Samsung SyncMaster 2263UW Bedienungsanleitung
SyncMaster 2263UW / 2463UW
LCD Monitor
User Manual
Introduction
Package Contents
Note
Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
Contact a local dealer to buy optional items.
Unpacking
Without stand With stand
Monitor Monitor
Manuals
Quick Setup Guide Warranty Card
(Not available in all loca-
tions)
User's Guide
Cables
D-Sub Cable Power Cord USB Cable
Sold separately
DVI Cable HDMI Cable Headphones
Others
Cleaning Cloth
Note
Cleaning Cloth is only provided for highly polished black products as a product feature.
Your Monitor
Initial Settings
Select the language using the up or down key.
The displayed content will disappear after 40 seconds.
Turn the Power button off and on. It will be displayed again.
It can be displayed up to three (3) times. Make sure to adjust the resolution of your PC before reaching
the maximum count.
Note
The resolution displayed on the screen is the optimal resolution for this product.
Adjust your PC resolution so that it is the same as the optimal resolution for this product.
Introduction
Cable holding ring
Front
MENU button [MENU/ ]
Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu
or return to the previous menu.
Customized Key
You can customize key assignment for the Custom button according to your pref-
erences.
Note
You can configure the Customized key for a required function via Setup > Cus-
tomized Key.
Volume button
When OSD is not on the screen, push the button to adjust volume.
>> Click here to see an animation clip
Adjust buttons [ ]
Adjust items in the menu.
SOURCE button / Enter button [ ]
Push the 'SOURCE/ ', then selects the video signal while the OSD is off. (When
the SOURCE/ button is pressed to change the input mode, a message appears
in the upper left of the screen displaying the current mode -- analog or digital input
signal.)
/ Activates a highlighted menu item.
Introduction
Note
If you select the digital mode, you must connect your monitor to the graphic card's
DVI port using the DVI cable.
>> Click here to see an animation clip
AUTO button
Use this button for auto adjustment.
(Available in Analog mode only)
>> Click here to see an animation clip
Power button [ ] / Power indicator
Use this button for turning the monitor on and off.
/ This light glows blue during normal operation, and blinking blue once as the
monitor saves your adjustments.
Camera
Using this camera, you can view and send video for video chatting.
Mic
Using this microphone, you can view and send audio for video chatting.
Speaker
You can hear sound by connecting the soundcard of your PC to the monitor.
- You can only hear sound from this monitor model if it is connected to a PC via
a USB cable.
Rear
Note
The configuration at the back of the monitor may vary from product to product.
POWER
Introduction
POWER
Connect the power cord for your monitor to the
POWER port on the back of the monitor.
HDMI / DVI IN / RGB IN
HDMI
Connect the HDMI terminal at the back of your
monitor to the HDMI terminal of your digital out-
put device using a HDMI cable.
DVI IN
Connect the DVI cable to the DVI IN port on the
back of your monitor.
RGB IN
Connect the RGB IN terminal at the back of your
monitor to your computer.
USB connection termi-
nal (Option)
UP (USB upstream port)
Connect the UP port of the monitor and the
USB port of the computer with the USB cable.
DOWN (USB downstream port)
Connect the DOWN port of the USB monitor
and a USB device with the USB cable.
Note
To use DOWN (Downstream Port), you have
to connect the UP (Upstream Cable ) to the
PC.
Make sure to use the USB cable supplied with this
monitor to connect the monitor's UP port
and your computer's USB port.
Introduction
Kensington Lock
The Kensington Lock is a device used to physi-
cally fix the system when using it in a public
place. The locking device has to be purchased
separately. The appearance and locking method
may differ from the illustration depending on the
manufacturer. Refer to the manual provided with
the Kensington Lock for proper use. The locking
device has to be purchased separately.
Note
The location of the Kensington Lock may be dif-
ferent depending on its model.
Using the Anti-Theft Kensington Lock
1. Insert the locking device into the Kensington
slot on the Monitor ( ) and turn it in the
locking direction ( ).
2. Connect the Kensington Lock cable.
3. Fix the Kensington Lock to a desk or a heavy
stationary object.
/ MIC
Headphone output terminal
MIC
Connect a microphone to the MIC terminal.
Cable holding ring
Fix the cables using the holding ring, as shown in
the figure.
Introduction
Note
See Connecting Cables for further information regarding cable connections.
Introduction
Connections
Connecting Cables
Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
Using the D-sub (Analog) connector on the video card.
• Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.
[RGB IN]
Using the DVI (Digital) connector on the video card.
• Connect the DVI Cable to the DVI IN Port on the back of your Monitor.
[DVI IN]
Connected to a Macintosh.
• Connect the monitor to the Macintosh computer using the D-sub connection cable.
Note
If the monitor and the computer are connected, you can turn them on and use them.
Connecting HDMI
Note
You can connect digital output devices to your monitor.
You can enjoy better screen and sound quality.
Connecting Using a HDMI Cable
1. Input devices such as digital DVD are connected to the HDMI terminal of the monitor using the
HDMI cable. When all the connections are completed, connect the power cords for the monitor
and DVD (or the device connected to the digital output terminal).
Select HDMI using the SOURCE button.
Connecting Using a DVI to HDMI Cable
1. Connect the DVI output terminal of a digital output device to the HDMI terminal of the monitor
using a DVI to HDMI cable.
2. To listen to sound via an external device, refer to the information in its user manual on how to
connect the device.
3. When all the connections are completed, connect the power cords for the monitor and DVD (or
the device connected to the digital output terminal).
4. Selet HDMI using the SOURCE button.
Note
If you just connect using the DVI to HDMI cable without connecting to the sound source, you cannot
hear sound.
Connections
Andere Handbücher für SyncMaster 2263UW
5
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Samsung Monitor Handbücher
Samsung
Samsung SyncMaster 740NW Bedienungsanleitung
Samsung
Samsung SyncMaster 743N Bedienungsanleitung
Samsung
Samsung 2333HD - SyncMaster - 23" LCD Monitor Benutzerhandbuch
Samsung
Samsung SyncMaster 932BF Bedienungsanleitung
Samsung
Samsung NL22B Bedienungsanleitung
Samsung
Samsung ED32D Bedienungsanleitung
Samsung
Samsung 2263DX - SyncMaster - 22" LCD Monitor Bedienungsanleitung
Samsung
Samsung SyncMaster 152T Bedienungsanleitung
Samsung
Samsung SyncMaster NC190 Bedienungsanleitung
Samsung
Samsung QM49F Bedienungsanleitung
Samsung
Samsung SyncMaster S27A850D Benutzerhandbuch
Samsung
Samsung HPT5054 - 50" Plasma TV Bedienungsanleitung
Samsung
Samsung WA65C Bedienungsanleitung
Samsung
Samsung S32R750QEN Bedienungsanleitung
Samsung
Samsung SyncMaster S19A300N Bedienungsanleitung
Samsung
Samsung 732N - LCD Analog Display Bedienungsanleitung
Samsung
Samsung SyncMaster S19B420B Bedienungsanleitung
Samsung
Samsung SyncMaster 2043BW Bedienungsanleitung
Samsung
Samsung DC43H Bedienungsanleitung
Samsung
Samsung QH65H Bedienungsanleitung
