Samsung SyncMaster 700S Bedienungsanleitung
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and servicing instructions in the literature
accompanying the appliance.
Unpacking your Monitor
Please make sure the following items are included with
your computer monitor:
This Manual
Warranty Card
(Not available in all areas)
Monitor and Stand
Power Cable
Signal Cable
ii
Table of Contents
Preface: Safety Information 2
Chapter One: Overview of Your Monitor 3
Front
Panel
3
RearPanel
4
Chapter Two: Installation 5
Connecting Your Monitor to a Computer
5
Chapter Three: Adjusting Your Monitor 6
Overview
6
Direct Access Features
6
Contrast
6
Brightness
6
Control Function Features
7
Position(H/V) / User or Preset Model
7
Size( H/V)
8
Geometric Distortion (G/D)
8
Color Temperature
9
Recall
9
Degauss
9
PowerSaver
10
Troubleshooting
11
Appendix
12
Specifications
12
Pin Assignments
13
Display Modes Timing Chart
13
FCC Information
14
IC Compliance Notice
16
VCCI Information
16
MPR II Compliance
16
European Notice
16
Index
17
1
Preface: Safety Information
Please read and follow these instruc-
tions when connecting and using your
computer monitor.
1
2
3
4
5
6
2
Before connecting the AC power
cord to an outlet, make sure the
voltage designation on your moni-
tor corresponds to the local elec-
trical supply.
Never insert anything metallic into
the monitor openings. Doing so
may create the danger of electric
shock.
To avoid electric shock, never
touch the inside of the monitor.
Only a qualified technician should
open the monitor’s case.
Never use your monitor if the
power cord has been damaged.
Do not allow anything to rest on
the power cord, and keep the cord
away from where people could trip
over it.
Be sure to hold the plug, not the
cord, when disconnecting the
monitor from an electric socket.
Openings in the monitor cabinet
are provided for ventilation. To
prevent overheating, these open-
ings should not be blocked or cov-
ered. Also, avoid using the monitor
on a bed, sofa, rug, or other soft
surface. Doing so may block the
ventilation openings in the bottom
of the cabinet. If you put the moni-
tor in a bookcase or some other
enclosed space, be sure to pro-
vide adequate ventilation.
7
Put your monitor in a location with
low humidity and a minimum of
dust. Avoid places like damp
basements or dusty hallways.
8
Do not expose the monitor to rain
or use it near water (in kitchens,
next to swimming pools, etc.). If
the monitor accidentally gets wet,
unplug it and contact an author-
ized dealer immediately. You can
clean the monitor with a damp
cloth when necessary, but be sure
to unplug the monitor first.
9
Place the monitor on a solid sur-
face and treat it carefully. The
screen is made of glass and can
be damaged if dropped or sharply
hit.
10
Locate your monitor near an easily
accessible AC outlet.
11
If your monitor does not operate
normally – in particular, if there
are any unusual sounds or smells
coming from it – unplug it immedi-
ately and contact an authorized
dealer or service center.
12
High temperatures can cause
problems. Don’t use your monitor
in direct sunlight, and keep it away
from heaters, stoves, fireplaces,
and other sources of heat.
13
Unplug the monitor when it is
going to be left unused for an
extended period of time.
14
Unplug your monitor from the AC
outlet before any service.
English
Chapter One: Overview of Your Monitor
Front Panel
Function control buttons
Use these buttons to control the shape of the display
area, and to control the color qualities of the display
image.
1
2
3
4
5
Brightness
Use this rotary control to adjust the overall bright-
ness of the display image.
Contrast
Use this rotary control to adjust the contrast level of
the display image.
Power indicator
This light glows green during normal operation, and
glows amber when you are making adjustments.
Power button
Use this button to turn the monitor on and off.
3
3
Chapter One: Overview of Your Monitor
Rear Panel
1
Power port
Connect the power cable here.
2
Signal port
Connect your signal cable here.
4
English
Chapter Two: Installation
Connecting Your Monitor
to a Computer
1
2
3
4
Turn off your computer and unplug
its power cord.
Connect the signal cable to the
signal port on the back of your
monitor.
If you are using a Macintosh com-
puter, connect the other end of the
signal cable to a Macintosh
adapter. (The adapter is not includ-
ed with your monitor. Contact your
dealer for more information.) If you
are using an IBM-compatible com-
puter, skip to step 5.
Follow the instructions included
with your adapter to set the pins
on your adapter, if necessary.
5
6
7
8
Connect the signal cable (with the
adapter if necessary) to the video
port on the back of your computer.
This port might be directly
attached to your computer, or it
might be part of a video board,
video card, or graphics card.
Connect the power cord for your
monitor to the power port on the
back of the monitor.
Plug the power cords of your com-
puter and your monitor into a near-
by outlet.
Turn on your computer and mon-
itor. If your monitor displays an
image, installation is complete.
5
Chapter Three: Adjusting Your Monitor
Overview
Your Samsung SyncMaster computer monitor allows you
to easily adjust the characteristics of the image being dis-
played. All of these adjustments are made using the con-
trol buttons on the front of the monitor. While you use
these buttons to adjust the controls, an on-screen menu
shows you their numeric values as they change.
Direct-Access Features
The features described on this page can be accessed
quickly, at the touch of one button.
Contrast
This feature will adjust the monitor’s contrast.
Rotate the rotary control to the right to increase the
contrast between dark colors and light colors, or
move it to the left to decrease the contrast.
Brightness
This feature will adjust the overall brightness of the display
image.
Rotate the rotary control to the right to increase the
level of brightness, or to the left to decrease the
brightness.
6
Chapter Three: Adjusting Your Monitor
Control Function Features
The features described in this section can all be accessed
using your monitor’s control function buttons.
While implementing control functions, the indicator’s color
is orange. However, you cannot adjust the display image
while a control function is disabled (the indicator’s color is
green).
Most features use only one button for access, however
some features require that you push two buttons. Follow
the instructions below to adjust the features.
The monitor will automatically save your changes when
the OSD remains inactive for approximately 8 seconds.
Position (H/V) / User or Preset Mode
First Function: Position (H/V)
Follow these instructions to change the position of the
monitor’s entire display.
1
Push this button once to adjust the horizontal and
vertical position (centering) of the display.
2
Use the
4
and
b
buttons to change the horizontal
position of the entire display; use the
V
and
A
but-
tons to change the vertical position.
Second Function: User or Preset Modes
Push this button twice to access the user and preset
modes information. The OSD shows the contents of the
user modes and factory timing modes. Use the adjustment
control buttons
(V
and
A)
to “page” through the list.
7
Chapter Three: Adjusting Your Monitor
Size (H/V)
Follow these instructions to change the size of the moni-
tor’s entire display.
1
Push this button once to adjust the horizontal and
vertical size of the entire display.
2
Use the
4
and
b
buttons to change the horizontal
size (width) of the entire display; use the
V
and
A
buttons to change the vertical size (height).
Geometric Distortion (G/D)
First function: Pincushion / Trapezoid
Adjust the pincushion setting when the sides of the display
are bowed in or bowed out.; adjust the trapezoid setting to
equalize the length of the top and bottom edges.
1
Push this button once to access the pincushion and
trapezoid functions.
2
Use the
4
and
b
buttons to change the pincushion
setting; use the
V
and
A
buttons to change the
trapezoid setting.
Second function: Parallelogram/ Tilt
Adjust the parallelogram setting when the display is lean-
ing left or right; adjust the tilt setting when the display area
appears rotated to the left or right.
1
Push this button twice to access the parallelogram
and tilt functions.
2
Use the
4
and
b
buttons to change the parallelo-
gram setting; use the
V
and
A
buttons to adjust the
tilt setting.
8
Inhaltsverzeichnis
Andere Samsung Monitor Handbücher
Samsung
Samsung SyncMaster 206NW Bedienungsanleitung
Samsung
Samsung SyncMaster S22A650S Benutzerhandbuch
Samsung
Samsung DB43J Bedienungsanleitung
Samsung
Samsung DC43H Bedienungsanleitung
Samsung
Samsung SyncMaster LD190G Bedienungsanleitung
Samsung
Samsung SyncMaster 210P PLUS Bedienungsanleitung
Samsung
Samsung U28R550UQR Bedienungsanleitung
Samsung
Samsung 305T - SyncMaster - 30" LCD Monitor Bedienungsanleitung
Samsung
Samsung SyncMaster 460DR-2 Bedienungsanleitung
Samsung
Samsung 730B - SyncMaster - 17" LCD Monitor Bedienungsanleitung
Samsung
Samsung IWB Series Bedienungsanleitung
Samsung
Samsung 2333HD - SyncMaster - 23" LCD Monitor Benutzerhandbuch
Samsung
Samsung SMO-152QN - Monitor + Camera 4 Bedienungsanleitung
Samsung
Samsung S27E330H Bedienungsanleitung
Samsung
Samsung Samtron 98BDF Bedienungsanleitung
Samsung
Samsung SyncMaster P2270HD Bedienungsanleitung
Samsung
Samsung C22F392FH series Bedienungsanleitung
Samsung
Samsung SP-P4251 Bedienungsanleitung
Samsung
Samsung SR350 Bedienungsanleitung
Samsung
Samsung 953BW - SyncMaster - 19" LCD Monitor Benutzerhandbuch
