Samsung SF-515 Bedienungsanleitung
Advanced
fax
4
4.1
Advanced fax
Broadcasting
Use this feature to send your documents to multiple locations. After send-
ing, the documents are automatically erased from the memory.
1. Load the document face down. If necessary, adjust Resolution, or
Contrast. For details, see page 3.2.
2. Press Advanced FAX on the control panel.
The display shows the first menu BROADCASTING.
3. Press Start/Enter to access the broadcasting menu.
4. Enter the number of the remote machine using the number keypad.
To enter the number, you can also press a one-touch button including
group dial button. Otherwise, press Speed, enter a 2-digit speed dial
number, then press Start/Enter. The stored number appears on the dis-
play.
5. Press Start/Enter to confirm the number. The display asks you to
enter another fax number to send the document to another location.
. Enter another fax number using the number keypad, one-touch dial,
or 2-digit speed dial number. Note that you cannot use group dial
numbers for another fax number.
The number appears on the display. Press Start/Enter to confirm the
number.
Or
To send to one location or when you complete the last fax number
setting, press Start/Enter.
7. The document will be scanned into the memory before transmission.
The display shows the memory capacity and the number of pages
being stored in the memory, then the machine begins sending the docu-
ment in order of the numbers you entered.
4.2 Advanced fax
Delayed fax
You can set your machine to send a fax at a later time when you will not
be present.
1. Load the document face down. If necessary, adjust Resolution, or
Contrast. For details, see page 3.2.
2. Press Advanced FAX on the control panel.
The display shows the first menu BROADCASTING.
3. Press ➛➛or ❿❿until ‘DELAYED FAX’ appears, then press Start/Enter.
4. Enter the number of the remote machine, then press Start/Enter.
To enter the number, you can also press a one-touch button including
Group dial button. Otherwise, press Speed, enter a 2-digit speed dial
number, then press Start/Enter. The stored number appears on the
display.
5. Press Start/Enter to confirm the number. The display asks you to
enter another fax number to send the document to another location.
Note: If ‘MEMORY FULL’ occurs while scanning into the memory, the dis lay
will show:
Press
➛
or
❿
to select the o tion you want. If you select CANCEL,
broadcasting is cancelled. If you select DONE, your machine erforms
broadcasting only with the ages already scanned.
If an error occurs while sending to a s ecific number, the machine trans-
mits the document to all the other numbers, then retries the number that
reviously recorded an error. After com leting transmission, your machine
rints the multi-communication re ort.
JOB
❿❿
CANCEL
❿❿
DONE
4.3
Advanced fax
. If you want to send to more than one location, enter another fax
number using the number keypad, one-touch dial, or 2-digit speed
dial number. Note that you cannot use group dial numbers for another
fax number.
The number appears on the display. Press Start/Enter to confirm the
number.
Or
To send to one location or when you complete the last fax number
setting, press Start/Enter.
7. The display asks you to enter a name. If you want to assign a name to
the transmission, enter the name. If not, skip over this step.
For details on how to enter the name using the number keypad, see
page 2.3.
8. Press Start/Enter. The display shows the current time and asks you to
enter the time when the fax is to be sent.
9. Enter the time by using the number keypad, then press Start/Enter.
Enter the time in 24-hour format. For example, enter 2230 for 10:30 P.M.
If you set a time earlier than the current time, the document will be
sent at that time on the following day.
10. The document will be scanned into the memory before transmission.
The display shows the memory capacity and the number of pages
being stored in the memory.
11. The machine returns to standby mode and the display alternates
between messages to remind you that you are in standby mode and
that delayed transmission is set.
Note: If you want to cancel the delayed fax, see ‘Cancelling a scheduled
o eration’ on age 4.7.
TIME(13:30)13:30
4.4 Advanced fax
Priority fax
When the priority fax is enabled, a high priority document can be trans-
mitted ahead of reserved operations. The document is scanned into the
memory, then transmitted when the current operation is concluded. In
addition, a priority transmission will interrupt a broadcast operation
between stations (i.e., when transmission to station A ends, before trans-
mission to station B begins) or between redial attempts.
1. Load the document face down. If necessary, adjust Resolution, or
Contrast. For details, see page 3.2.
2. Press Advanced FAX on the control panel.
The display shows the first menu BROADCASTING.
3. Press ➛➛or ❿❿until ‘PRIORITY FAX’ appears, then press Start/Enter.
4. Enter the number of the remote machine, then press Start/Enter.
To enter the number you can also press a one-touch button including
group dial button. Otherwise, press Speed, enter a 2-digit speed dial
number, then press Start/Enter. The stored number appears on the
display.
5. Press Start/Enter to confirm the number. The display asks you to
enter a name.
. If you want to assign a name to the transmission, enter the name. If
not, skip over this step.
For details on how to enter a name using the number keypad,
see page 2.3.
7. Press Start/Enter.The document will be scanned into the memory
before transmission. The display shows the memory capacity and the
number of pages being stored in the memory.
8. The machine shows the number being dialled, then begins sending the
document.
4.5
Advanced fax
Polling
What is polling?
Polling is used when one fax machine requests another to send a docu-
ment. This is useful when the person with the original document to be sent
is not in the office. The person who wants to receive the document calls the
machine holding the original and requests that the document be sent. In
other words, it “polls” the machine holding the original.
Send polling
You can programme your fax machine to send documents in your
absence when polled by a remote fax machine. It is possible to use a poll
code to prevent unauthorized polling of your fax machine. When you
secure your machine in this manner, only those who know the poll code
can poll your machine.
1. Load the document face down. If necessary, use Resolution, or
Contrast. For details, see page 3.2.
2. Press Advanced FAX on the control panel.
The display shows the first menu BROADCASTING.
3. Press ➛➛or ❿❿until ‘SEND POLLING’ appears, and press Start/Enter.
4. The display asks you to enter a 4-digit poll code. The poll code is preset
to 0000 at the factory, which represents no poll code.
5. If you want to use a poll code, enter the 4-digit code (except for 0000),
then press Start/Enter. Or
If you do not want to secure the transmission with a poll code, press
Start/Enter when the display shows 0000 for the poll code, or press
0000.
6. The display asks you to store the document in the machine’s bulletin
memory.
If you store the document in the bulletin board memory, more than one
remote station can poll that document from your machine. If not, the
document will be automatically erased after being polled by a remote
machine.
Press ➛➛or ❿❿to select YES or NO.
POLLCODE [0000]
4.6 Advanced fax
7. The machine stores the document in the memory. The display counts
the number of pages being stored in the memory and the memory
capacity remaining.
The machine returns to standby mode and the display shows a
reminder that a send polling is set. The machine automatically
switches to FAX mode (automatic receiving) when set to be polled.
Receive polling
You can set your machine to automatically receive documents from
one or more unattended remote fax machines. This feature permits
unattended polling in the evening hours when telephone rates are lower.
Note: The remote machine must be ready for olling.
1. Call the remote fax machine.
2. When you hear the fax tone, press Advanced FAX. The display shows
‘RECEIVE POLLING?’.
3. Press Start/Enter. The display asks you to enter a 4-digit code. Poll
code ‘0000’ represents no code.
4. If the remote machine is secured with a poll code, you must enter
the correct code, and press Start/Enter.
Or
If the remote machine is not secured with a poll code, press
Start/Enter to accept [0000] which represents no code.
5. The machine begins to receive polling.
Note:
• If you want to cancel the o eration, ress Stop at any time.
• Not all fax machines have olling ca ability, and olling incom atibility
sometimes occurs between fax machines from different manufacturers.
POLLCODE [0000]
4.7
Advanced fax
Cancelling a scheduled operation
1. Press Advanced FAX on the control panel.
The display shows the first menu BROADCASTING.
2. Press ➛➛or ❿❿until you find ‘CANCEL SCHEDULE’, then
press Start/Enter.
3. Press ➛➛or ❿❿repeatedly until you find the operation you want to
cancel, then press Start/Enter. The display asks you to confirm your
selection.
4. Press Start/Enter to cancel the operation.
Adding documents to a scheduled operation
You can add documents to the delayed transmission previously reserved
in your machine’s memory.
1. Load the document face down. If necessary, adjust Resolution, or
Contrast. For details, see page 3.2.
2. Press Advanced FAX on the control panel.
The display shows the first menu BROADCASTING.
3. Press ➛➛or ❿❿until ‘ADD SCHEDULE’ appears, then press
Start/Enter. The display shows the operation, time and number
currently reserved in the memory.
4. Press ➛➛or ❿❿repeatedly until you find the operation to which you
want to add documents, then press Start/Enter.
The machine automatically stores the documents in the memory, and
the display shows the memory capacity and the number of pages.
5. After storing, the machine displays the number of total pages, then
returns to standby mode.
Additional
features
5
5.1
Additional features
Printing reports
Your machine can print reports containing useful information – Schedule
Job, System Data, etc. The following reports are available:
Help List
This list shows the machine s basic functions and commands to use as a
quick reference guide.
Sent Journal
This report shows information concerning transmission activities recently
made.
Received Journal
This report shows information concerning reception activities recently
made.
Phonebook List
This list shows all of the numbers currently stored in the machine s
memory as one-touch dial numbers, speed dial numbers, and group dial
numbers.
Sending Confirmation
This report shows the fax number, the number of pages, elapsed time of
the operation, the communication mode, and the communication results.
You can set up your machine to print the message confirmation report in
one of the following ways (see page 5.3):
• Automatically after each transmission (ON)
• Automatically only if an error occurs during transmission (ERR)
• No report printed at all (OFF). You can print this report manually at
any time you want.
Schedule Information
This list shows the document currently stored for delayed transmission,
priority transmission, broadcasting, and send polling. The list shows the
starting time, type of operation, etc.
System Data List
This list shows the status of the user-selectable options. After you change
any setting, print this list to confirm your changes.
ulti-Communication Report
This report is printed automatically after sending documents to or receiv-
ing documents from more than one location.
Power Failure Report
This report is printed automatically when power is restored after a power
failure. This report shows data (if any) erased by the power failure.
Andere Handbücher für SF-515
4
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Samsung Faxgerät Handbücher
Samsung
Samsung SF 5100 Technisches Handbuch
Samsung
Samsung SF-4300 Bedienungsanleitung
Samsung
Samsung SF-5100P Bedienungsanleitung
Samsung
Samsung SF-340 Bedienungsanleitung
Samsung
Samsung FX100 Handbuch
Samsung
Samsung SF-350 Bedienungsanleitung
Samsung
Samsung SF-650 Series Bedienungsanleitung
Samsung
Samsung FX 505 Handbuch
Samsung
Samsung Msys 730 Bedienungsanleitung
Samsung
Samsung SF-750 Bedienungsanleitung
Samsung
Samsung SCX-FAX100 Bedienungsanleitung
Samsung
Samsung SF3000 Bedienungsanleitung
Samsung
Samsung SF-360 Series Bedienungsanleitung
Samsung
Samsung SF-370 Series Bedienungsanleitung
Samsung
Samsung SF-760P Bedienungsanleitung
Samsung
Samsung SF-530 Series Bedienungsanleitung
Samsung
Samsung SF-515 Bedienungsanleitung
Samsung
Samsung SF-650 Series Benutzerhandbuch
Samsung
Samsung SF-530 Series Bedienungsanleitung
Samsung
Samsung SF531P - B/W Laser - All-in-One Bedienungsanleitung
