Samsung MIM-B18N Bedienungsanleitung

uhzhtptTiX_us~GnptluWZ^YWhOXPUGGG^Y YWXZTW[TY\GGG㝘㤸GXWaX]aZ^

+S\-YXNS^SYXO\

installation manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please

www.samsung.com/register

DB68-03720A(1)

LonWorksGateway

MIM-B18N

This manual is made with 100% recycled paper.

uhzhtptTiX_us~GnptluWZ^YWhOXPUGGG^Z YWXZTW[TY\GGG㝘㤸GXWaX]aZ^

E-2

Safety Precautions

XRead carefully this installation manual before

installation and check if the LonWorks Gateway is

installed correctly after installation.

XDo not attempt to install or repair this LonWorks Gateway

by yourself.

XThis LonWorks Gateway contains no user-serviceable

parts. Always consult authorized service personnel for

repairs.

XWhen moving, consult authorized service personnel for

disconnection and installation of the LonWorks Gateway.

XEnsure that the wall is strong enough to support the

weight of the LonWorks Gateway.

XMust install the LonWorks Gateway with rated power

supply.

XThe LonWorks Gateway must be installed according to

the national electrical rules by an installation specialist.

XIf you wish to uninstall the LonWorks Gateway, consult an

authorized installation center.

WARNING

CAUTION XDo not use inflammable gases near the LonWorks

Gateway.

XDo not install the LonWorks Gateway in a location where

it will come into contact with combustible gases,

machine oil, sulphide gas, etc.

XAvoid locations where acid/alkali solution or special

spray is used.

XChoose a location that is dry and sunny, but not exposed

to direct sunlight. Suitable temperature is between

0°C(32°F) and 39°C(102.2°F).

XDo not spill water into the LonWorks Gateway.

XDo not apply tensile strength to the cable to avoid cable

damage.

XDo not press the buttons with a sharp object.

XDo not connect the power cable to the control terminal.

XIf the LonWorks Gateway is installed in a hospital or

other special places, it should not affect other electronic

devices.

This installation manual describes how to install the LonWorks Gateway. For installation

of other optional accessories, refer to the appropriate installation manual.



LonWorks, LONand Lontalkare registered trademarks of

Echelon Corporation.

uhzhtptTiX_us~GnptluWZ^YWhOXPUGGGY YWXZTW[TY\GGG㝘㤸GXWaX]aX_

E-3

Contents

XSAFETY PRECAUTIONS .......................................................... 2

XBEFORE INSTALLING THE LONWORKS GATEWAY ......................... 4

XACCESSORIES ...................................................................... 5

XVIEWING THE PARTS ............................................................ 6

XPRODUCT DIMENSIONS ......................................................... 8

XSYSTEM ARCHITECTURE ........................................................ 9

XCOMPATIBLE DEVICES ....................................................... 10

XINSTALLING THE LONWORKS GATEWAY ................................. 12

XSETTING THE LONWORKS GATEWAY ..................................... 20

XREADING EHP WATT-HOUR METER ..................................... 25

XSYSTEM SETTING INITIALIZATION .......................................... 30

XSYSTEM ENVIRONMENT SETTING .......................................... 31

XTRACKING ....................................................................... 44

XDEVICE CONFIGURATION .................................................... 50

XOVERVIEW FOR FUNCTION .................................................. 56

XNETWORK PARAMETER CHART ............................................ 58

XMESSAGE DEFINITION ....................................................... 60

uhzhtptTiX_us~GnptluWZ^YWhOXPUGGGZ YWXZTW[TY\GGG㝘㤸GXWaX]aX_

E-4

Checks before installation

1LonWorks Gateway IP

XA public IP is needed to access the LonWorks Gateway

over the internet.

(One public IP is needed for each LonWorks Gateway)

XA private IP may be used if the LonWorks Gateway need

not be accessed over the internet.

2Network related equipments

3Installation connection wire

XThe LAN cable and the communication cables from

centralized controllers/interface modules must be

installed in such a way that the wires can be connected

to the LonWorks Gateway with ease.

Note XThe LonWorks Gateway is a server and supports

static IP. To access the LonWorks Gateway through the

internet or with BMS System, the LonWorks Gateway

address, which is the IP address, must be known.

XA static IP service from an internet service provider

must be used if xDSL (ADSL, VDSL) is being used for

internet connection. (Static IP costs more than dynamic

IP.)

Before Installing the LonWorks Gateway

uhzhtptTiX_us~GnptluWZ^YWhOXPUGGG[ YWXZTW[TY\GGG㝘㤸GXWaX]aX_

E-5

Item LonWorks

Gateway

Quantity 1

Shape

Adapter Power cable M4x16 Screw

User’s manual Installation

manual Cable tie

111

Make sure you have each item. Supplied items may vary depending on your

country or service provider.

Accessories

The LonWorks Gateway must be installed by a trained

installer.

Ensure the main power is turned oﬀ before installing

the LonWorks Gateway.

XBe sure to use adapter and power cable we provide.

The power cable and the communication cable must

be installed according to the national electrical wiring

regulations.

uhzhtptTiX_us~GnptluWZ^YWhOXPUGGG\ YWXZTW[TY\GGG㝘㤸GXWaX]aX`

E-6

LonWorks Gateway Exterior

LCD Display

Shows current time and IP address. Various

messages will be displayed depending on

button input.

LCD operation button

There are 4 buttons(Menu, T(Down), S(Up),

Set) and you can access to menu and move,

check the menu.

LED Indicator

Check 15 LED status such as Power, CPU-Alive,

Ethernet-Linked/Active, COM1~4-TX/RX,

Lon ACK, Lon SVC and Check.

LonWorks Gateway Bottom cover

Unfasten 2 screws on the bottom and

separate the bottom cover from LonWorks

Gateway. Then check cable connection part.

Item Name Status

Power Power indicator Turns blue when the power is supplied.

CPU Alive CPU operation indicator Blinks in orange with 1 second intervals

during normal operation.

Ethernet–

Linked Internet connection indicator Turns green during normal connection.

Ethernet–

Active

Internet data transmission/reception

indicator

Blinks in orange during normal

transmission/reception.

COM1~4 – TX Channel 1~4 OnOﬀ controller/Outdoor unit

Data transmission Indicator

Blinks in green during normal

transmission.

COM1~4 – RX Channel 1~4 OnOﬀ controller/Outdoor unit

Data reception Indicator Blinks in green during normal reception.

Lon ACK LonWorks data reception indicator Blinks in green during normal reception.

Lon SVC LonWorks device status indicator

Blinks in green during un-conﬁgured.

- Needs commission by integration

tool (Ex. LonMaker)

Check Indoor/Outdoor unit/Communication check

Indicator Turns green when notice occurs.

LED Indicator

Viewing the Parts

Main Parts

uhzhtptTiX_us~GnptluWZ^YWhOXPUGGG] YWXZTW[TY\GGG㝘㤸GXWaX]aX`

E-7

Name Description

DI Terminal1 Digital Input connection terminal, Channel1~Channel5

DI Terminal2 Digital Input connection terminal, Channel6~Channel10

DO Terminal3 Digital Output connection terminal, Channel1~Channel5

DO Terminal4 Digital Output connection terminal, Channel6~Channel8

Lon Terminal

Terminal Block for LonWorks communication (TP/FT-10)

Reset Button

Reset LonWorks Gateway

Power Terminal

Connect LonWorks Gateway

adapter

Serial Terminal Service agent checks LonWorks Gateway error status using this terminal

SD card socket

Sub memory (for program update and set information saving) socket

RS485

Communication

Terminal

Connect for RS485 communication with devices such as OnOﬀ

controller/Interface module

-COM1 ~ COM5

Ethernet Terminal Connect LAN cable

Cable tie groove Groove for arranging cables

Cable tie groove

Reserved

SD Card Socket

Serial Terminal

Power Terminal

Reset Button

DI Terminal1 DI Terminal2 DO Terminal3 DO Terminal4

Ethernet Terminal

RS485 Communication Terminal

LonWorks Gateway Cable Connection Part

Lon Terminal

uhzhtptTiX_us~GnptluWZ^YWhOXPUGGG^ YWXZTW[TY\GGG㝘㤸GXWaX]aX`

E-8

240

255

64.80 (Unit : mm)

Display Board

40-pin Cable

20-pin Cable

Main Board

LonWorks Board

10-pin Cable

2-pin Cable

Sub Board

LonWorks Gateway Interior

Main Parts

Viewing the Parts (Continued)

Note If you need external circuit configuration, consult with the manufacturer.

Product Dimensions

uhzhtptTiX_us~GnptluWZ^YWhOXPUGGG_ YWXZTW[TY\GGG㝘㤸GXWaX]aYX

E-9

OConnecting outdoor units and LonWorks Gateway

- You can control up to 80 outdoor units and 128 indoor units using LonWorks Gateway.

*Each communication channel of LonWorks Gateway can be connected with 16 outdoor units.

- The more outdoor units are connected, the longer time takes for tracking.

System Architecture

For the devices which support new communication, set the communication channel

mode on '[System setting]-[Tracking]' menu as 'NEW' and for SIM/PIM which conventional

communication is applied, set the communication channel mode as 'IM'. You cannot

connect indoor & outdoor unit SET which conventional communication is applied to new

communication LonWorks Gateway.

When setting communication channel mode as 'NEW', the address of virtual OnOﬀ control

will be assigned.

Channel 0: Virtual OnOﬀ controller 11, Channel 1: Virtual OnOﬀ controller 12,

Channel 2: Virtual OnOﬀ controller 13, Channel 4: Virtual OnOﬀ controller 14,

Channel 5: Virtual OnOﬀ controller 15

OnOff

controller

Outdoor

Unit

RS 485

LonWorks Gateway

Internet

BMS system

BMS Engineering

SAMSUNG Engineering

Max 128 Indoor units

(DVM Series)

uhzhtptTiX_us~GnptluWZ^YWhOXPUGGG` YWXZTW[TY\GGG㝘㤸GXWaX]aYY

Inhaltsverzeichnis

Andere Samsung Tor Handbücher

Samsung

Samsung WEC8500 Bedienungsanleitung

Samsung

Samsung LCD 24B Bedienungsanleitung

Samsung

Samsung OFFICESERV 7100 Bedienungsanleitung

Samsung

Samsung DCS Bedienungsanleitung

Samsung

Samsung DRGW Bedienungsanleitung

Samsung

Samsung OFFICESERV 7100 Bedienungs- und Montageanleitung

Samsung

Samsung MIM-B17 Bedienungsanleitung

Samsung

Samsung GX-MC990CL Bedienungsanleitung

Samsung

Samsung IPX-G5X0 series Bedienungsanleitung

Samsung

Samsung SMG-400 Bedienungsanleitung

Samsung

Samsung GT-B1110 Bedienungsanleitung

Samsung

Samsung WMG160 Bedienungsanleitung

Samsung

Samsung SGH-Z810 Bedienungsanleitung

Samsung

Samsung Ubigate iBG3026 Bedienungsanleitung

Samsung

Samsung MIM-B18 Bedienungsanleitung

Samsung

Samsung HHG-3004H2 Bedienungsanleitung

Samsung

Samsung MIM-D00A Bedienungsanleitung

Samsung

Samsung BACnet Gateway MIM-B17N Bedienungsanleitung

Samsung

Samsung SSA-S3010 Bedienungsanleitung

Samsung

Samsung GX-MC990CL Bedienungsanleitung

Samsung

Samsung OFFICESERV 7100 Bedienungsanleitung

Samsung

Samsung SMG-3200 Bedienungsanleitung

Samsung

Samsung WMG100 Bedienungsanleitung

Samsung

Samsung MIM-B17C Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung