Samsung ML-7000P Bedienungsanleitung

ML-7000 Series

ML-7000P

ML-7000N

QwikLaser 7000

QwikLaser 7000P

QwikLaser 7000N

Laser printer Contents

SERVICE Manual

1. Precautions

2. Reference Information

3. Product Information

4. Disassembly

5. Trouble Shooting

6. Exploded Views & Parts List

7. Block Diagrams

8. PCB Diagrams

9. Port Thru

(Network Printer Card)

Download Service Manual And Resetter Printer at http://printer1.blogspot.com

5. Troubleshooting

5-1 Print Quality

Error status Check Solution

1. Check HVPS output voltage 1. Refer to HVPS output spec

Dark Image 2. Check terminal contact for - Replace the engine board

HVPS. - Refer to “4 - 11”

2. Fix the terminal to contact well.

1. Check the toner quantity. 1. Replace image cartridge.

Light Image 2. Check HVPS output voltage 2. Refor to HVPS output spec.

3. Check the terminal contact for -Replace the engine board.

HVPS. 3. Fix the terminal to contact well.

1. Compare new image cartridge 1. Replace image cartridge

Horizontal Density with present one

Band. 2. Contamination of Transfer 2. Replace transfer roller

Roller

1. Contamination of Fuser Unit 1. Clean Fuser Unit or change

If not improved, replace it.

2. Contamination of Heat roller 2. Clean Heat Roller

Print Contamination - Refer to “4-5”

3. Contamination of OPC Drum 3. Clean OPC Drum.

If not improved, replace image

cartridge.

1. Contamination of Fuser Unit 1. Clean Fuser Unit.

If not improved, replace it.

Toner on Backside - Refer to “4-5”

of printer page 2. Contamination of transfer Roller 2. Replace Transfer Roller

3. Contamination fo paper path 3. Remove the contamination on

paper path.

1. Check HVPS output voltage 1. Refer to HVPS output spec

2. OPC Drum contamination or - Replace the engine board

image cartridge life 2. Replace the image cartridge

3. Check the contamination of 3. Clean the lens with a soft

Back Ground PTL lens dry cloth

4. Check the terminal contact for 4. Fix the terminal to contact well.

HVPS.

5. Check the contamination fo transfer 5. Relpace Transfer Roller

roller.

Vertical Black Streak 1. OPC Drum scar 1. Clean OPC Drum

and band 2. OPC Drum damage 2. Replace image cartridge

Vertical White Streak 1. Contamination of LSU window 1. Clean LSU window

2. If not improved,

replace image cartridge

1. OPC Drum scar or particle 1. Clean OPC Drum & roller

2. Heat roller scar or particle 2. Cleaning heat roller

3. Develope roller scar or particle 3. Clean the develope roller.

Partial Black Image If not improved,

(periodic) replace image cartridge.

4. Charge roller scar or particle 4. Clean the charge roller.

If not improved,

replace image cartridge.

Partial White Image 1. OPC Drum scar or particle 1. Clean OPC Drum

(not periodic) 2. Check the cartridge life 2. Replace image cartridge

Download Service Manual And Resetter Printer at http://printer1.blogspot.com

Error status Check Solution

1. Check HVPS voltage 1. Refer to HVPS output spec.

- Replace the engine board

2. Check the GND OPC contact. 2. Fix contact points to fit well.

- Contact among GND OPC

contact points.

- Image cartridge.

- GND OPC terminal on frame

- GND OPC terminal on the

No image (all white) engine board

- Confirm the voltage between

GND-OPC and GND-Frame.

: -130V approx

3. Check LSU operation. 3. Replace the LSU.

- Refer to DCU control “05” -Refer to “4-8”

4. Compare new video board 4. Replace the video board.

with present one.

5. Toner empty 5. Replace the image cartridge.

1. Check the charger voltage 1. Refer to HVPS output spec

All Black Image 2. Check the terminal contact - Replace the engine board

3. Compare new video board with 2. Replace terminal

present one 3. Replace video board

Download Service Manual And Resetter Printer at http://printer1.blogspot.com

5-2 HVPS Output Spec

DCU CODE NO. HVPS OUTPUT REMARK

CHARGER “01” - 1.55 KV

TRANSFER “-” “02” -1KV~ -1.4KV

TRANSFER “+” “03” +1.8 KV

BIAS “04” - 500 V

SUPPLY “04” - 700 V

OPC GND

¶°- 130 V

1. Turn off the printer

2. Open the rear cover and disassemble

the cover-shield.

3. Connect the DCU on engine board and

close the rear cover.

4. Open the top cover.

5. Remove image Cartridge.

6. Push the Cover Open Switch

7. Select the Diagnostic mode and

measure HVPS output.

°›Recommanded Test Equipment

- DVM -High Voltage Probe

Download Service Manual And Resetter Printer at http://printer1.blogspot.com

5-3 Malfunction

Error status Check Solution

1. Check FUSE 1. Replace SMPS.

- F1(8A), F2(5A) OPEN. - Refer to “4-12”

No Power 2. Check FUSE. 2. Measure the resistance +5V and GND.

- F3(250V/3A) OPEN. (Engine board CN5-pin6 and CN5-

pin9). If find the short circuit, replace

the Engine board.

1. Check Fuser unit To disassemble the Fuser unit,

- Thermostat open refer to “4-5”.

- hallogen lamp defect 1. If the thermostat of the fuser unit

Normal : 110V version - 2~3

•ÿis opened. replace it.

220V version - 5~6•ÿ

2. Check themistor wire assembly defect. 2. If the thermistor wire of the fuser unit

Internal Error 11 Normal : 2~400k•ÿis defected, replace it.

(Fuser Error) 3. Check SMPS 3. If the fuser unit is normal,

- CN2 conection on SMPS replace SMPS.

- Fuse(F2) open

- Defect of component related to Fuser

control.

4. Check Engine Board 4. If not normal operation after replacing

- CN7 connection it, replace the engine board.

- Fuser control line:

Cn5-2 level (Lamp on : 0.2V, Lamp off:24V)

Check the Cover Open operation 1. Replace cover open Unit

1. Cover open unit defect -Refer to “4-6”

Cover open 2. Cable damage and connection 2. Replace cover open switch

3. Engine board defect assembly, and connect properly.

3. Replace the engine board.

Download Service Manual And Resetter Printer at http://printer1.blogspot.com

Error status Check Solution

1. Check the exit sensor. 1. Replace Exit sensor.

- Refer to DCU mode “08” - Refer to “4-11”

2. Check the exit sensor actuator. 2. Replace Exit sensor actuator.

Jam 2 3. Check the Exit Roller. - Refer to “4-5, 6-6”

“Paper is stopped 4. Check the Cover Rear. 3. Replace Exit Roller.

just after exit sensor” 5. Check the Contamination of Fuser Unit - Refer to “4-3, 6-1”

4. Replace Cover Rear.

- Refer to “6-1”

5. Replace or Clean Fuser Unit

- Refer to “4-5, 6-6”

1. Check the operation of Duplex Clutch 1. Replace Duplex Clutch.

- Refer to DCU mode “12” - Refer to “4-6”

2. Check the Duplex sensor 1. 2. Replace the DS1 on Engine Board.

- Refer to DCU mode “07” 3. Replace Duplex sensor 1 actuator.

Duplex Jam 1 3. Check the Duplex sensor 1 actuator. - Refer to “4-11”

4. Check the Cover Rear. 4. Replace Cover Rear.

5. Check the bracket duplex unit - Refer to “6-1”

6. Check the duplex solenoid. 5. Replace bracket duplex unit

The resistance of duplex solenoid: - Refer to “6-8”

40~50 ohm. 6. Replace duplex solenoid ass’y.

1. Check the Duplex sensor 2. 1. Replace the DS2 on Engine board.

- Refer to DCU mode “07” 2. Replace Duplex sensor actuator.

Duplex Jam 2 2. Check the Duplex sensor 2 actuator. 3. Replace Gear of shield pcb

3. Check the Gear of shield pcb - Refer to “4-11, 6-7”

- Check all the gear for correct installation

1. Check the LED Array. 1. Replace LED Array.

PTL Error 2. Check the cable connection or wire defect. - Refer to “6-2”

(Pre Transfer Lamp) 3. Check Joint board. 2. Replace harness or reconnection.

3. Replace Joint board.

- Refer to Disassembly

1. Check image cartridge life 1. Replace image cartridge.

2. Check Toner sensor contact. 2. Replace harness or reconnection.

Toner Empty 3. Check Joint board 3. Replace Joint board.

4. Compare new image with present on. - Refer to “4-4”

4. Replace image cartridge.

1. Check OUT-BIN sensor. 1. Replace OUT-BIN sensor.

- Refer to DCU mode “09” 2. Replace OUT-BIN sensor

OUT-BIN Full 2. Check OUT-BIN sensor actuator. actuator.

3. Check cable connection or wire defect 3. Connect the cable correctly or replace

the cable.

1. Check the Cable between Engine and 1. Connect the cable correctly or

Internal Error 20 Video controller. replace the cable.

(Engine Error) (Engine board CN10

®MVideo controller - Refer to “4-4”

board J11.) 2. Replace Engine board.

2. Engine board defect.

Download Service Manual And Resetter Printer at http://printer1.blogspot.com

Error status Check Solution

1. Check the DC supply for laser 1. If +5Vs for laser diode isn’t supplied.

scanning unit check the cover switch assembly for

+5Vs and fix it,

Internal Error 10 2. Check laser scanning unit 2. If the DC power supply for laser

(Scanner Error) - Refer to DUC mode “05” scanning unit has normal operation,

replace the laser scanning unit

3. Check the cable connection and defect 3. Replace cable and connect properly.

4. Engine board. 4. If not normal operation after replacing

it, replace the engine board.

1. 1st cassette feeding

1) Check the operation of Pick-up Clutch 1. Replace the Pick-up solenoid on

- Refer to DCU mode “06” Engine Board.

- Refer to “4-11”

2) Check PAD of Pickup roller. 2. Replace PAD.

- Refer to “4-7, 6-5”

3) Check the Gear of Pickup Unit. 3. Replace Pickup Unit Gear.

- Refer to “4-7, 6-5”

4) Check paper installation in cassette 4. Install paper properly.

2. Multi purpose feeding

1) Check the operation of 1. Replace MP solenoid.

multi purpose Clutch If not normal operation after replacing

- Refer to DCU mode “13” it, replace the engine board.

Jam 0 - Check MP solenoid. - Refer to “4-11”.

1. Paper is not The resistance of MP solenoid 70~80

•ÿ2. Replace PAD

exitted from cassette 2) Check PAD of Pickup roller - Refer to “4-9, 6-4”

3) Check Joint board 3. Replace Joint board.

2. Paper is stopped Measure the CN503-2pin - Refer to “4-4”

before feed sensor. 4) Check the Gear of multi Purpose 4. Replace Pickup Unit Gear.

Pickup Unit 5. Connect the cable correctly

5) Check cable connection or wire defect. or replace the cable.

3. Second cassette feeding

1) Check Pickup Clutch for SCF. 1. Replace the pick-up clutch for SCF.

- The resistance of SCF solenoid: 70~80•ÿIf not improved, replace SCF board

2) Check PAD of Pickup roller 2. Replace PAD.

3) Check the Gear of pickup Unit - Refer to “6-11”

4) Check paper installation in cassette. 3. Replace Pickup Unit Gear.

5) Check cable connection or wire defect. - Refer to “6-11”

4. Reinstiall paper properly.

5. Connect the cable correctly, or

replace the cable.

1. Check the Feed sensor. 1. Replace Feed Sensor.

Jam 1 - Refer to DCU mode “08” - Refer to “4-11”

“Paper is stopped 2. Check the Feed Sensor actuator 2. Replace Feed Sensor actuator.

on feed sensor” 3. Check the paper installation in - Refer to “4-11, 6-2”

cassette. 3. Reinstall paper properly.

Download Service Manual And Resetter Printer at http://printer1.blogspot.com

Error status Check Solution

- Refer to DCU mode “00”

1. Check the supply voltage. (+24Vdc) 1. Replace to cover open unit.

Engine board CN1 -2,5 pin 2. Replace cable

2. Check the Motor cable for cuts or 3. Replace Motor.

pinched wiring. 4. Replace Engine board.

Main Motor 3. Check the resistance for Motor between 5. Replace Motor Drive Unit

pin No. 1 to 3(4 to 6) - Refer to “4-6, 6-9”

The resistance of motor : 3

•ÿapprox.

4. Check the Engine board.

5. Check Gear of Motor Drive Unit.

- Check all the gear for correct

installation.

1) 1’st Cassette Feeder

1. Check the paper empty sensor 1. Replace the paper empty sensor on

- Refer to DCU mode “07” Engine board.

2. Check the paper empty sensor actuator. 2. Replace paper empty sensor actuator.

2) Multi Purpose Feeder

1. Check the paper empty sensor for MP. 1. Replace MP sensor assembly.

Paper Empty - Refer to DCU mode “07” 2. Replace MP paper empty sensor

2. Check the MP paper empty sensor actuator.

actuator. If not improved, replace

the engine board

3) Second Cassette Feeder

1. Check the paper empty sensor for SCF 1. Replace the paper empty sensor on

- Refer to DCU mode “07” S.C.F board.

2. Check the paper empty sensing actuator 2. Replace MP paper empty sensor

for SCF. actuator.

Download Service Manual And Resetter Printer at http://printer1.blogspot.com

5-4 .Connector Pin Assignment

5-4-1. Engine Board Connector Pin Assignment

CONNECTOR PIN-NO DESCRIPTION IDLE ACTIVE IN/OUT

1 MOTOR_PB* +24V PULSE O

CN1 2.5 +24V +24V +24V -

MOTOR 3 MOTOR_PB +24V PULSE O

4 MOTOR_PA* +24V PULSE O

6 MOTOR_PA* +24V +24V O

CN2 1 +24V +24V +24V O

DUPLEX 1 D_CLUTCH +24V L -

CN3 1 +24V +24V +24V -

FAN 2 NC NC NC -

3 FAN +24V L O

1 CAST_SENS1 H L I

CN4 2 CAST_SENS2 H L I

CASSETTE 3 CAST_SENS3 H L I

BOARD 4 DGND DGND DNGD -

1 +24VS2 +24V +24V -

2 FUSERON +24V L O

CN5 3,5,7 AGND AGND AGND -

SMPS 4 +5Vs +5V +5V -

6,8,10 +5V +5V +5V -

9,11,12 DGND DGND DGND -

13,14,15,16 +24VS2 +24V +24V -

1,2,3 +5V +5V +5V -

4 MP_CLUTCH L 0.7V O

5 +5Vs +5V +5V -

6 Q_LAMP L 0.7V O

7,9 +24VS2 +24V +24V -

CN6 8 SCF_READY H L I

JOINT BOARD 10 STS_SCF PULSE PULSE I

INTERFACE 11,13 AGND AGND AGND -

12 MP_PAPER H L I

14 TONER H L I

15,17 DGND DGND DGND -

16 CMD_SCF PULSE PULSE O

18 OPT_CLK PULSE PULSE O

CN7 1 THERMISTOR - - -

THERMISTOR 2 THERMISTOR - - -

1 +5V +5V +5V -

CN8 2 DCU_DATA PULSE PULSE I/O

DCU 3 DCU_CLK CLOCK CLOCK O

4 DGND DGND DGND -

Download Service Manual And Resetter Printer at http://printer1.blogspot.com

CONNECTOR PIN-NO DESCRIPTION IDLE ACTIVE IN/OUT

1.4 DGND DGND DNGD -

2 VDO H L O

3 LDON H L O

CN9 5 +5Vs +5V +5V -

LSU 6 HSYNC H L I

7 LREADY H L I

8 PMOTOR +24V L O

9 AGND AGND AGND -

10 +24VS2 +24V +24V -

1 EBUSY H L O

2,17,19,20,21 DGND DGND DNGD -

22,23,24

3 EMSG H L O

4 EXIT_PAP H L O

5 CCLK H PULSE I

CN10 6 PRINT H L I

VIDEO 7 VDI H L I

CONTROLLER 8 CPRDY - -

INTERFACE 9 PSYNC H - O

10 READY H L O

11 HSYNC H L O

12 NC NC NC -

13,15,16,18 +5V +5V +5V -

25,27,28

14 CMSG H I

Download Service Manual And Resetter Printer at http://printer1.blogspot.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Drucker Handbücher

Samsung

Samsung Xpress SL-M2022W Bedienungsanleitung

Samsung

Samsung ML-2150 Bedienungsanleitung

Samsung

Samsung CLP-415N Bedienungsanleitung

Samsung

Samsung ML 2510 - B/W Laser Printer Bedienungsanleitung

Samsung

Samsung CLP-360 Bedienungsanleitung

Samsung

Samsung ML-1430 Bedienungsanleitung

Samsung

Samsung ML-166 Series Bedienungsanleitung

Samsung

Samsung ML-1740/XSH Service-Handbuch

Samsung

Samsung ML-3051ND Betriebsanleitung

Samsung

Samsung SCX-5635FN - Mono Laser P/s/c/f USB Enet 1200X1200 128MB... Bedienungsanleitung

Samsung

Samsung CLX-3160 Series Bedienungsanleitung

Samsung

Samsung ML-1210 Benutzerhandbuch

Samsung

Samsung 2252W - Printer - B/W Benutzerhandbuch

Samsung

Samsung ML-2015/XEV Bedienungsanleitung

Samsung

Samsung SCX-4600 Series Bedienungsanleitung

Samsung

Samsung SCX-1100 Bedienungsanleitung

Samsung

Samsung ML-3312 Series Bedienungsanleitung

Samsung

Samsung CLP 500 Bedienungsanleitung

Samsung

Samsung SRP - 350 Bedienungsanleitung

Samsung

Samsung Multifunction MultiXpress X322 Series Bedienungsanleitung

Samsung

Samsung STP-102P Bedienungsanleitung

Samsung

Samsung ML-4600/XET Bedienungsanleitung

Samsung

Samsung ML-2251N/XAA Bedienungsanleitung

Samsung

Samsung CLP 610ND - Color Laser Printer Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung