Samsung OMN Bedienungsanleitung

Smart Signage User Manual (By Model)

This manual provides information about your Smart Signage including supported types and product specications per model.

Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than Samsung Electronics are

property of their respective owners.

OMN (OM46N OM55N)

OMN-D (OM46N-D OM55N-D)

The colour and the appearance may differ depending on the product, and the content in the

manual is subject to change without prior notice to improve the performance.

An administration fee may be charged in the following situations:

(a) An engineer is called out at your request, but it is found that the product has no defect (i.e.,

where the user manual has not been read).

(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e.,

where the user manual has not been read).

You will be informed of the administration fee amount before a technician visits.

Table of contents

Preparations

Checking the Components 3

Ports 4

OM46N/OM55N 4

OM46N-D/OM55N-D 5

Anti-theft Lock 6

Before Installing the Product (Installation

Guide) 7

OM46N/OM55N 7

OM46N-D/OM55N-D 8

Installing the Wall Mount 11

Wall Mount Kit Specifications (VESA) 11

Specifications

General 12

Preset Timing Modes 13

Appendix

Licence 15

Preparations

Chapter 01

"Contact the vendor where you

purchased the product if any

components are missing.

"The appearance of the components

may differ from the images shown.

"A stand is not provided with the

product. To install a stand, you can

purchase one separately.

"Use either the back-side magnet or

the double-sided tape depending

on where you want to attach the

external ambient light sensor.

The warranty for adhesiveness of the

double-sided tape applies to rst-

time-use only.

"The external ambient light sensor is

marked with the label on the sensor

cable.

Checking the Components

Quick Setup Guide Warranty card

(Not available in some locations) Regulatory guide Power cord

Batteries (AAA x 2)

(Not available in some locations) Remote Control External ambient light sensor External IR cable

(OMN x 1 / OMN-D x 2)

Power IN rubber

(Supported model: OMN-D)

HOLDER-GUIDE x 2 / Screw (M3

x L6) x 4

(Supported model: OMN-D)

Top cover

(Supported model: OMN-D)

Ports

OM46N/OM55N

RS232C

OUT / IN

AUDIO OUT

IR IN

AMBIENT

SENSOR IN

USB

LAN OUT

LAN IN

HDMI 1 IN

HDMI 2 IN

DP IN

HDMI OUT

Stick the receiver of an external IR

cable to this location when the cable

is not used or the product is moved.

Air outlet

Air inlet

"The colour and shape of parts may differ from what is shown. Specifications are subject to change without

notice to improve quality.

Port Description

RS232C OUT

Connects to MDC using an RS232C adapter.

RS232C IN

AUDIO OUT

Outputs sound to an audio device via an audio cable.

IR IN

Connects to an external IR cable that receives signals from the remote control.

AMBIENT SENSOR IN

Used to supply power to the external sensor board and to receive signals from

the ambient light sensor.

USB ¨

Connect to a USB memory device.

LAN OUT

•Wired LAN connection port used to connect an external device such as a

laptop to connect to the Internet.

• Connects to MDC using a LAN cable. (10/100 Mbps)

LAN IN

Connects to MDC using a LAN cable. (10/100 Mbps)

HDMI 1 IN

Connects to a source device using a HDMI cable or HDMI-DVI cable.

HDMI 2 IN

DP IN

Connects to a PC using a DP cable.

HDMI OUT

Connects to another product using a HDMI cable.

OM46N-D/OM55N-D

Air inlet

Air outlet

"The colour and shape of parts may differ from what is shown. Specifications are subject to change without

notice to improve quality.

"Install this product for indoors only. Install the display labelled OUTDOOR in the direction of the window.

Port Description

RS232C IN

Connects to MDC using an RS232C adapter.

IR IN

Connects to an external IR cable that receives signals from the remote control.

USB ¨

Connect to a USB memory device.

HDMI IN

Connects to a source device using a HDMI cable or HDMI-DVI cable.

LAN

•Wired LAN connection port used to connect an external device such as a

laptop to connect to the Internet.

• Connects to MDC using a LAN cable. (10/100 Mbps)

AMBIENT SENSOR IN

Used to supply power to the external sensor board and to receive signals from

the ambient light sensor.

Setting up Device ID

OMN-D model has separate remote sensors on the front and back sides.

Depending on the distance from the remote control or other surrounding conditions, it is possible both front and

back displays respond to the remote control signal. You can assign IDs to displays (INDOOR: 1, OUTDOOR: 2) and

follow the steps below to restrict remote control to one selected display only.

"To reverse the remote controlled display after setting otherwise, first cancel the existing ID settings for the

INDOOR and OUTDOOR displays by pressing the UNSET button.

•To select the INDOOR display only

1) Position the remote control facing the INDOOR IR sensor and press SET → 1 → E on the control.

2) Position the remote control facing the OUTDOOR IR sensor and press SET → 1 → E on the control.

• To select the OUTDOOR display only

1) Position the remote control facing the INDOOR IR sensor and press SET → 2 → E on the control.

2) Position the remote control facing the OUTDOOR IR sensor and press SET → 2 → E on the control.

Anti-theft Lock

"An anti-theft lock allows you to use the product securely even in public places.

"The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.

"The following images are for reference only. Real-life situations may differ from what is shown in the images.

"Supported models: OMN

To lock an anti-theft locking device:

Fix the cable of your anti-theft locking device to a heavy object such as a desk.

Put one end of the cable through the loop on the other end.

Insert the locking device into the anti-theft lock slot at the back of the product.

Lock the locking device.

– An anti-theft locking device can be purchased separately.

– Refer to the user guide provided with your anti-theft locking device for details.

– Anti-theft locking devices can be purchased at electronics retailers or online.

Before Installing the Product (Installation

Guide)

To prevent injury, this apparatus must be securely attached to the floor/wall in accordance

with the installation instructions.

• Ensure that an authorised installation company installs the wall mount.

• Otherwise, it may fall and cause personal injury.

• Make sure to install the specified wall mount.

OM46N/OM55N

Tilting Angle and Rotation

"Contact Samsung Customer Service Centre for further details.

•The product can be tilted at a maximum angle of 15° from a perpendicular wall surface.

15°

"Do not use this model installed on a ceiling, floor, or table.

Ventilation

"Contact Samsung Customer Service Centre for further details.

Installation on a PerpendicularWall

AMinimum 60 mm

B Ambient temperature: Under 30 °C

"When installing the product on a perpendicularwall, allow at least

60 mm of space between the product and wall surface for ventilation

and ensure that the ambient A temperature is kept below 30 °C.

OM46N-D/OM55N-D

"Contact Samsung Customer Service Centre for further details.

"Do not install this product near machinery that works with oil (e.g. gas stations). Oil mist

may cause fans to malfunction.

"Do not use in Landscape mode for this model.

Ventilation

"Do not block the ventilation openings on the top and bottom sides.

ADistance from the show-window > 100 mm

BDistance from the ceiling > 300 mm

CDistance from the floor > 100 mm

DOperation temperature range: 0~30 ℃ (under direct sunlight)

Installing the top cover

Install HOLDER-GUIDE x 2.

Insert the power cord into the power IN rubber and

connect the power cord.

Connect cables, e.g. external IR cable, power cord,

HDMI cable, and organise them as shown in the

image.

Place the top cover.

Securely position the external IR cable and the

external ambient light sensor at the specified

location.

Removing handles

Remove the handles from both sides of the

product.

Place the screws back into the screw holes and

fasten them.

"Remove the screw caps found at the

marked locations before installing on

the ceiling or with the stand.

Precautions for enclosure unit installation

If you want to make additional enclosure surrounding OMN-D product, refer to the following

guides.

• There should be no glass in front and back of the Enclosure.

• Don’t block the top and bottom vents of OMN-D product.

• Open rate above 70% is recommended for Inlet/Outlet vent of Enclosure.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Digitale Beschilderung Handbücher

Samsung

Samsung PM32F Bedienungsanleitung

Samsung

Samsung QBR Series Bedienungsanleitung

Samsung

Samsung KMC-W Bedienungsanleitung

Samsung

Samsung DB22D Bedienungsanleitung

Samsung

Samsung IEA Series Bedienungsanleitung

Samsung

Samsung IFH Bedienungsanleitung

Samsung

Samsung QER Series Bedienungsanleitung

Samsung

Samsung ED55C Bedienungsanleitung

Samsung

Samsung XPR-E Series Bedienungsanleitung

Samsung

Samsung IFH Series Bedienungsanleitung

Samsung

Samsung QMR-T Series Bedienungsanleitung

Samsung

Samsung RM40D Bedienungsanleitung

Samsung

Samsung IWJ Series Bedienungsanleitung

Samsung

Samsung OH24B Bedienungsanleitung

Samsung

Samsung LH008IWRMWS/XU Bedienungsanleitung

Samsung

Samsung QM55F Bedienungsanleitung

Samsung

Samsung OH46B Bedienungsanleitung

Samsung

Samsung SMART-Signage PM F Series Bedienungsanleitung

Samsung

Samsung QBR Series Bedienungsanleitung

Samsung

Samsung OM32H Bedienungsanleitung

Samsung

Samsung PM55F-BC Bedienungsanleitung

Samsung

Samsung QBR Bedienungsanleitung

Samsung

Samsung Smart QBR Series Bedienungsanleitung

Samsung

Samsung OM46N Bedienungsanleitung

Beliebte Digitale Beschilderung Handbücher anderer Marken

LG 72WS70MS-B Bedienungsanleitung

LG 65SM5D Bedienungsanleitung

LG 55EW5TK-A.AUS Bedienungsanleitung

KeyWest Technology

KeyWest Technology BREEZE Bedienungsanleitung

XtendLan

XtendLan XL-DSP-183C Bedienungsanleitung

LG 47VL10 Bedienungsanleitung

LG WP400 Kurzanleitung

Dynascan

Dynascan DS861LR4 Bedienungsanleitung

Classic Exhibits

Classic Exhibits SEGUE DESIGNS MOD-1363 Bedienungsanleitung

LG 22XE1J Bedienungsanleitung

protech

protech KT-7290 Bedienungsanleitung

WebDT

WebDT 515A Montageanleitung

LG 55EJ5D Kurzanleitung

EVERI

EVERI Enrollment Kiosk Bedienungsanleitung

LG 75XS4G Bedienungsanleitung

LG 49UH7J Bedienungsanleitung

NCR

NCR SelfServ 90 Handbuch

LG 55EW5F Bedienungsanleitung