Sakar 76379 Bedienungsanleitung
Users Manual
76379 Owner’s Manual
© 2002 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective.
1
Introduction
Thank you for your purchase of our digital camera. This unit
can be used as a web cam (camera to use to chat over the
Internet), or it can also be used as a low-resolution digital
camera. This camera is equipped with an 8MB built-in
SDRAM, therefore you are able to use it to take up to 117
low-resolution photos under QVGA mode. Although the
clarity may not be flawless, the Digital Camera quality is the
best for its value.
Please note that in order to speak with friends and
colleagues over the Internet, you will need a PC headset
and microphone. Any standard PC headset will operate with
this digital camera and is available at your local computer
retailer.
Package Contents:
●Digital Camera ●Users Manual
●Software CD ●USB Connector Cable
To Know Digital Camera
A. Viewfinder
B. Indicator light
C. Flashing Selection Button
D. Start/Shutter Button
E. Hanging Strap Hole
F. LCD
G. Delete Button
H. Function Button
I. Battery Box
J. Flash Lamp
K. Lens
L. USB Port
2
Replacing the Batteries
When the batteries power is low, press the shutter
button and you will hear a beeping sound. If you want to
replace the batteries, you must use two AA batteries.
Please be sure to download all photos, which are stored
inside of the camera, as they will be lost when the batteries
are removed.
1. Open the battery compartment.
2. Load the batteries correctly (please check that the
batteries are placed inside with the proper polarity).
3. Close the battery box cover.
zIf you do not use this camera for a long period, please
remove take out of the batteries to avoid the
discharging or corrosion of the batteries.
zPlease don’t put batteries into a fire to avoid explosion,
subsequent injury to you or others around you.
Do not mix old and new batteries. Do not mix alkaline, standard
(carbon zinc), or rechargeable (nickel cadmium) batteries.
Auto Energy-Save Mode
In order to conserve battery power, if the camera is not
used within 60 seconds after powering on, the camera will
automatically enter into energy saving mode. This will
prolong the life of the batteries. To wake up the camera
from the energy saving mode, simply press the Shutter
button.
3
IMPORTANT NOTE: TO ACHIEVE THE BEST CLARITY,
MAKE CERTAIN THAT THECAMERA IS
5 FEET WAY FROM THE SUBJECT
BEING PHOTOGRAPHED WHEN
TAKING PICTURES.
76379 Software Installation
IMPORTANT: Before attempting to install the software,
make sure that you do not have the camera or the USB
cable attached to your computer. This will affect the
install process and will cause your installation to fail.
Do not connect the cable to the computer until the
entire installation process of both PhoTags Express
and the Camera Driver has been completed. We
suggest you follow the step by step instructions that
will appear on your screen during the installation
process.
SECTION ONE- Software & Camera Driver Installation
1. Insert the CD into your CD-Rom drive. Make sure
that your camera is not connected to the
computer.
2. You will be prompted to select an installation
language. Select the language you want.
4
3. On the “Install your camera software” screen,
select your camera model from the drop down list
and click the “Install” button to install PhoTags
Express followed by the installation of PhoTags
WebCam Express and your camera driver.
4. On the “PhoTags Express" screen, click the
“Next” button.
5. Please
5
review the license terms and click the “Agree”
button to continue.
6. Let the “PhoTags Express” installer create the
folder where the program will be installed to, and
then click “Install”
7. Click “Finish” to let the “PhoTags Express”
installer finish the installation program.
6
8. This will automatically launch the Install shield for
the camera driver. Click “Next” to continue.
9. Once the program has finished installing you will
have to restart your computer.
10. Congratulations!! You have successfully installed
the “PhoTags Express” software, the “PhoTags
WebCam Express” and the Camera driver.
SECTION TWO – TAKING PHOTOS
Please be sure that the batteries are functional prior to you
using this camera to take photos. If you want to take photos:
1. Hold down the Shutter Button for 5 seconds to
wake up the Camera, the LCD at the back of the
7
camera will be active. The LCD display will show the
status of resolution and then show the number of
photos taken. Then you may download them into your
PC.
2. Find the image you would like to shoot and center the
image in the viewfinder.
3. Hold the camera steadily, and press the shutter button
to take photos (For optimum quality, please make
sure the subject is 5 feet from the camera lens.)
4. When you hear the buzzer beep once, (which
indicates that you have just taken a photo), you can
continue taking other photos;
5. If you press the Shutter button once and the buzzer
rings out twice, then you cannot take any photos at
this moment. Please download the photos into the PC
first. Alternatively, you can use the “Delete Button” to
select “ ” (to delete all of the photos in the cameras
memory) or “ ” (to delete the last photo taken) in
order to continue using the camera. When you see
either the ” or symbols, press the shutter button and
you will delete your photo or photos.
Note: When taking photos, the louder sound indicates a
successful photo taken; a lower sound beep indicates
the last photo taken was not taken properly.
Wake Up the Camera
If the digital camera is in the energy saving mode, please
hold down the Shutter Button for 5 seconds to wake up the
8
camera from energy saving mode in order to use the
camera.
Functions Shown on the LCD Display
Note: After turning the power on, the LCD display will show
the resolution setting (Hi / Lo) for 3 seconds, then
show how many photos you have already taken.
In order to conserve battery power (you will change the
batteries less often) the camera has a built-in power saving
mode. When the camera is in power saving mode, hold
down the shutter button for 5 seconds to “wake up” the
camera from the power saving mode.
Turn the camera on
Load the batteries and hold down the Start/Shutter Button
for 5 seconds or connect to computer via USB cable directly,
and the camera will start to work.
Using the Flash
This camera also has a built in flash. You’ll get best results
if you use the flash indoors only. There is strong possibility
that if used outdoors, the light will overexpose the photo.
1. Push the “Flashing Selection Button” to the side close
to “ ”, the flash lamp will start to be recharged and
after a few seconds the indicator will light up.
2. once the indicator light turns red, you can take pictures
with a flash by pressing the shutter button.
3. Now you can take digital photos in low light, and at
night. It should be noted, however, that if there is an
9
ample of light, your camera will not use a flash when
you take a picture, as it is not necessary.
Delete single photos
1. Press the Delete Button to select “ ” icon shown on the
LCD display.
2. Press the Shutter Button once within 5 seconds to
delete the last photo taken.
Delete all photos
1. Press the Delete Button to select “ ” icon shown on the
LCD display.
2. Press the Shutter Button once within 5 seconds to
delete all photos, which stored inside the camera.
Note: If you don’t press the shutter button within 5 seconds,
the operation for deleting photos will be not executed,
and the camera will return to the normal working status.
Photo Resolution Selection
Note: The resolution status will always show on the LCD
display in small character.
1. Press “Function button” to select “Hi” or “Lo”
character show on LCD.
2. “Hi” means VGA mode 640*480 pixels; “Lo” means
QVGA mode 320*240 pixels.
3. You can press the “Function Button” to switch
between the “Hi” and “Lo” mode. The Hi mode will
allow you to take 32 photos and the Lo mode will
allow you to take 117photos.
Inhaltsverzeichnis
Andere Sakar Digitalkamera Handbücher
Sakar
Sakar 98327 Bedienungsanleitung
Sakar
Sakar 94044 Bedienungsanleitung
Sakar
Sakar 57490 Bedienungsanleitung
Sakar
Sakar 24280 Bedienungsanleitung
Sakar
Sakar 84379 Bedienungsanleitung
Sakar
Sakar 16381 Bedienungsanleitung
Sakar
Sakar 28290 Bedienungsanleitung
Sakar
Sakar 14099 Bedienungsanleitung
Sakar
Sakar 26480 Bedienungsanleitung
Sakar
Sakar 87480 Bedienungsanleitung
Sakar
Sakar 92045 Bedienungsanleitung
Sakar
Sakar 16380 Bedienungsanleitung
Sakar
Sakar 16382 Bedienungsanleitung
Sakar
Sakar 87480 Bedienungsanleitung
Sakar
Sakar 94379 Bedienungsanleitung
Sakar
Sakar 15097 Bedienungsanleitung
Sakar
Sakar 23070 Bedienungsanleitung
Sakar
Sakar 59379 Bedienungsanleitung
Sakar
Sakar 24280 Bedienungsanleitung
Sakar
Sakar 11199 Bedienungsanleitung
