Samsung HMX-M20BN Bedienungsanleitung

User Manual

Back Light

When a subject islit from behind,thisfunctioncompensatesfor theback lightingse that thesubject does not

appeartoo dark,

PRECHECK!

Selectthe Video(_) or Photo ( _ ) mode by pressingthe MODE button. '-*page49

io Touch the Menu (_¢Nu})tab -* "Back Light."

2o Touch a desired submenu item• _'_ _>L_

3o To exit the menu, touch the Exit (D) or Return (_) tab.

• Off : Disables the function

On (_0): Backlight compensation brightens the subject.

Dynamic Range

The Dynamic range function bnghtens subjects in dark environments, and records more detailed images.

PRECHECK!

Selectthe Video(_) or Photo ( _ ) mode by pressingthe MODE button. '-*page49

io Touch the Menu (_-Nu!)tab -*"Dynamic Range."

2o Touch a desired submenu item•

3o To exit the menu, touch the Exit (Q) or Return (_) tab.

• Off : Disables the function.

On (_): Brightens subjects and records more detailed images.

Using the Flash function, you carl set the built in flash to fire in different ways.

PRECHECK!

Select the Photo (_ ) mode by pressing the MODE button. _page 49

1o Touch the Menu (_ui) tab -_"FLash."

2o Touch a desired submenu item.

3o To exit the menu, touch the Exit (D) or Return (_}) tab.

Off (®): The flash does not fire.

Auto (€*): The flash fires automatically under low light conditions.

Red-Eye (_): "Red-eye" is the phenomenon where eyes look reddish in photographs taken with

a flash in dark environments. Use the Red-eye flash option to reduce this phenomenon.

Fillqn (@): The flash fires regardless of the environmental light conditions. Use this flash mode

when photographing against the light to brighten the subject.

Slow Sync (_,1_):Use when you are using a slow shutter speed under low light conditions. Syncs

the flash to the low shutter speed so that the background and subject have the same brightness.

,, Do not fire the flash with the flash bulb covered with your hand.

,, Do not fire the flash close to people's eyes as the subjects could suffer a temporary loss of vision.

,, The optimum distance from the camcorder to the subject when using the builtqn flash is 7 to 10 feet.

Battery power is consumed faster with repeated use of the flash.

The flash function is not available:

When you have enabled "Cont. Shot"

When you are recording videos

When you are capturing still images during video recording (Dual Recording).

The red-eye reduction may not produce the desired effect due to individual differences, ifthe subject

is moving, or when the subject is far from the camcorder.

Thecamcorderusuallyfocusesonasubjectautomatically(autofocus),Whenyouturnthecamcorderon,

focusisalwaysinitiallysettoauto-focus,Youcanalsosetthefocustomanualasneeded,

PRECHECK!

Select the Video (_) or Photo ( I1_) mode by pressing the MODE button. _page 49

1. Touch the Menu (_) tab -* "Focus."

2. Touch a desired submenu item.

3+ To exit the menu, touch the Exit (D) or Return (_) tab.

• Auto: In most situations, it is better to use the automatic focus

feature, as it enables you to concentrate on the creative side of

your recording.

• Manual (Z,,_]):Manual focusing may be necessary under certain

conditions that make automatic focusing difficult or unreliable.

Touch ([_) or (_) tab to adjust the setting values you want.

. Touch Point (_): Touch the subject shown on the LCD screen

you want the camcorder to focus on. (Video Record mode only)

Understanding the Touch Point

Using the Touch Point function, you can focus on a small section of the

picture.

Touch Point function is only available in Video Recording mode.

However, you can also adjust the focus in the Photo Recording mode.

See "Magic Touch," _page 75.

To activate the Touch Point with a long touch

You can activate the Touch Point function by pressing the section

of the LCD screen you want the camcorder to focus on for about

2 seconds. (Does not work when "Tele Macro," "Face Detection,"

"Digital Zoom," or "Slow Motion" are on.)

+ The Auto Focus (AF:)setting is useful when you operate the zoom function because you might not

be able to keep accurate focus after you've changed the zoom ratio,

+ Inthe manual focus setting menu screen, you can activate auto focus by touching the AF (_) tab

on the screen, Return to manual focus by touching the manual focusing tabs,

+ When the Touch Point function is enabled, you can touch the AF ([:_;_i))tab on the LCD screen to

set the "Focus" to "Auto."

+ To disable the Touch Point function, set "Focus" to "Auto."

Face Detection

Your camcorder carl detect a subject's face and automatically adjust brightness, focus, and image quality to

the optimal settings. Face Detection record faces more vividly.

PRECHECK!

Selectthe Video(_) or Photo ( _ ) mode by pressingthe MODE button. _page 49

1. Touch the Menu ([_ /})tab -*"Face Detection."

2. Touch a desired submenu item. _, >

3o To exit the menu, touch the Exit (_) or Return (_) tab.

................................................................................................................................................................................................................................................................................................................................4_//t?

• Off: Disables the function.

On (D:): Records under the optimal condition by detecting

faces automatically.

Off, Normal, Smile Shot, Smart Recognition, Face List, My Star

• The Face Detection feature will not work if you frame the side of a person's face or if

there is not enough light. You must be facing subjects "head-on" and they must be well lit.

If a memory card is not inserted, some Face Detection menu items may appear dimmed.

Taking photos with Normal face detection

The camcorder cars detect up to 12 faces and set the focus and exposure

automatically.

1o Inthe submenu items, touch "Normal."

A double frame icon

appears orsa face

centered orsthe LCD

screen. Ors other

faces not centered,

a single frame icon

appears.

,, The closer the subject, the quicker the camcorder detects the face.

To change the focus to a face in a single frame, touch the face. 71

Taking photos wit.h Smile Shot

When the subject is adjusted on the L©D screen, the camcorder detects a

smiling subject and record Jt automatically.

1o In the submenu items, touch "Smile Shot."

2o Center the smiling face in the LCD screen.

• When the camcorder detects the smiling face, it automatically

takes a picture. You do not need to press the [Shutter].

__A big smib

helps the

camera detect

the face.

Smart Recognitior_

Thecamcorder automaticallyregistersfacesthat you frequentlyphotograph,

Thisf_atureautomaticallyprionfizesthe focuson thosefacesand orsfavorite

(MyStar)faces.You must havea memory card installedto use thisfunction,

1o Inthe submenu items, touch "Smart Recognition."

The double frame icon appears on the face centered in the LCD screen. Ors faces not centered, the single

frame icon appears.

(Z) : A face registered to My Star.

(To register to My Star, refer to page 73)

() : A face automatically registered by the camcorder.

The camcorder may detect the same face differently depending on changing conditions

such as whether the person is wearing glasses, different postures, lighting, etc.

• The camcorder registers up to 20 of the most frequently detected faces. If it has

registered 20 faces, and then registers a new face, the face with the lowest priority is

replaced with the new face. However, the camcorder can only register up to 12 faces if

you have registered the maximum of 8 My Star faces.

• The camcorder can detect up to 8 faces in a scene.

ota_ in Photo Record mode_

Registering My o

By registering faces that are frequently recorded, you can adjust focus and

exposure before recording, You must have a memory card installed to use

this function,

1o In the submenu items, touch "My Star"

2o Focus on the desired face to register, then press the PHOTO

button.

• For better detection performance, we recommend you record

up to 5 photos of the left, right, and front of a face.

• Record and register only one face at a time.

3o To save the recorded face, touch the (oL0_)tab.

• When you take 5 photos of a face, the face is automatically

registered to My Star without the need to touch the (oLt_)tab.

4o Inthe Play mode, touch the Play (_) tab _ ([_g-_'})tab.

• The face registered to My Star is displayed with _ in the face list.

£g£

[:::_3

You can register up to 8 people to My Star.

o The camcorder disables the flash when recording My Star faces. You cannot turn it on.

o To register the same face to My Star again, delete the previously registered face.

Changing pnodty of _egiste_ed faces in Photo Record mode

You can only delete faces or change the priority order of faces that are

registered to My Star, You must have a memory card instaJled to use this

function,

1o Inthe Play mode, touch the Play (_) tab -_ (_) tab.

• To cancel My Star, touch (_).

• To display only My Star, touch (_i).

2o Touch the (_) tab.

3o Touch (_), then select the face you want to change.

4o Touch the (_)/([_) tabs to re-arrange the priority order, then

touch the ([_]) tab.

if there is no registered face, Face List ([_) is dimmed.

Magic Touch

Simply touch the area on the L©D screen that you want to focus on when taking a photo,

PREOHECK!

Select the Photo (1_) mode by pressing the MODE button. _page 4{)

io Touch the Menu (@) tab -*"Magic touch."

2o Touch a desired submenu item.

3o To exit the menu, touch the Exit (Q) or Return ( ) tab. E£3

• Off: Disable the function.

• On (o4): Simply touch the subject displayed on the LCD

screen that you would like the camcorder to focus on. The

camcorder also adjusts brightness to the optimal value.

Using Magic Touch

Using the Magic Touch function, you cars focus ors a small section of a

pbture.

You can also activate Magic Touch by pressing the same point on the

LCD screen for about 2 seconds.

To take a picture when the Magb Touch function is ors,press the

PHOTO button or simply touch the subject shown orsthe LCD screen,

and then hold for about 2 seconds.

When the Magic Touch function is ors, you carstouch the AF (_) tab

orsthe LCD screen to reset the "Focus" to "Auto."

• You cannot use the following settings with the "Magic Touch" function:

"Back Light," "Face Detection," "Focus: Manual," "Digital Zoom" or "Metering."

Even if the you enabled "Cont.Shot," you cannot initiate continuous shooting by touching the LCD

screen.

Youcanchoosethemeteringstandardforthebrightnessofyoursubject,

PREOHECK!

Selectthe Photo (1_) mode by pressingthe MODE button. _page 49

io Touch the Menu (_) tab -*"Metering."

2o Touch a desired submenu item.

3o To exit the menu, touch the Exit (_) or Return ( ) tab.

• Multi (E_]): Meters multiple portions of a scene to determine the appropriate aperture size.

® Center (_:o;_):Measures an entire scene with an emphasis on the center to determine the aperture size.

® Spot ([_o_): Measures only the center of a scene to determine the aperture size.

Use the Anti--Shake (HDIS: Hyper Digital Image Stabilizer) function to compensate for unstable images caused

by shaking when holding the camcorder,

PREOHECK!

Select the Video (_) or Photo (ll_J) mode by pressing the MODE button. _page 49

i o Touch the Menu (IM_!) tab -*"Anti-Shake (HDIS)."

2o Touch a desired submenu item.

3o To exit the menu, touch the Exit (O) or Return ([z_J) tab.

,, Off : Disable the function.

On ( C_ ): The Anti-Shake (HDIS) function is enabled to compensate for

shaking movements.

Use the Anti-Shake function in the following cases:

• When recording while walking or riding in a moving car.

When recording with the zeom function.

When recording subjects of a small size.

,, The Anti-Shake function may not correct gross camcorder shake entirely. To decrease shake, hold the

camcorder fimly with both hands.

', When this function is "On," the actual movement of the subject and the movement displayed on the screen

may be slightly different.

- When recording in dark lighting at high magnification while this function is "On," afterqmages may stand

out. if this occurs, we recommend using a tripod (not supplied) and turning the "Anti-Shake" to "Off."

Andere Handbücher für HMX-M20BN

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Camcorder Handbücher

Samsung

Samsung SMX- C10RP Bedienungsanleitung

Samsung

Samsung SC-DC171 Kurzanleitung

Samsung

Samsung SCA20 Bedienungsanleitung

Samsung

Samsung VP-D300 Betriebsanleitung

Samsung

Samsung VP-X205L Betriebsanleitung

Samsung

Samsung SC-D107 Betriebsanleitung

Samsung

Samsung VP-L2000 Bedienungsanleitung

Samsung

Samsung VP-L600B Einrichtungshandbuch

Samsung

Samsung SC-MX10 Bedienungsanleitung

Samsung

Samsung SCD 5000 Einrichtungshandbuch

Samsung

Samsung VP-D23 Bedienungsanleitung

Samsung

Samsung VP-W80U Bedienungsanleitung

Samsung

Samsung SCD24 Betriebsanleitung

Samsung

Samsung VP-D6040 Betriebsanleitung

Samsung

Samsung SC-X205 Bedienungsanleitung

Samsung

Samsung SC-HMX10C Bedienungsanleitung

Samsung

Samsung SC-HMX20C Bedienungsanleitung

Samsung

Samsung VP-D23 Betriebsanleitung

Samsung

Samsung HMX-W200RN Bedienungsanleitung

Samsung

Samsung SC-D590 Bedienungsanleitung

Samsung

Samsung VP-DX100H Bedienungsanleitung

Samsung

Samsung SMX F34 - Camcorder - 680 KP Bedienungsanleitung

Samsung

Samsung VP-D964Wi Einrichtungshandbuch

Samsung

Samsung AD68-00541C Betriebsanleitung

Beliebte Camcorder Handbücher anderer Marken

Toshiba

Toshiba CAMILEO Z100 Bedienungsanleitung

Panasonic

Panasonic NV-VS40B Bedienungsanleitung

Canon

Canon RC 260 Bedienungsanleitung

Sony

Sony Handycam DCR-DVD7E Bedienungsanleitung

Brinno

Brinno TimeLapse TLC200 Bedienungsanleitung

JVC

JVC GR-SXM68AC Kurzanleitung

Panasonic

Panasonic AG-HMC152EN Bedienungsanleitung

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Bedienungsanleitung

MYDLINK

MYDLINK DCS-6100LH Bedienungsanleitung

Sony

Sony video Hi8 Handycam CCD-TR555 Bedienungsanleitung

SECURECOM

SECURECOM V-5014B Bedienungsanleitung

Panasonic

Panasonic HDC-SD100 Bedienungsanleitung

Sharper Image

Sharper Image U-VIDEO Bedienungsanleitung

JVC

JVC AA-V15EG Bedienungsanleitung

Canon

Canon LEGRIA HV40 Bedienungsanleitung

Sony

Sony Handycam DCR-VX2000 Bedienungsanleitung

RCA

RCA CC616 Bedienungsanleitung

Panasonic

Panasonic NVM40 Bedienungsanleitung