Samsung PS-42D4S Bedienungsanleitung

PLASMA DISPLAY TV

Chassis : D65C(P)Europe_Rev.1

Model : PS42D4SX/BWT

PLASMA DISPLAY TV CONTENTS

Specifications

Alignment and Adjustments

Exploded View and Parts List

Service Item

Schematic Diagrams

SERVICE Manual

ELECTRONICS

©Samsung Electronics Co., Ltd. May. 2004

Printed in Korea

AA82-01737A

This Service Manual is a property of Samsung Electronics Co.,Ltd.

Any unauthorized use of Manual can be punished under applicable

International and/or domestic law.

Specifications

Samsung Electronics 1-1

1. Specifications

1-2 Samsung Electronics

MEMO

Alignment and Adjustments

Samsung Electronics 2-1

2. Alignment and Adjustments

2-1 Service Mode

2-1-1 SERVICE MODE Entry Method (General Transmitter)

▶Using the Customer Remote

1. Turn the power off and set to stand-by mode.

2. Press the remote buttons in this order; POWER OFF-INFO-MENU-MUTE-POWER ON to turn the set on.

3. The set turns on and enters service mode.

▶Using the Factory Remote

1. Turn the power on.

2. Press the remote buttons in this order : Display-Factory.

3. The set enters service mode.

* If you fail to enter service mode, repeat steps 1 and 2 above.

2-1-2 Initial SERVICE MODE DISPLAY State

2-1-2(A) OSD DISPLAY

2-1-2(B) Button Operations in SERVICE MODE

* While in Tuner mode, the direct access buttons can be used to select and change channels.

☞Indicates selected input mode

☞Picture Adjustment

☞Setting the Initial Values

☞Setting the Special Features

☞Options-1 : Particulars Product Options

☞Options-2 : PDP Properties Options

☞Initializing after saving the adjustments

☞Software Version Information

Factory Mode Current Input Mode

01. Picture Improvement ▶

02. Initial Setting ▶

03. PIP/TTX/Test Pattern ▶

04. Option-1 ▶

05. Option-2 ▶

06. Reset ▶

Release : 2004-05-20-16:30

Version : T-NELPCI-1029

Menu Displays all menus

UP/DOWN Cursor moves to select items

LEFT/RIGHT To increase and decrease the data of the selected items

(ENTER) Confirm your choice(Store OR Enter)

TV/VIDEO Button Change input source

Alignment and Adjustments

2-2 Samsung Electronics

2-2 WHITE Balance Coordinates

2-2-1 PS42D4S/PS42V4S White Balance Adjustment

1. W/B Adjustment is required for the following six modes :

DVI -> Component(720p) -> Component(1080i) -> PC -> VIDEO (Video port) -> VIDEO (Graphic port)

2. Adjustment Method (Signal equipment : MSPG-925LTH, Measurement equipment : CA210)

■MSPG-925LTH

Equipment that outputs analog and digital signals simultaneously

(Analog / Digital signal output / TV signal output (S-Video included) / HDTV signal output)

-. Digital Serial : TMDS (DVI24, SiI160) + DVI-I (Analog, Digital)

-. Monitor Signal (Analog): R, G, B, HS, VS, CS

-. TV Signal(CVBS) : NTSC M, NTSC J (7.5 IRE On/Off) (BNC or RCA), PAL B, D, G, H, I, PAL M, Nc

-. D-TV Signal (1080i, 720p, 480p)

♣MSPG-925 is used to adjust the W/B.

■CA210 : Color Analyzers adjusting brightness, chromaticity and etc.

-. R.G.B monochrome correction, brightness and gamma character adjustment

-. White Balance and flickering measurement

(a) DVI

1) Input Toshiba Pattern at 720p resolution using MSPG-925LTH (model:#6, pattern:#16).

2) These are the point of measurement using CA210.

3) Press "POWER OFF-INFO-MENU-MUTE-POWER ON" to enter the factory mode.

4) Select "01.Picture Improvement" -> "01.White Balance"

5) Keep the value of Y as adjusting "07.Sub Contrast(for HIGH)" & "08.Sub Brightness(for LOW) ".

6) Keep the coordinate value of x and y as adjusting the value of R,G,B.

Adjust the coordinate x as the value of Red, and the coordinate y as the value of Blue.

<※Generally, the value of Green is fixed.>

-. Adjust the value of "Drive(01~03)" as the high point and the value of "Cutoff(04~06)" as low point.

Alignment and Adjustments

Samsung Electronics 2-3

※Auto Color

-. Must be executed in Component/PC before adjusting White Balance.

1) Input Auto Color Pattern with MSPG-925LTH(model:#6, pattern:#21).

2) Press "POWER OFF-INFO-MENU-MUTE-POWER ON" to enter the factory mode.

3) Select "01.Picture Improvement" ¡æ "01.White Balance" -> "15.Auto Color"

and Select "Off" -> "On"

4) It takes a few seconds to execute it.

(b) Component

1) Execute Auto Color in the method described above.

2) Input Toshiba Pattern at 720p resolution (model:#6, pattern:#16).

3) Select "01.Picture Improvement" -> "01.White Balance".

4) Adjust White Balance by selecting and adjusting Items 01. - 08. as performed in DVI mode.

5) Change input to Toshiba Pattern at 1080i resolution (model:#5, pattern:#16).

6) Adjust White Balance by selecting and adjusting Items 01. - 08. as performed in DVI mode.

1) Execute Auto Color in the method described above.

2) Input Toshiba Pattern at 800 x 600 (model:#16, pattern:#16).

3) Select "01.Picture Improvement" -> "01.White Balance".

4) Adjust White Balance by selecting and adjusting Items 01 - 08 as performed in DVI mode.

(d) Video

The video signal uses the video port when there is no other input signal.

However, signal uses the graphic port in PIP mode, which includes other input signals (PC, DVI, Component, etc.), Video adjust-

ment should be performed with Video port and Graphic port separately.

1) Input Toshiba Pattern to Video Input (model:#2, pattern:#16).

2) Select "04.Option-1" -> "10.Video Port."

3) Set "10. Video Port" equal to "Video".

4) At Main SVC Menu, select "01.Picture Improvement" -> "01.White Balance."

5) Adjust Items 01 - 08 as performed in DVI mode.

6) Return to Main SVC menu and select "04.Option-1" -> "10.Video Port."

7) Set "10. Video Port" equal to "Graphic".

H/L

L/L

Y(fL)

VIDEO

285

295

285

295

0.6

Component

285

295

285

295

0.7

PC(D4 ONLY)

278

285

280

295

0.6

DVI

280

295

280

295

1.8

2-2-2 White Balance Coordinates by Mode(Europe)

Alignment and Adjustments

2-4 Samsung Electronics

8) At Main SVC Menu, select "01.Picture Improvement" -> "01.White Balance".

9) Adjust Items 01 -> 08 as performed in DVI Mode.

* Thus, Micom saves the W/B data separately for each memory mode of the block (See the block diagram given below) during

W/B adjustment.

Alignment and Adjustments

Samsung Electronics 2-5

2-3-1 Factory OSD Main Menu

2-3 Factory Data

☞Indicates selected input mode

☞Picture Adjustment

☞Setting the Initial Values

☞Setting the Special Features

☞Setting PDP Properties Options

☞Initializing after saving the adjustments

☞Software Version Information

01.Picture Improve

Factory Mode Current Input Mode

01. Picture Improvement ▶

02. Initial Setting ▶

03. PIP/TTX/Test Pattern ▶

04. Option-1 ▶

05. Option-2 ▶

06. Reset ▶

Release : 2004-05-20-16:30

Version : T-NELPCI-1029

☞White Balance Adjustment

☞Color Adjustment

☞Contrast & Brightness Enhancement

☞Detail Enhancement Sharpness Adjustment

☞Y/C Delay Setting according to the System and

Input Modes

☞Motion Enhancing Adjustment

☞DNIe Registers

☞Logic Registers of the Panel

☞Picture Size Registers

01.Picture Improvement Current Input Mode

01. White Balance ▶

02. Color ▶

03. Cont/Bri Enhancement ▶

04. Detail Enhancement ▶

05. Y/C Delay ▶

06. Motion ▶

07. DNIe ▶

08. Logic ▶

09. Picture Size ▶

Alignment and Adjustments

2-6 Samsung Electronics

01.Picture Improve => 01.White Balance Adjustment

01.White Balance

01.R Drive

02.G Drive

03.B Drive

04.R Cutoff

05.G Cutoff

06.B Cutoff

07.Sub Contrast

08.Sub Brightness

09.R Gain

10.G Gain

11.B Gain

12.R/Cr Offset

13.G/Y Offset

14.B/Cb Offset

15.Auto color

140

130

120

128

142

on/off

Mode-1

140

130

120

128

Initial Values of Input Modes

Video Component PC(D4 ONLY) DVI

Relevant IC

Logic

DNIe

AD9883

ITEM

♣Input modes require respective storing the changes after adjustment.

01~06 : Logic

07~08 : DNIe

09~15 : AD9883

Mode-2

140

130

120

128

150

128

Mode-4

140

130

120

128

Mode-3

140

130

120

128

Andere Handbücher für PS-42D4S

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Plasma-TV Handbücher

Samsung

Samsung BN68-02577B-06 Bedienungsanleitung

Samsung

Samsung ps63c7700yw Bedienungsanleitung

Samsung

Samsung Series 4+ Bedienungsanleitung

Samsung

Samsung PS50C670G3S Bedienungsanleitung

Samsung

Samsung HP-S4253 Einrichtungshandbuch

Samsung

Samsung PL43D490 Bedienungsanleitung

Samsung

Samsung LED 6500 series Bedienungsanleitung

Samsung

Samsung 550 Series Bedienungsanleitung

Samsung

Samsung PS-42P4A1 Kurzanleitung

Samsung

Samsung PS43D490 Bedienungsanleitung

Samsung

Samsung 650 Series Bedienungsanleitung

Samsung

Samsung PS-42D51S Bedienungsanleitung

Samsung

Samsung PS42C430A1W Bedienungsanleitung

Samsung

Samsung PN50C490B3D Bedienungsanleitung

Samsung

Samsung PN58C680 Bedienungsanleitung

Samsung

Samsung PS50A476P1D Bedienungsanleitung

Samsung

Samsung PN51D430 Bedienungsanleitung

Samsung

Samsung SP-P4231 Bedienungsanleitung

Samsung

Samsung PS42C450B1W Bedienungsanleitung

Samsung

Samsung Series 5+ 530 PN51D530 Bedienungsanleitung

Samsung

Samsung PS50A552S1R Bedienungsanleitung

Samsung

Samsung PS43D450A2W Bedienungsanleitung

Samsung

Samsung PN42A410 Bedienungsanleitung

Samsung

Samsung SSG-5100GB Bedienungsanleitung

Beliebte Plasma-TV Handbücher anderer Marken

Hitachi

Hitachi 50PD9800TA Bedienungsanleitung

LG 60PA5500 Bedienungsanleitung

Sony

Sony WEGA KE-P42M1 Bedienungsanleitung

VESTEL

VESTEL PL2000 Bedienungsanleitung

VisionQuest

VisionQuest PVQ-32VGB Bedienungsanleitung

Maxent

Maxent MX-5020HPM Bedienungsanleitung

LG 50PK550 Bedienungsanleitung

LG PJ550N Bedienungsanleitung

LG 42LG70ER Bedienungsanleitung

Panasonic

Panasonic Viera TH-37PA60EY Bedienungsanleitung

LG DU-42PZ60H Bedienungsanleitung

Panasonic

Panasonic Viera TH-42PX80A Bedienungsanleitung

Panasonic

Panasonic VIERA TH-P50X30D Bedienungsanleitung

Panasonic

Panasonic TH-50PX20U/P Bedienungsanleitung

Panasonic

Panasonic TH-37PW7BX Bedienungsanleitung

Nexus

Nexus NX422 Bedienungsanleitung

Panasonic

Panasonic TX-PR42U10 Bedienungsanleitung

Panasonic

Panasonic TH42PV500EY Bedienungsanleitung