Samsung 913N - SyncMaster - 19" LCD Monitor Bedienungsanleitung

SyncMaster 913N/915N/912T

Failure to follow directions noted by this symbol could result in bodily harm or damage to

equipment.

Prohibited Important to read and understand at all times

Do not disassemble Disconnect the plug from the outlet

Do not touch Grounding to prevent an electric shock

Power

When not used for extended period of time, set your computer to DPMS.

If using a screen saver, set it to the active screen mode.

Do not use a damaged or loose plug.

zThis may cause an electric shock or fire.

Do not pull the plug out by the wire nor touch the plug with wet hands.

zThis may cause an electric shock or fire.

Use only a properly grounded plug and receptacle.

zAn improper ground may cause electric shock or equipment damage.

Do not excessively bend the plug and wire nor place heavy objects upon

them, which could cause damage.

zThis may cause an electric shock or fire.

Do not connect too many extension cords or plugs to an outlet.

zThis may cause fire.

Installation

Be sure to contact an authorized service center, when installing your monitor in a

location with the heavy dust, high or low temperatures, high humidity, chemical

substance and where it operates for 24 hours such as the airport, the train

station or etc.

Failure to do so may cause a serious damage to your monitor.

Put your monitor in a location with low humidity and a minimum of dust.

zFailure to do so may cause an electric shock or fire inside the monitor.

Do not drop the monitor when moving it.

zThis may cause damage to the product or human body.

Install the monitor base in a showcase or shelf so that the end of the

base does not project beyond the showcase or shelf.

zDropping the product may cause damage to the product or personal

injury.

Set down the monitor carefully.

zThe monitor could be damaged or broken.

Do not place the monitor face down.

zThe TFT-LCD surface may be damaged.

Installing a wall bracket must be done by a qualified professional.

zInstallation by unqualified personnel may result in injury.

zAlways use the mounting device specified in the owner's manual.

Install the product keeping a distance of 10 cm from the wall for

ventilation purposes.

zAn overheated product may catch fire.

Clean

When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with

a slightly moistened, soft fabric.

Do not spray water or detergent directly on the monitor.

zThis may cause damage, electric shock or fire.

Use the recommended detergent with a smooth cloth.

If the connector between the plug and the pin is dusty or dirty, clean it

properly with a dry cloth.

zA dirty connector can cause an electric shock or fire.

Contact the Service Center or Customer Center for interior cleaning

once a year.

zKeep the product's interior clean. Dust which has accumulated in the

interior over an extended period of time may cause malfunction or fire.

Other

Do not remove cover (or back). No user serviceable parts inside.

zThis may cause an electric shock or fire.

zRefer servicing to qualified service personnel.

If your monitor does not operate normally - in particular, if there are any

unusual sounds or smells coming from it - unplug it immediately and

contact an authorized dealer or service.

zThis may cause an electric shock or fire.

Be careful not to let water drip into the monitor or expose the monitor to

moisture.

zThis may cause malfunction, an electric shock or fire.

zEspecially avoid operating the monitor near water or outdoors where it

could be exposed to snow or rain.

If the monitor is dropped or the casing is damaged, turn the monitor off

and unplug the power cord.

zThe monitor may malfunction, causing an electric shock or fire.

zThen contact the Service Center .

Disconnect the plug from the outlet during storms or lightening or if it is

not used for a long period of time.

zFailure to do so may cause an electric shock or fire.

Do not try to move the monitor by pulling only the wire or the signal

cable.

zThis may cause a breakdown, electric shock or fire due to damage to

the cable.

Do not move the monitor right or left by pulling only the wire or the

signal cable.

zThis may cause a breakdown, electric shock or fire due to damage to

the cable.

Do not cover the vents on the monitor cabinet.

zBad ventilation may cause a breakdown or fire.

Do not place water containers, chemical products or small metal objects

on the monitor.

zThis may cause malfunction, an electric shock or fire.

zIf a foreign substance enters the monitor, unplug the power cord and

contact the Service Center .

Do not use or store inflammable substances near the monitor.

zThis may cause an explosion or fire.

Never insert anything metallic into the monitor openings.

zThis may cause an electric shock, fire or injury.

Do not insert metal objects such as chopsticks, wire and gimlet or

inflammable objects such as paper and match into the vent, headphone

port or AV ports.

zIt may cause a fire or an electric shock. If an alien substances or water

flows into the product, turn the product off, unplug the power connector

from the wall outlet and contact service center.

If you view a fixed screen for an extended period of time, residual image

or blurriness may appear.

zChange the mode to energy save or set a screensaver to moving picture

when you need to be away from the monitor for an extended period of

time.

Adjust the resolution and frequency to the levels appropriate for the

model.

zInappropriate resolution may cause undesirable picture quality.

15 inch - 1024 X 768

17,19 inch - 1280 X 1024

Watching the monitor continuously at a too close angle may result in

eyesight damage.

To ease eye strain, take at least a five-minute break after every hour of

using the monitor.

Do not install the product on an unstable, uneven surface or a location

prone to vibrations.

zDropping the product may cause damage to the product or personal

injury. Using the product in a location prone to vibrations may shorten

the lifetime of the product or may catch fire.

When moving the monitor, turn the power switch off and unplug the

power cord.

Make sure that all cables, including the antenna cable and cables

connected to other devices, are disconnected before moving the

monitor.

zFailure to disconnect the cable may damage it and lead to fire or an

electric shock.

Please make sure the following items are included with your monitor.

If an

items are missin

, contact

our deale

Unpacking

Option 1

Monitor & Sim

le stand Bottom

Option 2

Monitor & Pivot stand

Manual

Warrant

Card User's Guide,

SyncMaster 913NSyncMaster 913NSyncMaster 913N

Quick Setup Guide

(Not available in all

locations)

Monitor Driver,

Natural Color software,

icTune™ software

Cable

D-Sub Cable Power Cord

Front

1. Menu button [ ]

Opens the OSD menu. Also use to exit the OSD menu or return to

the previous menu.

2. MagicBright button

[]

MagicBright is a new feature providing optimum viewing

environment depending on the contents of the image you are

watching. Currently four different modes are available: Custom,

Text, Internet, and Entertain. Each mode has its own pre-

configured brightness value. You can easily select one of four

settings by simply pressing MagicBright control buttons.

1) Custom

Although the values are carefully chosen by our engineers, the

pre-configured values may not be comfortable to your eyes

depending on your taste.

If this is the case, adjust the Brightness and Contrast by using

the OSD menu.

2) Text : Normal Brightness

For documentations or works involving heavy text.

3) Internet : Medium Brightness

For working with a mixture of images such as text and

graphics.

4) Entertain : High Brightness

For watching motion pictures such as a DVD or VCD.

>>Click here to see an animation clip

3. Brightness button [ ] When OSD is not on the screen, Push the button to adjust

brightness.

2,3. Adjust buttons [ ] Adjust items in the menu.

4. Enter button [ ] Activates a highlighted menu item.

5. Auto button Use this button for auto adjustment.

6. Power button Use this button for turn the monitor on and off.

7. Power indicator

This light glows green during normal operation, and blinks green

once as the monitor saves your adjustments.

See PowerSaver described in the manual for further information regarding power saving

functions. For energy conservation, turn your monitor OFF when it is not needed, or when

leaving it unattended for long periods.

Rear

(The configuration at the back of the monitor may vary from product to product.)

1. Power port Connect the power cord for your monitor to the power port on the back

of the monitor.

2. D-sub 15-pin port Connect the signal cable to the 15-pin, D-sub connector on the back

of your monitor.

See Connecting the Monitor for further information regarding cable connections.

Andere Handbücher für 913N - SyncMaster - 19" LCD Monitor

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Monitor Handbücher

Samsung

Samsung SyncMaster 753Ms Bedienungsanleitung

Samsung

Samsung SYNCMASTER753DFX Bedienungsanleitung

Samsung

Samsung 305T - SyncMaster - 30" LCD Monitor Bedienungsanleitung

Samsung

Samsung 400DXn - SyncMaster - 40" LCD Flat Panel... Bedienungsanleitung

Samsung

Samsung STM-19LM Bedienungsanleitung

Samsung

Samsung WA86C Bedienungsanleitung

Samsung

Samsung SyncMaster S19A300B Bedienungsanleitung

Samsung

Samsung SyncMaster 650TS-2 Bedienungsanleitung

Samsung

Samsung SyncMaster 930MP Bedienungsanleitung

Samsung

Samsung SyncMaster 763MB Bedienungsanleitung

Samsung

Samsung SyncMaster 225MS Bedienungsanleitung

Samsung

Samsung S43AM70 Series Bedienungsanleitung

Samsung

Samsung SyncMaster 400MX-2 Bedienungsanleitung

Samsung

Samsung QB43R Bedienungsanleitung

Samsung

Samsung HP-T5044 Bedienungsanleitung

Samsung

Samsung 400DX - SyncMaster - 40" LCD Flat Panel... Bedienungsanleitung

Samsung

Samsung 2443BWX - SyncMaster - 24" LCD Monitor Bedienungsanleitung

Samsung

Samsung SyncMaster P63FP Benutzerhandbuch

Samsung

Samsung UD46E-A Bedienungsanleitung

Samsung

Samsung 725D Bedienungsanleitung

Samsung

Samsung SyncMaster S24A650S Bedienungsanleitung

Samsung

Samsung SyncMaster S22A650D Bedienungsanleitung

Samsung

Samsung S27AG50 Series Bedienungsanleitung

Samsung

Samsung SyncMaster 750ST Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung