Sam4s ER-180U Series Bedienungsanleitung

SAM4s ER180U Quick Setup Guide

1. IMPORTANT - Before you Begin

a. The Cash Register is already setup for 10% GST on ALL departments. You can change this later on if you need a

Department that is GST FREE. Instructions are in the main user guide.

b. Please unpack all items and DO NOT power up the Register.

c. You do not need to complete any steps after Step 3. You only need Step 4 and beyond if you want to customise your

Receipts, Departments etc.

d. Follow each step below slowly and carefully to avoid making any mistakes.

2. Insert Paper

a. Remove the Tape that is holding the Printer Cover in place.

b. Using your Finger, lift the Cover upwards gently. It will pivot and pop open.

c. Now remove the Tape holding the Release Bar in place.

SAM4s ER180U Quick Setup Guide

d. Now, lift the Printer Release bar. It is fixed at the other end and will pivot open.

e. Remove and dispose of the Small Piece of Receipt Paper

f. Prepare a Roll of Thermal Paper and simply drop it in the paper holder in the position shown.

g. Now hold the top of the paper and push down on the Printer Release Bar to close it, as shown.

SAM4s ER180U Quick Setup Guide

h. Now feed the paper through the Printer Cover as shown.

i. Now replace the printer cover ensuring you locate the plastic tabs then snapping shut.

3. Cash Register FULL Reset

a. Ensure the Power is On at the wall but the Small Power Plug is NOT inserted into Register.

b. Register should be OFF. With NO power.

c. Now, press and HOLD the “Charge” Button whilst inserting the Small power plug into the Register.

d. You will hear a short beep. With 0.00 on the display.

e. Now press and release the FEED button

f. Now press and release the TAX button

g. Now press and release the MODE|CALC button

h. Now press and release the CASH/TEND button

i. “RAM ALL CLEAR OK!” will be displayed on the Receipt

SAM4s ER180U Quick Setup Guide

j. You have now Reset your Cash Register

k. Press the MODE|CALC button until the screen is displaying the “REG” Position.

l. The Register is ready for use! Continue to Step 4 to Add Receipt Names etc.

4. Receipt Header Programming (Add Shop Name, TAX Invoice, Phone Number etc)

a. Register should be ON.

b. Press the MODE|CALC button until the screen is displaying the “P” Position.

c. To change Line 1 of the Receipt

a. Enter the numbers 3 0 0 0 1 then press [SUB-TOTAL] Button

b. You are now programming Line 1 of your Receipt.

c. Using the White buttons you will notice each key has a letter of the alphabet on it.

d. Use these buttons to spell the words of your Shop. In this example “HOTPOS CAFÉ”

e. Use the [Tax/Space] button to add a Space in between words.

f. When complete, press [SUB-TOTAL]

d. To change Line 2 of the Receipt

a. Enter the numbers 3 0 0 0 2 then press [SUB-TOTAL] Button

b. You are now programming Line 2 of your Receipt.

c. Using the White buttons you will notice each key has a letter of the alphabet on it.

d. Use these buttons to spell the words: “TAX INVOICE”

e. Use the [Tax/Space] button to add a Space in between words.

f. When complete, press [SUB-TOTAL]

e. To change Line 3 of the Receipt

a. Enter the numbers 3 0 0 0 3 then press [SUB-TOTAL] Button

b. You are now programming Line 3 of your Receipt.

c. Using the White buttons you will notice each key has a letter of the alphabet on it.

d. Use these buttons to Insert your ABN number. Example: “ABN 73 895 253 111”

e. Use the [Tax/Space] button to add a Space in between words.

f. When complete, press [SUB-TOTAL]

f. To Change Line 4 of the Receipt

a. Enter the numbers 3 0 0 0 4 then press [SUB-TOTAL] Button

b. You are now programming Line 4 of your Receipt.

c. Using the White buttons you will notice each key has a letter of the alphabet on it.

d. Use these buttons to Insert your Phone Number. Example: “PH 1300 735 919”

e. Use the [Tax/Space] button to add a Space in between words.

f. When complete, press [SUB-TOTAL]

g. Once you have finished Receipt Header programming Press the [CASH/TEND] button to Save.

h. Press the MODE|CALC button until the screen is displaying the “REG” Position.

i. The Register is ready for use! Continue to Step 5 to change Departments

SAM4s ER180U Quick Setup Guide

5. Department Name Programming (Change the Name of Departments: Food, Drinks, Coffee etc)

a. Register should be ON.

b. Press the MODE|CALC button until the screen is displaying the “P” Position.

c. To Rename Department 1 of the Register

i. Enter the numbers 1 0 0 0 1 then press [SUB-TOTAL] Button

ii. You are now programming Department 1

iii. Using the White buttons you will notice each key has a letter of the alphabet on it.

iv. Use these buttons to spell the words of your NEW Department. In this example “FOOD”

v. Use the [Tax/Space] button to add a Space in between words.

vi. When complete, press [SUB-TOTAL]

d. To Rename Department 2 of the Register

i. Enter the numbers 1 0 0 0 2 then press [SUB-TOTAL] Button

ii. You are now programming Department 2

iii. Using the White buttons you will notice each key has a letter of the alphabet on it.

iv. Use these buttons to spell the words of your NEW Department. In this example “DRINKS”

v. Use the [Tax/Space] button to add a Space in between words.

vi. When complete, press [SUB-TOTAL]

e. To Rename Department 3 of the Register

i. Enter the numbers 1 0 0 0 3 then press [SUB-TOTAL] Button

ii. You are now programming Department 3

iii. Using the White buttons you will notice each key has a letter of the alphabet on it.

iv. Use these buttons to spell the words of your NEW Department. In this example “COFFEE”

v. Use the [Tax/Space] button to add a Space in between words.

vi. When complete, press [SUB-TOTAL]

f. Once you have finished Department Name programming Press the [CASH/TEND] button to Save.

g. Press the MODE|CALC button until the screen is displaying the “REG” Position.

h. The Register is ready for use! Please review some example transactions below.

SAM4s ER180U Quick Setup Guide

6. Sample Transaction - You sell 1 x Coffee at $3.00 and 1 x Salad Roll for $6.00

a. Press the MODE|CALC button until the screen is displaying the “REG” Position.

b. Enter the numbers 3 0 0 on the Grey Buttons. (This will enter $3.00 into the Register –You don’t insert the decimal point)

c. Now press Department 2 on the White Keys –Coffee Department

d. Enter the numbers 6 0 0 on the Grey Buttons. (This will enter $6.00 into the Register –You don’t insert the decimal point)

e. Now press Department 1 on the White Keys –Food Department

f. Press [SUB-TOTAL]

g. The Sub-Total of $9.00 is displayed on screen

h. Customer provides a $10.00 Note

i. Enter 1 0 0 0 on the Grey Buttons. (This will enter $10.00 into the Register –You don’t insert the decimal point)

j. Now Press [CASH-TEND]

k. The Change will be displayed on the screen and the cash drawer will open.

l. Transaction Complete.

Andere Handbücher für ER-180U Series

Inhaltsverzeichnis

Andere Sam4s Kasse Handbücher

Sam4s

Sam4s SER-7000 Bedienungsanleitung

Sam4s

Sam4s ER-350 II SERIES Bedienungsanleitung

Sam4s

Sam4s Electronic cash register Bedienungsanleitung

Sam4s

Sam4s ER-180T Betriebsanleitung

Sam4s

Sam4s SAP-6600 Bedienungsanleitung

Sam4s

Sam4s SPS-520 Montageanleitung

Sam4s

Sam4s SPS-500 Bedienungsanleitung

Sam4s

Sam4s ER-180 Bedienungsanleitung

Sam4s

Sam4s ER-180U Series Betriebsanleitung

Sam4s

Sam4s ER-5100? SERIES Bedienungsanleitung

Sam4s

Sam4s ER-180T Bedienungsanleitung

Sam4s

Sam4s NR-500 Series Betriebsanleitung

Sam4s

Sam4s SER 7000 Bedienungsanleitung

Sam4s

Sam4s ER-260 SERIES Bedienungsanleitung

Sam4s

Sam4s ER-260 SERIES Betriebsanleitung

Sam4s

Sam4s ER-5100? SERIES Bedienungsanleitung

Sam4s

Sam4s ER-390 SERIES Bedienungsanleitung

Sam4s

Sam4s ER-230 Series Fehlerbehebungshandbuch

Sam4s

Sam4s ER-5200 Fehlerbehebungshandbuch

Sam4s

Sam4s SPS-300 Series Betriebsanleitung

Sam4s

Sam4s SPS-300 Series Bedienungsanleitung

Sam4s

Sam4s ER-230 Series Fehlerbehebungshandbuch

Sam4s

Sam4s ER-180T Betriebsanleitung

Sam4s

Sam4s ER-180Series Betriebsanleitung

Beliebte Kasse Handbücher anderer Marken

Royal

Royal 480nt Bedienungsanleitung

Olivetti

Olivetti ECR 8200 S Bedienungsanleitung

TEC

TEC TEC FS-3600 Bedienungsanleitung

Integrated System Laboratory

Integrated System Laboratory ISL 4006 Bedienungsanleitung

Sharp

Sharp XE-A206 Stücklistenhandbuch

Samsung

Samsung ER 5215 Bedienungsanleitung

Toast

Toast Toast Bedienungsanleitung

Sharp

Sharp XE-A130 Kurzanleitung

TEC

TEC MA-600-1 series Bedienungsanleitung

QUORION

QUORION CR 1200 Bedienungsanleitung

Olivetti

Olivetti ECR 7700 LD eco Plus Bedienungsanleitung

Sharp

Sharp XE-A137-WH Operation Kurzanleitung

Sharp

Sharp XE-A203 - Cash Register Thermal Printing Graphic Logo... Bedienungsanleitung

TEC

TEC TEC MA-1060 Bedienungsanleitung

Casio

Casio PCR-408 Montageanleitung

ELCOM

ELCOM Euro-2100TE Bedienungsanleitung

American Changer

American Changer CLASSIC Series Bedienungsanleitung

Casio

Casio PCR-T273 Bedienungsanleitung