Samson 41-23 Series Service-Handbuch

Mounting and

Operating Instructions

EB 2595 EN

Edition November 2014

Accessories

Compensation chamber for

Type41-23 (2412/2413) and Type41-73 (2417/2413) Regulators

as well as

Type2424, Type2425, Type2426, Type2427 and Type2429 Actuators

SAMSON AG · MESS- UND REGELTECHNIK

Weismüllerstraße 3 · 60314 Frankfurt am Main, Germany

Phone: +49 69 4009-0 · Fax: +49 69 4009-1507

[email protected] · www.samson.de

EB 2595 EN

2015-08-18 · English

3 Operation

Proceed as follows:

−Unscrew the ller plug on the chamber

and undo the vent screw on the dia-

phragm actuator.

−For applications with steam: use the sup-

plied plastic funnel or a watering can to

ll the chamber with water until it over-

ows at the vent hole on the actuator.

For applications with other liquids, ll the

compensation chamber with the process me-

dium.

−Screw the ller plug back on the cham-

ber and tighten.

1 Application

A compensation chamber is installed in the

control line together with the listed regulators

and actuators. The liquid lled in the cham-

ber (water for steam control) acts as a buffer

for process medium temperatures above

150°C and for steam. It prevents any hot

process medium coming into direct contact

with the actuator diaphragm and damaging

it.

2 Installation

Install the compensation chamber at the

highest point of the control line. Make sure

that the control line between the diaphragm

chamber and compensation chamber as well

as between the pipeline and the compensa-

tion chamber inclines downwards at a ratio

of at least 1:10.

Connect the control line at the side of the

pipeline transporting the process medium or

the manifold.

The mounting position of the chamber is in-

dicated on the chamber by an adhesive la-

bel with an arrow as well as by the word

oben (top) impressed on the chamber. It is

imperative that the mounting position of the

chamber is observed to guarantee the safe

functioning of the regulator.

Weld the control line coming from the pres-

sure tapping point to the R

socket of the

chamber.

Andere Handbücher für 41-23 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samson Steuereinheit Handbücher

Samson

Samson 44-6 B Service-Handbuch

Samson

Samson 2417 Series Service-Handbuch

Samson

Samson 3248 Service-Handbuch

Samson

Samson EB 20b Service-Handbuch

Samson

Samson 2405 Series Service-Handbuch

Samson

Samson 2404-2 Service-Handbuch

Samson

Samson Pfeiffer BR Series Bedienungsanleitung

Samson

Samson 3354 Service-Handbuch

Samson

Samson EB 3967 EN Service-Handbuch

Samson

Samson 2333 series Service-Handbuch

Samson

Samson 2412 Series Service-Handbuch

Samson

Samson 3323 Service-Handbuch

Samson

Samson 3246 Service-Handbuch

Samson

Samson 3286 Service-Handbuch

Samson

Samson 42-36 E Service-Handbuch

Samson

Samson 2488 N Service-Handbuch

Samson

Samson 3251 Service-Handbuch

Samson

Samson 3241-1-Gas Service-Handbuch

Samson

Samson 3241 Service-Handbuch

Samson

Samson 2488/5 Series Service-Handbuch

Samson

Samson 41-73 Series Service-Handbuch

Samson

Samson 3222 N Service-Handbuch

Samson

Samson 3251-E Service-Handbuch

Samson

Samson 33-7 Service-Handbuch

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung