Samlexpower SA-600R Series Bedienungsanleitung
1
SA-600R Series
Pure Sine Wave Inverter
User’s Manual
2
Table of contents
1. Important Safety Information.……………………………………………… 1
1-1 General Safety Precautions…………………………………………… 1
1-2 Batteries Precautions………………………………………………….. 1
2. Features………………………………………………………………………... 2
2-1 Applications.……………………………………………………………. 2
2-2 Electrical Performance………………………………………………… 3
2-3 Mechanical Drawings………………………………………………….. 4
3. Instructions………………………………………………….………………… 5
3-1 Front Panel Operation..………………………………………………... 5~6
3-2 Rear Panel Operation..………………………………………………… 7~8
3-3 Installation………………………………………………………………. 9
3-4 Quick hook – up and Testing.………………………………………... 10~11
3-5 AC Safety Grounding………………………………………………….. 12~13
3-6 DC Wiring Connections…………………….…………………………. 13~14
3-7 Inverter Operation……………………………………………………… 15
4. Troubleshooting……….……………………………………………………… 16
5. Maintenance…………………………………………………………………… 17
6. Warranty……………………………………………………………………….. 17
1
1
1. Important Safety Information
1-1. General Safety Precautions
1-1-1. Do not expose the Inverter to water, mist, snow, or dust. To reduce
the risk of hazard, do not cover or obstruct the ventilation shaft.
Do not install the Inverter in a zero-clearance compartment.
Overheating may occur.
1-1-2. To avoid the risk of fire and electronic shock, make sure that existing
wiring is in good electrical condition and not undersize.
Do not operate the Inverter with damaged or substandard Wiring.
1-1-3. There are some components in the inverter can cause arcs and sparks.
To prevent from fire or explosion, do not put batteries, flammable
materials, or anything should be ignition–protected around the inverter.
1-2. Precautions When Working with Batteries
1-2-1. If battery acid contacts your skin or clothing, you need to wash it out
immediately with soap and water. If acid enters into your eyes,
immediately flush your eyes with running cold water for at least 20
minutes and get medical attention immediately.
1-2-2. Never smoke or make a spark or flame in the vicinity of batteries or
Engines.
1-2-3. Do not drop a metal tools on the battery.The resulting spark or short-
circuit on the battery or other electrical parts may cause an explosion.
1-2-4. Remove personal metal items such as rings, bracelets, necklaces, and
watches when working with a lead-acid battery,
A lead-acid battery may produce a short-circuit current who’s
temperature is high enough to weld these metal items and cause a
severe burn.
WARNING!
Before installing and using the Inverter, you need to read
following safety information carefully.
2
2. Features
Pure sine wave output (THD < 3%)
Output frequency：50 / 60Hz switch selections
Input & output fully isolated design
High efficiency 88~94%
Driving highly reactive & capacitive load at start moment
Tri-Color indicators show input voltage & output load level
Loading controlled cooling fan
Advanced microprocessor
Protection：Input low voltage Overload Short circuit
Low battery alarm Input over voltage Over temperature
2-1. Applications
2-1-1. Power tools – circular saws, drills, grinders, sanders, buffers, weed and
hedge trimmers, air compressors, etc.
2-1-2. Office equipment – computers, printers, monitors, facsimile machines,
and scanners, etc.
2-1-3. Household appliances – vacuum cleaners, fans, fluorescent and
incandescent lights, shavers, sewing machines, etc.
2-1-4. Kitchen appliances – microwave ovens, refrigerators and freezers,
coffee makers, blenders, ice makers, toasters, etc.
2-1-5. Industrial equipment – metal halide lamp, high – pressure sodium lamp,
etc.
2-1-6. Home entertainment electronics – television, VCRs, video games,
stereos, musical instruments, satellite equipment, etc.
3
2-2. Electrical Performance
Specification Model No.
Item SA-600R-112 SA-600R-124
Continuous Output Power 600W
Maximum Output Power (3Min.) 680W
Surge Rating 800W
Input voltage 12V 24V
Output Voltage 100 / 110 / 120V +/- 3%
Frequency
(Switch Selections) 50 / 60Hz +/- 0.05%
Efficiency (full load) 87.0% 90.0%
No Load Current Draw 0.87A 0.43A
Output Waveform Pure Sine Wave ( THD < 3% )
Output voltage Regulation 100 / 110 / 120V RMS -10%/+4%
Input Voltage Regulation 10.5-15 VDC 21.0-30 VDC
Input Level Indicator Red / Orange / Green LED
Load Level Indicator
Failure Indicator Red LED
Protection Overload, Short Circuit, Reverse Polarity (Fuse),
Over / Under Input Voltage, Over Temperature.
Safety Certification UL458
EMC FCC Class B
Operating Temperature Range 0 - 33
℃
Storage Temperature Range -30
℃
to 70
℃
Cooling Loading controlled cooling fan
Dimensions 295(L) x 180(w) x 72(H) mm / 11.61(L) x 7.09(W) x 2.83(H) Inch
Weight 2.7 kg / 5.4 Lbs.
Note: The specifications are subject to change without notice.
4
2-3. Mechanical Drawing
5
3. Instructions
This power inverter series is one of the most advanced line of mobile AC power
systems.
To get the most effective power inverter, it must be installed and used properly.
Please read the instructions of this manual before you install and operate this
model.
3-1. Front Panel Operation：
3-1-1. Front view：
PURE SINE WAVE INVERTER
3-1-2. ON / OFF switch
Leave the switch in the down position (OFF) during installation.
3-1-3. Input Level: Display Input Voltage
LED Status DC 12V DC 24V
Slow Red Blink 10.5~10.9 21.0~21.8
Red 10.9~11.3 21.8~22.6
Orange 11.3~12.0 22.6~24.0
Green 12.0~14.0 24.0~28.0
Orange Blink 14.0~14.7 28.0~29.4
Over Red Blink 14.729.4
6
3-1-4. Load Level：Display AC Load Watts
LED Status Load Condition
Dark 0 ~ 30W
Green 30W ~ 200W
Orange 200W ~ 450W
Red 450W ~ 580W
Red Blink Over 580W
3-1-5. Failure：Display failure status
OVP：over voltage protection
UVP：under voltage protection
OTP：over temperature protection
OLP：over load protection
3-1-6. AC outlet (Outlet Sockets available)
North America (GFCI)
North America
Continental Europe (SCHUKO)
Australia / New Zealand
United Kingdom
7
3-2. Rear Panel Operation
POS(+)
DC INPUT
WARNING:REVERSE POLARITY
WILL DAMAGE UNIT
CHASSIS
GROUND
NEG(-)
WARNING:REVERSE POLARITY
WILL DAMAGE UNIT
CHASSIS
GROUND
REMOTE
PORT
DC INPUT
NEG(-) POS(+)
3-2-1. Remote ON / OFF switch for SA-600R model only
3-2-1-1. To operate the inverter with Remote ON / OFF switch, ON /
OFF switch on the Front Panel should be off
3-2-1-2. Ensure the remote control contact is off.
3-2-1-3. Use 14 ~ 20 AWG wire to connect the Rear Panel Terminal
marked “REMOTE PORT” to the remote control contact. If
the remote control contact is in a state of low impedance
(short), the inverter will be turned ON. If the remote control
contact is in a state of high impedance (open), the inverter will
be turned OFF.
8
3-2-2. Ventilation Shaft
Be sure to keep it a distance (at least 1 inch) form surrounding things.
3-2-3. Input terminals
Connect the input terminal to 12V / 24V battery or other 12V / 24V
power source.
【＋】represents positive, and【－】represents negative. Reverse
polarity connection will blow the internal fuse and may damage the
inverter permanently.
3-2-4. Use wire #8 AWG to connects Chassis ground with Vehicle Chassis.
WARNING!
Operating the inverter without a proper ground
connection may cause an electrical safety hazard.
8
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Samlexpower Wechselrichter Handbücher
Samlexpower
Samlexpower SAM-100-12 Bedienungsanleitung
Samlexpower
Samlexpower PSE-12125A Bedienungsanleitung
Samlexpower
Samlexpower SAM-1500C-12 Bedienungsanleitung
Samlexpower
Samlexpower Evolution EVO-2212 Bedienungsanleitung
Samlexpower
Samlexpower SAM-250-12 Bedienungsanleitung
Samlexpower
Samlexpower Evolution EVO-2212 Bedienungsanleitung
Samlexpower
Samlexpower VR175 Bedienungsanleitung
Samlexpower
Samlexpower PST-60S-24A Bedienungsanleitung
Samlexpower
Samlexpower Samlex Solar SSP-100-KIT Bedienungsanleitung
Samlexpower
Samlexpower Pure Sine PST-60S-12E Bedienungsanleitung
Samlexpower
Samlexpower PST-60S-48E Bedienungsanleitung
Samlexpower
Samlexpower SI-A1-VR1500 Bedienungsanleitung
Samlexpower
Samlexpower PST-30S-12A Bedienungsanleitung
Samlexpower
Samlexpower PSE-12125A Bedienungsanleitung
Samlexpower
Samlexpower PST-200S-12A Bedienungsanleitung
Samlexpower
Samlexpower Evolution Series Bedienungsanleitung
Samlexpower
Samlexpower PST-300-12 Bedienungsanleitung
Samlexpower
Samlexpower SAM-1000-12 Bedienungsanleitung
Samlexpower
Samlexpower PST-30S-12A Bedienungsanleitung
Samlexpower
Samlexpower PST-1000-12 Bedienungsanleitung
