Samsung Scd-2080p Bedienungsanleitung

High Resolution Varifocal Dome Camera SCD-2080 User Guide

Before installing and operating this product,

please read this manual thoroughly.

ENGLISH

Before operating the camera, confirm the camera model and correct input power

voltage. To help you understand this manual thoroughly, we'll introduce our model

description.

n SCD-2080 SERIES

 •NTSCMODEL •PALMODEL

SCD-2080N SCD-2080P

nMODEL DESCRIPTION

 •SCD-2080X

 •SIGNALSYSTEM

NNTSCMODEL

PPALMODEL

This installation should be made by a qualified service person and

should conform to all local codes.

The lightning flash with an arrowhead symbol, within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous voltage”

within the product's enclosure that may be of sufficient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance (servicing) instructions

in the literature accompanying the appliance.

This equipment has been tested and found to comply with limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference

at his own expense.

WARNING-Changes or modifications not expressly approved by the

manufacturer could void the user's authority to operate the equipment.

WARNING-To prevent electric shock and risk of fire hazards:

◆

Do NOT use power sources other than that specified.

◆

Do NOT expose this appliance to rain or moisture.

SIGNALSYSTEM

COLOR DOME CAMERA User Guide

Contents

Contents Features

•

Features

………………………………………………………………………… 5

•

Precautions

…………………………………………………………………… 7

•

Components and Accessories

…………………………………………… 8

•

Overview

………………………………………………………………………… 9

•

Installation

……………………………………………………………………… 9

nInstallation

 



Adjustthepanning,tiltingandrotatingwhilewatchingthemonitor 

•

Connection

……………………………………………………………………… 13

nConnectingtoMonitor

  



nConnectingtoPower

 



nUsingCoaxialCommunications

 

•

Operating your Camera

…………………………………………………… 15

nMenuConfiguration

 



nMenuSetup

  



•LENS

 



•EXPOSURE

  



•WHITEBALANCE

  



•SSDR

 



•BACKLIGHT

 



•SSNR3

  



•DAY/NIGHT

  



•SPECIAL

  



•EXIT

  

•

Troubleshooting

……………………………………………………………… 31

•

Specification

…………………………………………………………………… 32

•

Dimension

……………………………………………………………………… 33

Excellent Sensitivity

The built-in high sensitivity COLOR CCD produces

a clear image.

- Color : 0.15Lux(50IRE, @F1.2), 0.0003LUX

(SENS-UP, x512)

- B/W : 0.001Lux(50IRE, @F1.2), 0.000002LUX

(SENS-UP, x512)

DAY&NIGHT(ICR)

This camera has a function that automatically

selects the mode that is appropriate for daytime

or night-time conditions.

The COLOR mode operates in daytime

conditions to provide optimum colors, and B/W

mode operates in night-time conditions to

enhance the definition of the image.

DIS (Digital Image Stabilizer)

The DIS function compensates for any camera

movement, to produce more stable pictures.

Communication

Coaxial communication methods are supported.

- Protocol : Pelco Coaxitron

Miscellaneous Functions

HLC(High Light Compensation), SENS-UP, FLIP

(H/V-REV), D-ZOOM, SHARPNESS and PRIVACY

functions are provided.

OSD

The camera’s OSD is complimented by 18 languages.

- NTSC : Korean, English, French, Spanish, Japanese,

Portuguese, Taiwanese

- PAL : English, Chinese, German, Italian, French,

Spanish, Russian, Czech, Polish, Romanian,

Serbian, Swedish, Danish, Turkish, Portuguese

SSNR3 (Samsung Super Noise

Reduction) Function

The high-performance W-V DSP chip effectively

removes low-light gain noise and afterimage to

provide clear images even in dark environments.

High Resolution

By adopting a diagonal 6mm(1/3") 410,000 (NTSC)

pixel, 470,000(PAL) pixel SONY CCD, the camera

produces clear picture quality with a horizontal

resolution of 600 TV lines in color and a horizontal

resolution of 700 TV lines in B/W mode.

SSDR

(Samsung Super Dynamic Range)

For images with high contrast between bright

and dark areas from difficult lighting

conditions such as backlighting, this camera

selectively illuminates darker areas while

retaining the same light level for brighter

areas to even out the overall brightness.

Motion Detection

Since the camera detects motion without any

additional external sensor, you can monitor

activity more efficient.

COLOR DOME CAMERA User Guide

SamsungTechwincaresfortheenvironmentatallproductmanufacturing

stages to preserve the environment, and is taking a number of steps to provide

customerswithmore environment-friendly products.The Ecomark represents

SamsungTechwin’swilltocreateenvironment-friendlyproducts,andindicates

thattheproductsatisfiestheEURoHSDirective.

This information is provided to ensure your safety and to prevent any losses, financial or

otherwise.Pleasereaditcarefullyandusetheproductaccordingly.

* For product inquiries, please contact the retail shop where you bought the camera. The use of equipment such as

anaerialladderwhileprovidingafter-salesserviceshallbeatyourexpense.

 *Separatethepowerplugduringathunderstorm.

 *Thisproductissupportequipmentforsurveillancesystem.Therefore,wecan'tcompensateformateriallossand/or

personalinjuriesbyrobbery,fire,naturaldisasterorothersuchevents.

Ignoringthisinformationmay

resultinmateriallossand/or

seriouspersonalinjuriesincluding

death.

Indicates“NeverAllowed.”

Ignoringthisinformationmay

resultinmateriallossand/ora

slightinjuries.

Indicates“NoDisassembling.”

Warnings & Cautions

Warning/Attention/Special Mark Messages

Do not install under extreme

temperature conditions.

Do not install in high humidity

environment.

The lens is the most important component of

the camera. Be careful not to smear it with

fingerprints.

Severe lighting changes or flickering may hinder

normal camera operation.

May lower image quality.Use only under temperature conditions between

-10ºC and +50ºC. Provide good ventilation when

using in high temperature conditions.

Avoid touching the camera lens.

Do not drop the camera or subject

it to physical shock.

May damage the CCD.May cause a product malfunction.

Never keep the camera face to

strong light directly.

Do not install under unstable

lighting conditions.

Precautions

COLOR DOME CAMERA User Guide

Overview

Precautions

•Exposuretoaspotlightoranobjectemittingstronglightmaycausesmearorblooming.

•Ensurethatthepowersourcecomplieswithnormalspecifications beforesupplyingitto

the camera.

Notes

Do not expose the camera to

radioactivity.

Do not expose the camera to rain

or other types of liquids.

❶ SCD-2080

2 InstructionManual

3 M4TappingScrew3EA

4 InstallationVideoOutputCable

❶

2 3

If exposed to radioactivity, the CCD will fail. May cause a product malfunction.Wipe dry any

liquids. Liquids may contain minerals that are

corrosive to electronic components.

Components and Accessories

❶Pan Base : Control panning angle of camera.

2Rotate Base : Control rotating angle of camera.

3x3.6 Vari-focal Lens Module 2.8 ~ 10.0mm (F1.2)

4Video Output Terminal to Monitor

Function Setup switch : Display the menu on the screen and move the cursor to four

directions to confirm status or after changing a selected item.

6Video Output Jack

7Power Input Terminal

8Dome Cover

9Shield Case

•Theinstallationshouldbedonebyqualifiedservicepersonnelorsysyteminstallers.

•Iftheceilingmaterialisnotstrongenoughtoholdtheinstallationscrews,thecamera

mayfalloff.Reinforcetheceilingasneeded.

Notes

Installation

9❶

COLOR DOME CAMERA User Guide

Anarrowforinstalling

directions

1) Separate the dome cover by turning anti-clockwise.

2) Separate the shield case by pulling from the camera body.

* To install the dome cover on the camera

body, turn the latches in locking direction

as shown in the figure 1.

Latch

Lockingdirection

[Figure1]

Lockingdirection

(Clockwise)

MainBody

(Camera)

ShieldCase

Domecover

Unlocking direction

(Anti-clockwise)

Installation

When using the Ceiling bracket

Installation

•The installation should be done by qualified

service personnel or system installers.

•Iftheceilingmaterialisnotstrongenoughto

hold the installation screws, the camera may

falloff.Reinforcetheceilingasneeded.

•Tochangethepositionofthecable,take

awaytheHoleCoverandpassthecable

through.

Notes

Originalpositionof

the cable

HoleCover

[Figure-2]

M4tapping

screw

PanBase

fixation

screw

Unlocking

direction

M4tapping

screw (provided)

Domecover

CAMERA

Locking

direction

Ceilingbracket

1) Hold the ceiling bracket (located where the arrow

points to) and separate it from the main body of

the camera by rotating it anti-clockwise.

(refer to the picture in 'Notes' on page 10)

2) Place the separated ceiling bracket so that the

“Front” side faces the area to be monitored and

install it with the M4 tapping screws.

3) To combine the main body with the ceiling bracket,

make sure that the pan base fixation screw face the

opposite side of the “Front” side of the ceiling

bracket and rotate it clockwise.

4)Adjust the camera lens to face the area to be

monitored and fix the main body and the dome

cover by aligning the grooves and rotating the

body clockwise.

•

Ifyouwanttoinstallthecamerawiththeceilingbracketcombined,fixitusingtwoM4tapping

screwsatthesideofthemainbody(refertothe[Figure-2]onpage11).

Notes

COLOR DOME CAMERA User Guide

1) You can adjust camera to any direction by using Pan,Tilt, Rotate mechanism.

 •PanBasemovesby176˚toeachsidedirectionand352˚onthewhole.

 •TiltBasecoverstotal73˚angle(0˚~73˚).

 •RotateBasemovesby174°toeachsidedirectionand348°onthewhole.

2) Methods of adjustment

 •The case of wall installation

1

After mounting the camera on a wall, adjusting the panning angle so that the camera can

face the direction to monitor when tilted.

2

Adjust the tilting angle by rotating the tilt base.

3

Loosen the rotate base hold screw and adjust rotate base for the best view.

4

Tighten the rotate base hold screw.

 •The case of ceiling installation

1

After mounting the camera on a ceiling, adjusting the panning angle to the correct viewing

position by rotating the pan base.

2

Adjust the tilting angle by rotating the tilt base.

3

Loosen the rotate base hold screw and adjust rotate base for the best view.

4

Tighten the rotate base hold screw.

Adjust the panning and tilting, rotating while watching the monitor

Installation

Connect the Video Output jack to the VIDEO-IN jack of monitor.

CCTVCamera Monitor

• As the connecting method varies with the instruments, refer to the manual supplied with the

instrument.

• If necessary, you can connect the monitor to the REMOTE jack on the back of your camera.

• Only connect the cable when the power is turned off.

Connect the adaptor to the power input terminal as shown in the figure below. The

recommended adaptor specification for SCD-2080N/SCD-2080P is DC 12V / 500mA or AC 24V

/ 300mA.

Connection

Connecting to Monitor

Connecting to Power

73˚

174˚

176˚

Pan Base

Tilt Base

Rotate Base

----PowerInputTerminal

• As shown in the table above, voltage decreases as the wire gets longer. Therefore

use of an excessively long adaptor output line for connection to the camera may

affect the performance of the camera.

*Standard voltage for camera operation : DC 12V ± 10%, AC 24V ±10%

There may be some deviation in voltage drop depending on the type of wire and the manufacturer.

When the resistance value of copper wire is at [20˚C(68˚F)]

Copper wire size (AWG)

#24(0.22mm2)#22(0.33mm2)#20(0.52mm2)#18(0.83mm2)

Resistance (Ω/m)

0.078 0.050 0.030 0.018

Voltage Drop (V/m)

0.028 0.018 0.011 0.006

COLOR DOME CAMERA User Guide

Operating Your Camera

•Besuretoconnectpoweronlyafteralltheinstallationiscomplete.

•NotethatAC/DCadaptorisnotsuppliedwithcamera.

•GroundshouldbeconnectedtotheGNDterminal.

Notes Menu Configuration

Connection

MAIN SETUP

LENS

DC



EXPOSURE

BRIGHTNESS



SHUTTER



AGC



SENS-UP RETURN

WHITE BAL

ATW



OUTDOOR



INDOOR



MANUAL



AWC→SET

SSDR

OFF



ON

BACKLIGHT

OFF



BLC



HLC

SSNR3

OFF



ON

DAY/NIGHT

COLOR



B/W



AUTO

SPECIAL

IMAGE ADJ



MONITOR



CAM TITLE



SYNC MOTION DET



PRIVACY



DIS



LANGUAGE



RETURN

EXIT

SAVE



NOT SAVE



RESET

• Coaxial Communications System

• OSD Control method

Using Coaxial Communications

Distance Recommended Cable Specification

300m 3C2V(RG-59/U)

450m 5C2V(RG-6/U)

600m 7C2V(RG-11/U)

• Video Cable

The camera's video output port is connected to the monitor with a BNC coaxial

cable, shown below : If the distance between the camera and the monitor

exceeds the recommended maximum, please use an auxiliary video amp.

•Itisrecommendedthatpurecoppercoaxcableisusedandnotcoppercoated

steel, as this will cause issues with the communication over the coaxial cable.

Notes

CAMERA DVR CONTROLLER

SET MENU/ENTER OSD KEY

UP UP KEY JOYSTICK UP

DOWN DOWN KEY JOYSTICK DOWN

LEFT LEFT KEY JOYSTICK LEFT

RIGHT RIGHT KEY JOYSTICK RIGHT

DVD

DVR

• :BNC

•---- :RS-485

COLOR DOME CAMERA User Guide

Operating Your Camera

Use the Function Setup switch within the camera.

Function Setup switch

Menu Setup

2. Select a desired function using the Function Setup switch.

 •Placethecursoroveradesireditem.

3. Set up a selected item by using the Function Setup switch.

4.To finish the setting, select ‘EXIT’ and press the Function Setup switch.

•Anitemwiththe icon also has sub menus. To select a sub menu, select an item with

theiconandpresstheFunctionSetupswitch.

•Anitemwiththe---iconisunavailableduetofunctionsettings.

Notes

MAIN SETUP

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

4.SSDR OFF

5.BACKLIGHT OFF

6.SSNR3 ON

7.DAY/NIGHT AUTO

8.SPECIAL

9.EXIT SAVE

Selectthefunctionusing

theFunctionSetupswitch.

Changethestatususing

theFunctionSetupswitch.

1. Press the Function Setup switch.

 •Mainsetupmenuisdisplayedonthemonitorscreen.

Using this function, you can control the screen brightness.

1.When the SETUP menu screen is displayed, selectLENSby using the Function

Setup switch so that the arrow indicatesLENS.

LENS

MAIN SETUP

1.LENS DC

2.EXPOSURE

2.The Lens mode has sub menu site as listed below.

- BRIGHTNESS :Adjusts the video brightness.

- FOCUS ADJ : To adjust the lens focus correctly, you must activate the Focus Settings

mode. To activate the Focus Settings mode, adjust the lens focus, and then deactivate

the settings mode.

- You can adjust the shutter value of ESC shutter mode.

MAIN SETUP

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

EXPOSURE

1.When the SETUP menu screen is displayed, select 'EXPOSURE’ by using the Function

Setup switch so that the arrow indicates 'EXPOSURE’.

2. Select a desired mode using the Function Setup switch.

BRIGHTNESS : Adjusts the video brightness.

COLOR DOME CAMERA User Guide

Operating Your Camera

EXPOSURE SETUP

1.BRIGHTNESS 25

2.SHUTTER ---

3.AGC HIGH

4.SENS-UP OFF

5.RETURN

SHUTTER :You can select the shutter.

- A.FLK : Select this when you experience picture flicker, this happens when there

is a clash with the installed lighting frequency.

- ESC : Select this to control the shutter speed automatically. If ESC is selected,

the shutter speed is automatically controlled depending on the ambient

illumination of the subject.

- MANUAL : You can control shutter speed manually.

(NTSCMODEL:1/60~1/120,000,PALMODEL:1/50~1/120,000)

- --- : Shutter speed is fixed at 1/60sec(1/50sec).

AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but

the greater the noise.

- OFF : Deactivates the AGC function.

- LOW :Allows automatic gain control from 5.3dB to 32dB.

- HIGH : Allows automatic gain control from 5.3dB to 37dB.

SENS-UP :When it is night or dark, the camera automatically detects the light level

and maintains a clear picture if this mode is activated.

- OFF : Deactivates the SENS-UP function.

- AUTO :Activates the SENS-UP function.

•Settheshuttermodeto---ifcolorrollingoccurs.

•Whenthe SHUTTER isset toESC afterselecting theInternalSynchronizationType,the

picture may become unstable if the camera faces a bright fluorescent light. Therefore,

take care when choosing the installation position.

•WhentheSHUTTERissettoMANUALorA.FLKmode,SENS-UPwillbedisabled.

Notes

•If you set the Function Setup switch to ‘AUTO’ mode,You can adjust the brightness by

increasingordecreasingtheshutterspeed.(x2~x512)

•Notethatthehigherthezoomlevel,thebrighterthescreen,butthemorelikelyitisthatan

after-imagewillappear.

•AlthoughNoise,Spots,andWhitishsymptomsmayoccurinSENS-UPoperationwhenthe

zoomlevelisincreased,thisisnormal.

Notes

RETURN : Select this to save the changes in the EXPOSURE menu and return to the

SETUP menu.

Use the White Balance function to adjust the screen color.

1.When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function

Setup switch so that the arrow indicates ‘White Bal’ .

2. Select a desired mode using the Function Setup switch.

White Bal (White Balance)

MAIN SETUP

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

4.SSDR OFF

Select one of the following 5 modes, as appropriate for your purpose.

ATW : Select this when the color temperature is between 1,700˚K and

11,000˚K.

OUTDOOR : Select this when the color temperature is between 1,700˚K and

11,000˚K. (sodium light inclusion)

INDOOR : Select this when the color temperature is between 4,500˚K and

8,500˚K.

MANUAL : Select this to fine-tune White Balance manually. Set White Balance

first by using the ATW or AWC mode.After that switch to MANUAL

mode, fine-tune the White Balance and the Function Setup switch.

Inhaltsverzeichnis

Andere Samsung Dome-Kamera Handbücher

Samsung

Samsung SCP-3371/SCP-3371H Bedienungsanleitung

Beliebte Dome-Kamera Handbücher anderer Marken

ACTi

ACTi E89 Bedienungsanleitung

Axis

Axis P5414-E PTZ Bedienungsanleitung

Avigilon

Avigilon 1.0-H3-DO1 Bedienungsanleitung

Zavio

Zavio D4220 Bedienungsanleitung

Lilin

Lilin SP9264 Bedienungsanleitung

Bosch

Bosch EX40N Bedienungsanleitung

Vivotek

Vivotek FE9182-H Bedienungsanleitung

Zavio

Zavio P8220 Bedienungsanleitung

Eneo

Eneo TVD-1080V2812IR Bedienungsanleitung

Bosch

Bosch FLEXIDOME IP 7000 VR Bedienungsanleitung

Golbong

Golbong 2252-23 Technisches Datenblatt

DW Snapit DWC-V4367WD Bedienungsanleitung

Vivotek

Vivotek SD9161-H Bedienungsanleitung

ALIBI

ALIBI ALI-NS1014VR Bedienungsanleitung

Onvif

Onvif IPMV3FI Bedienungsanleitung

Riva

Riva RC3502SV-7311 Bedienungsanleitung

Zavio

Zavio P6210 Bedienungsanleitung

Arecont Vision

Arecont Vision AV1555DN-F Bedienungsanleitung

Samsung scd-2080p Bedienungsanleitung

Beliebte Dome-Kamera Handbücher anderer Marken