Samsung SmartThings Hub Bedienungsanleitung

www.samsung.com

USER MANUAL

01/2023. Rev.1.0

EP-P9500

SmartThings Station

Table of Contents

English

Español

한국어

Getting started

Device layout and functions

Reset button

Smart button

Wireless charging

indicator light

Hub indicator light

Charging coil

Charger port

(USB Type-C)

Buttons

You can launch simple features using the SmartThings Station’s buttons.

Button Function

Smart button

•

Press to verify the SmartThings Station during the initial

setup.

•

Press to launch the pre-set feature via the SmartThings

app.

Reset button

•

Press and hold for more than 7 seconds to reset the

SmartThings Station.

English

Getting started

Indicator lights

You can view the current status of the SmartThings Station by the changes in the

indicator lights.

▶

Wireless charging indicatorlight

Status Function

Flashing red

→

green

→

yellow

•

When connected to a power outlet

Red

•

Charging a device

Green

•

When the device is fully charged

Flashing red

•

Charging error

Flashing yellow

•

When connecting to an unauthorized wall charger

▶

Hub indicator light

Status Function

Flashing blue

•

When booting, during initial setup, when initializing

SmartThings hub

Flashing blue then turns

off

•

When pressing and holding the Smart button

Flashing blue three

times

•

Connection complete

Flashing red

→

green

→

blue

•

Waiting to connect to SmartThings hub, smart home

devices connection mode

Flashing yellow for

3 minutes then turns off

•

No network connection, network error

Blue

•

SmartThings hub connected

If the indicator lights do not operate properly or are recognized incorrectly,

disconnect the wall charger and connect it again.

English

Getting started

Turning the SmartThings Station on

1 Connect the USB cable and the wall charger.

2 Connect the USB cable to the SmartThings Station’s charger port.

The indicator lights flash and the SmartThings Station turns on.

The wireless charger is not compatible with chargers that do not support Adaptive

fast charging and Super fast charging features. To use the 15 W Fast charging

2.0 feature, use the Samsung approved charger (9.0 V/2.77 A) supplied with the

SmartThings Station, super fast charger, or a PD (Power Delivery) charger which is

25 W and higher. If a PD charger less than 25 W or fast charger is used, the 7. 5 W fast

wireless charging 1.0 feature may work.

QI want to turn off the power.

AThis SmartThings Station does not have a power button. Simply unplug the wall

charger from the electric socket.

English

Using the SmartThings Station

Using it as a SmartThings hub

Starting the SmartThings Hub

Connecting your mobile device to Wi-Fi

You can use the SmartThings Station wherever you can connect to Wi-Fi. Before using

the SmartThings Station, make sure the Wi-Fi works properly.

On your mobile device’s settings screen, turn on Wi-Fi and connect to a Wi-Fi network.

•

Connect within 1 m of the Wi-Fi router. The usage distance may vary depending

on the environment.

•

For secured Wi-Fi, enter the password to connect.

•

You may fail to connect to Wi-Fi in the following situations:

‒

When trying to connect to the Wi-Fi of a public facility, company, or

dormitory which has a security policy

‒

When trying to connect to a home router installed by a carrier haphazard

operation

‒

When trying to connect to a router on which certain ports are restricted

English

Using the SmartThings Station

Installing the SmartThings app on your mobile device

Before using the SmartThings Station, you should install the SmartThings app on your

mobile device.

Depending on your mobile device, you can download the SmartThings app from the

following places:

•

Samsung Android mobile devices:

Galaxy Store

Play Store

•

Other Android mobile devices:

Play Store

•

iPhone:

App Store

•

You must register and sign in to your Samsung account to use the SmartThings

app.

•

Update to the latest version of the SmartThings app.

•

Supported features may vary depending on your mobile device and its operating

system.

Initial setup

1 When the hub indicator light flashes red

→

green

→

blue, bring your mobile device

near the SmartThings Station.

2 If the connection pop-up window appears on your mobile device, tap

Add now

If the connection pop-up window does not appear, launch the

SmartThings

app, tap

Devices

→

Add device

, and then tap

Scan

under

Scan QR code

to scan the QR

code (

)at the bottom of the SmartThings Station.

English

Using the SmartThings Station

3 Follow the on-screen instructions to complete the connection.

When the connection is complete, your SmartThings Station card will appear. Tap

on your SmartThings Station card to check it and use the various features of the

SmartThings Station.

•

If the initial setup is not completed or the SmartThings Station is not detected,

press the Reset button for 7 seconds to reset it.

•

After completing the initial setup, the Wi-Fi and the Samsung account

information will be registered to your SmartThings Station. Even if you unplug

the wall charger from the electric socket and reconnect it, you will be able to use

the SmartThings Station without any configuration.

Connecting devices

You can connect smart home devices, such as sensors, lights, smart plugs, and more.

Control and manage various smart home devices.

Adding smart home devices

Before you use the SmartThings Station as a SmartThings hub, you must connect

the smart home devices that support SmartThings hub to the SmartThings app. The

connected smart home devices will be registered to the same Samsung account as the

SmartThings Station.

1 On your mobile device, launch the

SmartThings

app.

2 Tap

Devices

→

English

Using the SmartThings Station

3 Scan the smart home device’s QR code or select it from the devices list, and follow the

on-screen instructions to connect it.

•

Devices certified by Matter and Zigbee can be connected to the SmartThings

Station, and the availability to connect to SmartThings may vary depending on

the models.

•

If the added device cannot be connected to the SmartThings Station, reset the

device and connect it again.

•

For details on how to enter connection mode, refer to the device’s user manual.

•

If the SmartThings Station has been turned off for a long time or the Wi-Fi

connected to the SmartThings Station has been disconnected for a long time,

previously connected smart home devices may be disconnected. Reconnect the

smart home devices to the SmartThings app before using them.

•

To view the connected devices, tap the SmartThings Station card and tap

Controls

. The list of connected devices will be displayed under

Hub

Finding a location

You can check the location of nearby devices, such as mobile devices like smartphones

and tablets.

Finding the locations of mobile devices with the Smart button

You can check the location of your mobile device by using the Smart button on the

SmartThings Station.

1 On your mobile device, launch the

SmartThings

app and tap

Devices

2 Tap the SmartThings Station card and tap

Controls

→

Double press to find phone or

tablet

3 Tap the switch to activate it.

4 Select the mobile device you want to find on the device list and press the Smart

button on the SmartThings Station twice.

The selected mobile device will ring for a minute.

•

You must have SmartThings Find installed to use this feature.

•

The mobile devices logged into your Samsung account appear on the device list.

Mobile devices that are no longer in use can be deleted through the Find My

Mobile website (smartthingsfind.samsung.com).

English

Using the SmartThings Station

Finding the locations of nearby devices

You can update the location information of nearby devices by using the SmartThings

Station. For example, even if you are outside, you can check the location of Galaxy Buds

that have fallen under the sofa at home.

1 On your mobile device, launch the

SmartThings

app and tap

Devices

2 Tap the SmartThings Station card and tap

→

Settings

→

Locate nearby devices

Set the location information of the SmartThings Station.

To check the location information of nearby devices, tap

Find

under

Related services

Finding a location with SmartThings Find

You can use the SmartThings Find feature to check the location of Galaxy devices.

1 On your mobile device, launch the

SmartThings

app and tap

Devices

2 Tap the SmartThings Station card and tap

Controls

3 Tap

Find

under

Related services

The location of the Galaxy devices registered to your Samsung account will be

displayed on the map.

Control devices with multiple people

Multiple users can check the status and control the SmartThings Station and its

connected smart home devices. This feature is only available for Android mobile device

users and requires the latest version of the SmartThings app. Also, it can only be

launched while the other user’s mobile device screen is on or the SmartThings app is

running.

1 On your mobile device, launch the

SmartThings

app and tap

Devices

2 Tap the SmartThings Station card and tap

Controls

→

Press and hold to invite

members

3 Tap the switch to activate it.

4 Press and hold the SmartThings Station’s Smart button for more than 2 seconds.

A pop-up window will appear on your friend’s mobile device to request to join the

place.

English

Andere Handbücher für SmartThings Hub

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Samsung Akkuladegerät Handbücher

Samsung

Samsung EP-N5105 Bedienungsanleitung

Samsung

Samsung SGH-F278i Bedienungsanleitung

Samsung

Samsung EP-N5100TBEGWW Bedienungsanleitung

Samsung

Samsung EP-NG930 Bedienungsanleitung

Samsung

Samsung EP-P3105 Bedienungsanleitung

Samsung

Samsung EP-N5200TBEGGB Bedienungsanleitung

Samsung

Samsung EP-PN920 Bedienungsanleitung

Samsung

Samsung WIRELESS CHARGER DUO Bedienungsanleitung

Samsung

Samsung EP-N3300TBEGGB Bedienungsanleitung

Samsung

Samsung EP-P3105 Bedienungsanleitung

Samsung

Samsung EP-P2400 Bedienungsanleitung

Samsung

Samsung EP-NG930BW Bedienungsanleitung

Samsung

Samsung EP-TG928 Bedienungsanleitung

Samsung

Samsung EP-PA710 Bedienungsanleitung

Samsung

Samsung Tray Design Bedienungsanleitung

Samsung

Samsung EP-PA510 Bedienungsanleitung

Samsung

Samsung EP-N3300 Bedienungsanleitung

Samsung

Samsung EP-PA510 Bedienungsanleitung

Samsung

Samsung TRIO EP-P6300TBEGEU Bedienungsanleitung

Samsung

Samsung EP-P5200 Bedienungsanleitung

Samsung

Samsung EP-PG950 Bedienungsanleitung

Samsung

Samsung EP-PN915IWU Bedienungsanleitung

Samsung

Samsung EP-PG920I Bedienungsanleitung

Samsung

Samsung EP-N5200 Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung