Samsung SyncMaster 800TFT Bedienungsanleitung

SyncMaster 800TFT

TFT-LCD Monitor

Owner’s

Instructions

e-cover Page 0 Monday, May 29, 2000 2:04 PM

Unpacking your Monitor

Please make sure the following items are included with your monitor. If any items are missing, contact

your dealer.

†

The stand type is subject to change based on monitor.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Manual

Warranty Card

Coloriﬁc & Driver

13W3 Signal Cable

(Optional)

Power Cord

† Monitor and Stand 15-pin D-Sub Signal Cable

Power adapter Cable Holder

DC-Adapter

(Not available in all areas)

e-cover Page i Monday, May 29, 2000 2:04 PM

FrançaisDeutschEspañolPortu-

English

Italiano

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Your Flat Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Plug and Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Auto Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Maintenance of Your Flat Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Self-Test Feature Check (STFC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Adjusting Your FPD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Automatic Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Direct-Access Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

OSM Lock/Unlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Accessing the Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

PowerSaver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Speciﬁcations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Changing the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Removing the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Attaching an Arm-Type Stand or Wall Mount Hanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index-1

Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside back cover

Contents

sa800e1toc.fm Page 1 Monday, May 29, 2000 1:28 PM

Safety Instructions

Before connecting the AC power cord to the DC adapter outlet, make sure the voltage

designation of the DC adapter corresponds to the local electrical supply.

Never insert anything metallic into the openings in the cabinet of the ﬂat panel

display monitor (FPD). Doing so may create the danger of electric shock.

To avoid electric shock, never touch the inside of the FPD. Only a qualiﬁed technician

should open the FPD’s case.

Never use your FPD if the power cord has been damaged. Do not allow anything to

rest on the power cord, and keep the cord away from areas where people can trip over

it.

Be sure to hold the plug, not the cord, when disconnecting the FPD from an electric

socket.

Openings in the FPD cabinet are provided for ventilation. To prevent overheating,

these openings should not be blocked or covered. Also, avoid using the FPD on a bed,

sofa, rug, or other soft surface. Doing so may block the ventilation openings in the

bottom of the cabinet. If you put the FPD in a bookcase or some other enclosed space,

be sure to provide adequate ventilation.

Put your FPD in a location with low humidity and a minimum of dust.

Do not expose the FPD to rain or use it near water (In kitchens, near swimming pools,

etc.). If the FPD accidentally gets wet, unplug it and contact an authorized dealer

immediately. You can clean the FPD with a damp cloth when necessary, but be sure to

unplug the FPD ﬁrst.

Place the FPD on a solid surface and treat it carefully. The screen is made of thin glass

with a plastic front surface and can be damaged if dropped, hit or scratched. Do not

clean the front panel with keton-type materials (e.g.,acetone), ethyl alcohol, toluene,

ethyl acid, methyl, or chloride-these may damage the panel.

Locate your FPD near an easily accessible AC outlet.

If your FPD does not operate normally – in particular, if there are any unusual sounds

or smells coming from it – unplug it immediately and contact an authorized dealer or

service center.

High temperature can cause problems. Don’t use your FPD in direct sunlight, and keep

it away from heaters, stoves, ﬁreplaces, and other sources of heat.

Unplug the FPD when it is going to be left unused for an extended period of time.

Unplug your FPD from the AC outlet before any service.

sa800e2.fm Page 2 Monday, May 29, 2000 2:09 PM

FrançaisEspañolDeutschItaliano EnglishPortuguese

Figure 1. Front panel

Video input selector (A/B) and indicator lights

Your Flat Panel Display (FPD) monitor allows you to connect both a workstation and a

computer system to it at the same time. Use this button to select which system your

FPD should display. Indicator “A” will glow green when a workstation is the active

system and indicator “B” will glow green when an alternate computer system is

active.

Menu access controls

Use these buttons to open the On-Screen Menu (OSM) system access the Auto

Adjustment Direct-Access Control, select a menu, and to exit from the OSM.

Power button and indicator light

Use this button to turn the FPD on and off. The power indicator light glows green

during normal operation.

OSM adjustment controls and direct-access controls

Use these buttons to access the Brightness and Contrast Direct-Access controls and

to make adjustments to the various OSM features.

Your Flat Panel Monitor

sa800e2.fm Page 3 Monday, May 29, 2000 2:09 PM

Figure 2. Back panel connectors

Power adapter connector

Connect the power adapter jack here.

15-pin, mini D-sub signal cable connector

Connect a computer system to this connector.

13W3 signal cable connector

Connect a 13W3 cable (Optional) from the video connector on your workstation to this

connector.

Power adapter cable holder slot

The plastic cable holder ﬁts into this slot to protect the power adapter jack from being

inadvertently dislodged. To disconnect the power adapter, turn the plastic holder 1/4

turn to the left or right and pull the holder out of the cabinet.

Kensington security slots

This FPD offers you the opportunity to attach a Kensington-type security device in two

different locations; on the panel cabinet or on the tower stand. Please note that the

location on the panel cabinet is more secure than the one on the tower stand.

Kensington lock not included. Refer to your locking device documentation for

installation instructions.

USB hub receptacle

You may install a self-powered USB hub in this slot. Remove the cover to reveal the

available space.

526

Your Flat Panel Monitor

sa800e2.fm Page 4 Monday, May 29, 2000 2:09 PM

FrançaisEspañolDeutschItaliano EnglishPortuguese

Figure 3. Connecting your monitor to a PC

Turn off your system and unplug its power cord.

Place the FPD facedown on a cushion (being careful not to harm the screen) so that

you can access the cable connectors along the bottom of the rear recess.

When connecting your FPD to a computer: Connect the supplied signal cable to the

15-pin mini D-sub connector

on the back of your FPD. Connect the other end of the

cable to the video port on the back of your computer.

When connecting your FPD to a workstation: Connect an optional signal cable to the

13W3 connector

on the back of your FPD. Connect the other end of the cable to the

video port on the back of your workstation. An adapter may be required.

NOTE:

One or both types of signal cables can be connected to the FPD,

simultaneously.

Connect the power adapter jack to the power port

on the back of the FPD. To

prevent dislodging the jack, slide the power adapter cable into the cable holder. Insert

the cable holder into the holder slot and turn it 1/4 turn. Connect the proper power

cord for your locale to the AC inlet on the power adapter.

Place your FPD upright on your desk and plug the power cords from your system and

your FPD into a nearby outlet.

Turn on your system and FPD. If your FPD displays an image, installation is complete.

Perform the auto adjustment procedure as described in “Auto Adjustment” on page 6

1To workstation

video port

Installation

sa800e2.fm Page 5 Monday, May 29, 2000 2:09 PM

Getting Help

If your FPD does not display an image, check your cable connections and refer to

“Troubleshooting” on page 16. If you experience difﬁculties with the quality of the displayed

image, run auto adjustment again and refer to “Adjusting Your FPD” on page 8 or

“Troubleshooting” on page 16.

Plug and Play

Our adoption of the new VESA

Plug and Play solution eliminates complicated and time

consuming setup. It allows you to install your FPD without the usual hassles and confusion.

Your system can easily identify and conﬁgure itself for use with your display. This ﬂat panel

display automatically tells the system its Extended Display Identiﬁcation (EDID) data using

Display Data Channel (DDC) protocols so the system can automatically conﬁgure itself to use

the ﬂat panel display.

Auto Adjustment

Even though your computer system can recognize your new ﬂat panel display system, the

auto adjustment function will optimize the display settings for use with your computer. Use

Auto Adjustment whenever the FPD has become misaligned or whenever the displayed

image is unsatisfactory.

Turn on your computer and ﬂat panel display.

Push the EXIT button to open the Auto Adjustment OSM.

Push the + button to activate the Auto Adjustment function. The screen will dim and

you may notice small changes to the screen image and “Auto Adjustment” will blink

on and off on the OSM. To abort the Auto Adjustment function, press the EXIT button

again.

When ﬁnished, the screen will stop changing. Press the EXIT button to leave the OSM

or allow the OSM to time-out and disappear automatically.

Maintenance of Your Flat Panel Display

WARNING:

To avoid risk of electric shock, do not disassemble the FPD cabinet.

The unit is not user-serviceable. User maintenance is restricted to cleaning as explained

below:

•

Unplug the FPD from the power outlet before cleaning.

Installation

sa800e2.fm Page 6 Monday, May 29, 2000 2:09 PM

FrançaisEspañolDeutschItaliano EnglishPortuguese

•

To clean your ﬂat panel display screen, lightly dampen a soft, clean cloth with

water or mild detergent. If possible, use a special screen cleaning tissue or solution

suitable for the antistatic coating.

•

To clean the monitor cabinet, use a cloth lightly dampened with a mild detergent.

•

Never use ﬂammable cleaning material to clean your ﬂat panel display or any other

electrical apparatus.

Self-Test Feature Check (STFC)

Your FPD provides a self test feature which allows you to check if your FPD is functioning

properly. If your FPD and computer are properly connected but the FPD screen remains dark

and the power indicator is lit, use the following steps to perform the FPD self test:

Turn off both your computer and the monitor.

Unplug the video cable from the computer or video card.

Turn on the monitor.

If the FPD is functioning properly, you will see a white box with a red border and black text

inside stating:

Figure 4. FPD self-test screen

The three boxes inside the border are red, green and blue. Failure of any of the boxes to

appear indicates a problem with your FPD.

This box will also appear during normal operation of your system if the video cable becomes

disconnected or damaged.

Turn off your FPD and reconnect the video cable; then turn on both your system and

the monitor.

If your ﬂat panel display screen remains black after using the above procedure, check your

video controller and computer system; your FPD is functioning properly.

Check Signal Cable

No Connection

Installation

sa800e2.fm Page 7 Monday, May 29, 2000 2:09 PM

Your ﬂat panel display allows you to easily adjust the characteristics of the image being

displayed. All of these adjustments are made using the control buttons on the front of the

FPD. While you use these buttons to adjust the controls, an on-screen menu shows you their

numeric values as they change.

Figure 5. User controls

Video Selector (A/B) button and indicators

The Video Selector button allows you to select between two different computer

systems which may be connected to your FPD. “A” is for use with a workstation, while

“B” is for use with an alternate computer system. An indicator light glows green

beneath the A and B letters indicating which system is active on the ﬂat panel display

screen.

EXIT button

The EXIT button opens the Auto Adjustment on-screen menu (OSM), exits from menus

and sub-menus, and exits the OSM.

MENU button

This button opens the OSM system and activates the highlighted function.

Power button and indicator

Use this button to turn the FPD on and off. The power indicator light glows green

during normal operation.

The –/+ ( / and ) buttons

When used with the OSM system, these buttons allow you to select sub-menu items

and to move the selector between menu rows on the OSM. These buttons are also

direct access buttons for the Brightness feature control. (See the section on

Direct-Access Buttons.)

The –/+ ( / and ) buttons

These buttons allow you to move the selector between menus and to select items on

the on-screen menu. When adjusting an item using the OSM, the “ – “ ( ) button

lowers the value of the selected function. The “ + “ ( ) button raises the value of the

selected function. These buttons are also direct access buttons for the Contrast

feature control. (See the section on Direct-Access Buttons)

12 3 4 5 6

Adjusting Your FPD

sa800e2.fm Page 8 Monday, May 29, 2000 2:09 PM

Andere Handbücher für SyncMaster 800TFT

Inhaltsverzeichnis

Andere Samsung Monitor Handbücher

Samsung

Samsung PS-42P4H Gebrauchsanweisung

Samsung

Samsung HP-P4271 Bedienungsanleitung

Samsung

Samsung DM65E-BR Bedienungsanleitung

Samsung

Samsung LH98QMFPBGCEN Bedienungsanleitung

Samsung

Samsung DM67E Bedienungsanleitung

Samsung

Samsung SyncMaster 520TFT Bedienungsanleitung

Samsung

Samsung SyncMaster 570DXn Bedienungsanleitung

Samsung

Samsung SyncMaster XL24 Bedienungsanleitung

Samsung

Samsung SyncMaster S22A300N Bedienungsanleitung

Samsung

Samsung 2263DX - SyncMaster - 22" LCD Monitor Bedienungsanleitung

Samsung

Samsung 151MP - SyncMaster 151 MP Bedienungsanleitung

Samsung

Samsung C49RG90SS Series Bedienungsanleitung

Samsung

Samsung STM-17LV Bedienungsanleitung

Samsung

Samsung 2333HD - SyncMaster - 23" LCD Monitor Bedienungsanleitung

Samsung

Samsung 2043SWX - 5ms Widescreen LCD Monitor Benutzerhandbuch

Samsung

Samsung SyncMaster 757MB Bedienungsanleitung

Samsung

Samsung SPN4235 Bedienungsanleitung

Samsung

Samsung SyncMaster B2230HD Bedienungsanleitung

Samsung

Samsung SyncMaster S23A950D Bedienungsanleitung

Samsung

Samsung 460DX - SyncMaster - 46" LCD Flat Panel... Installationsanleitung

Samsung

Samsung S24F356FHR Bedienungsanleitung

Samsung

Samsung SyncMaster S22B300B Bedienungsanleitung

Samsung

Samsung SyncMaster S22A350H Bedienungsanleitung

Samsung

Samsung SyncMaster P50FP Benutzerhandbuch

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung