Samsung LN37A530P1F Bedienungsanleitung
1
Samsung TV
F/W Upgrade Guide
Samsung Electronics
LN37A530P1F, LN40A530P1F,
LN46A530P1F, LN52A530P1F
L530
Model CodeSeries (L5)
2
Notice: Please read completely prior to upgrade
¾There are two separate firmware packages required to
complete the upgrading process of the L5 series:
Version 1007.0 or higher for the main processor
L530 firmware 1007.0.exe
Version 1008.0 for the sub processor
L530 firmware 1008.0.exe
¾First determine what the current firmware version is for the
main processor (see below). If the version is 1007.0 or higher
proceed to Step 2 and upgrade the sub processor with 1008.0.
¾How to check the firmware version
User Menu -> Setup -> SW Upgrade
When highlighted the “SW Upgrade”, press the “Info” button on Remote
TV F/W Version : XXXX
3
Step1. Upgrade the firmware version 1007.0
2. Connect the USB Memory Drive
to the USB port of your PC.
Copy the file into the USB Memory Drive.
3. Go to the USB Memory Drive and then double click the file
L530 firmware 1007.0.exe.
1. Save the firmware file onto your computer.
File : L530 firmware 1007.0.exe
4. Press “Unzip” button. 5. Unzipping is in progress.
6. After completing, press
“OK” and “Close” button.
7. The USB driver should contain one folder
named ‘T-PRLAUS’
8. Safely disconnect the USB memory drive
by right clicking the green check mark
on the taskbar and then left click
“Safely Remove”.
4
9. Turn your TV on, and then insert
the USB Memory Drive containing
the firmware upgrade into the
WISELINK port at the Side-AV panel.
NOTE: If you get the “WiseLink” on-
screen selection menu, select “NO”
※Important
If the firmware version you downloaded from the Samsung website
or received from Samsung is older than or has smaller version
number than the version on your TV, do not install it.
10. Press the Menu button on your
Remote Control.
11. Go to Setup.
On the Setup Menu,
select SW Upgrade, and then
press Enter or the arrow button
(▶) on your remote.
12. The TV will scan the USB Memory
Drive.
5
13. When the software upgrade is
complete; the TV will turn off and
then back on by itself.
Proceed with the ‘Plug & Play’
setup.
14. Once ‘Plug & Play’ is complete;
“Enjoy your watching.” is displayed.
Press the ‘Enter’ key and you are
done.
You can find more information in
User Manual.
※Do not pull the USB drive out and
unplug the power cable until
complete
※Important
If the firmware version you downloaded from the Samsung website
or received from Samsung is older than or has smaller version
number than the version on your TV, do not install it.
6
Step2. Upgrade the firmware version 1008.0
3. Connect the USB Memory Drive
to the USB port of your PC.
Copy the file into the USB Memory Drive.
4. Go to the USB Memory Drive and then double click the file
L530 firmware 1008.0.exe.
2. Save the firmware file onto your computer.
File : L530 firmware 1008.0.exe
5. Press “Unzip” button. 6. Unzipping is in progress.
7. After completing, press
“OK” and “Close” button.
8. The USB driver should contain one folder
named ‘T-PRLAUS’
9. Safely disconnect the USB memory drive
by right clicking the green check mark
on the taskbar and then left click
“Safely Remove”.
1. If you completed Step 1 from above, remove the File and Folder (listed
below) on your USB drive.
File : L530 firmware 1007.0.exe
Folder : T-PRLAUS
7
10. Turn your TV on and insert
the USB Memory Drive containing
the firmware upgrade into the
WISELINK port at the Side-AV panel.
NOTE: If you get the “WiseLink” on-
screen selection menu, select “NO”
※Important
If the firmware version you downloaded from the Samsung website
or received from Samsung is older than or has smaller version
number than the version on your TV, do not install it.
11. Press the Menu button on your
Remote Control.
12. Go to Setup.
On the Setup Menu,
select SW Upgrade, and then
press Enter or the arrow button
(▶) on your remote.
13. The TV will scan the USB Memory
Drive.
8
14. When the software upgrade is
complete the TV will turn off and
then back on by itself.
Proceed with the ‘Plug & Play’
setup
15. Once ‘Plug & Play’ is complete;
“Enjoy your watching.” is
displayed. Press the ‘Enter’ key
and you are done.
You can find more information in
User Manual.
※Do not pull the USB drive out and
unplug the power cable until
complete
※Important
If the firmware version you downloaded from the Samsung website
or received from Samsung is older than or has smaller version
number than the version on your TV, do not install it.
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Samsung LCD-Fernseher Handbücher
Samsung
Samsung LN26D450G1G Bedienungsanleitung
Samsung
Samsung LN-R237W1 Bedienungsanleitung
Samsung
Samsung LE22B350F Bedienungsanleitung
Samsung
Samsung LE40F7 Gebrauchs- und Pflegehandbuch
Samsung
Samsung LE70F9 Bedienungsanleitung
Samsung
Samsung LS-32A23WX Bedienungsanleitung
Samsung
Samsung LE27S71B Bedienungsanleitung
Samsung
Samsung LE32A Series Installationsanleitung
Samsung
Samsung LN52B630 - 52" LCD TV Bedienungsanleitung
Samsung
Samsung Series 4000 Bedienungsanleitung
Samsung
Samsung LN46D550 Bedienungsanleitung
Samsung
Samsung LN32B550K1R Bedienungsanleitung
Samsung
Samsung LE26R8 Bedienungsanleitung
Samsung
Samsung LE19R8 Bedienungsanleitung
Samsung
Samsung LT-P1745U Einrichtungshandbuch
Samsung
Samsung LN19A330J Bedienungsanleitung
Samsung
Samsung LA26R7 Bedienungsanleitung
Samsung
Samsung LN55C750 Bedienungsanleitung
Samsung
Samsung SyncMaster 933HD Plus Bedienungsanleitung
Samsung
Samsung LNR269D Bedienungsanleitung
