a black and yellow crosshair) or right-click on the controller icon in your

taskbar and select the name of the profile from the pop-up list of options.

7 You will notice that when a profile is loaded that the controller icon in your taskbar

has a green square behind it, indicating that a profile is currently loaded. If you wish

to unload a profile simply right-click on the controller icon and click Clear Profile

from the pop-up list of options.

Technical Support

Can’t get started – don’t worry, we’re here to help you!

Nearly all the products that are returned to us as faulty are not faulty at all - they have

just not been installed properly.

If you experience any difficulty with this product, please first visit our website

www.saitek.com. The technical support area will provide you with all the information you

need to get the most out of your product and should solve any problems you might have.

If you do not have access to the internet, or if the website cannot answer your question,

please contact your local Saitek Technical Support Team. We aim to offer quick,

comprehensive and thorough technical support to all our users so, before you call,

please make sure you have all the relevant information at hand.

To find your local Saitek Technical Support Center, please see the separate Technical

Support Center sheet that came packaged with this product.

Conditions of Warranty

1 Warranty period is 2 years from date of purchase with proof of purchase submitted.

2 Operating instructions must be followed.

3 Product must not have been damaged as a result of defacement, misuse, abuse,

neglect, accident, destruction or alteration of the serial number, improper electrical

voltages or currents, repair, alteration or maintenance by any person or party other

than our own service facility or an authorized service center, use or installation of

non-Saitek replacement parts in the product or the modification of this product in any

way, or the incorporation of this product into any other products, or damage to the

product caused by accident, fire, floods, lightning, or acts of God, or any use violative

of instructions furnished by Saitek plc.

4 Obligations of Saitek shall be limited to repair or replacement with the same or

similar unit, at our option. To obtain repairs under this warranty, present the product

and proof of purchase (eg, bill or invoice) to the authorized Saitek Technical Support

Center (listed on the separate sheet packaged with this product) transportation

charges prepaid. Any requirements that conflict with any state or Federal laws, rules

and/or obligations shall not be enforceable in that particular territory and Saitek will

adhere to those laws, rules, and/or obligations.

5 When returning the product for repair, please pack it very carefully, preferably using

the original packaging materials. Please also include an explanatory note.

6 IMPORTANT: To save yourself unnecessary cost and inconvenience, please check

carefully that you have read and followed the instructions in this manual.

7 This warranty is in Lieu of all other expressed warranties, obligations or liabilities.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT

NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO

THE DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not

allow limitations on how long an implied warranty lasts, so the above limitations may

not apply to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL OR

CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER

WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER Some states do not allow

the exclusion or limitation of special, incidental or consequential damages, so the

above limitation may not apply to you. This warranty gives you specific legal rights,

and you may also have other rights which vary from state to state.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Saitek Videospiel-Controller Handbücher

Saitek

Saitek R100 Bedienungsanleitung

Saitek

Saitek Pro Flight Yoke System Bedienungsanleitung

Saitek

Saitek 4-in-1 Vibration Wheel Bedienungsanleitung

Saitek

Saitek GM2 Bedienungsanleitung

Saitek

Saitek X52 Bedienungsanleitung

Saitek

Saitek P2900 Bedienungsanleitung

Saitek

Saitek R440 Bedienungsanleitung

Saitek

Saitek Pro Flight Instrument Panel Bedienungsanleitung

Saitek

Saitek ST220 Bedienungsanleitung

Saitek

Saitek P990 Bedienungsanleitung

Saitek

Saitek PX4000 Bedienungsanleitung

Saitek

Saitek Pacific AV8R Bedienungsanleitung

Saitek

Saitek P3000 Bedienungsanleitung

Saitek

Saitek PC Flight Stick Bedienungsanleitung

Saitek

Saitek P2500 Bedienungsanleitung

Saitek

Saitek Pasific AV8R Bedienungsanleitung

Saitek

Saitek ST100 Bedienungsanleitung

Saitek

Saitek Cyborg evo Wireless Bedienungsanleitung

Saitek

Saitek PS33 Bedienungsanleitung

Saitek

Saitek Cyborg 3D Bedienungsanleitung

Saitek

Saitek P750 Bedienungsanleitung

Saitek

Saitek Pro Flight Instrument Panel Bedienungsanleitung

Saitek

Saitek P2000 Bedienungsanleitung

Saitek

Saitek P220 Bedienungsanleitung

Beliebte Videospiel-Controller Handbücher anderer Marken

Wasp

Wasp SL-6610 Bedienungsanleitung

JKG

JKG JKG2022A Bedienungsanleitung

Marvo

Marvo MG08 Bedienungsanleitung

Belkin

Belkin F8GBPC001 Bedienungsanleitung

GameSir

GameSir Z2 Bedienungsanleitung

Laser

Laser PCO-AGAMEC-BK Bedienungsanleitung

Cortex

Cortex VEXnet Bedienungsanleitung

Gioteck

Gioteck HF-1 Bedienungsanleitung

Nacon

Nacon DAIJA ARCADE STICK Bedienungsanleitung

Thrustmaster

Thrustmaster dual trigger Bedienungsanleitung

SHAKS

SHAKS S1+ Bedienungsanleitung

YCCTEAM

YCCTEAM Joy Con Bedienungsanleitung

Hyperkin

Hyperkin Smartboy Bedienungsanleitung

Nerf

Nerf DuraGrip Bedienungsanleitung

MoveMaster

MoveMaster MoveMaster Bedienungsanleitung

WinWing

WinWing Super Libra J1 Bedienungsanleitung

ECCI

ECCI Trackstar 6000 Series Bedienungsanleitung

Logitech

Logitech 963291-0403 - Attack 3 Joystick Bedienungsanleitung