Samsung MIM-D00 Bedienungsanleitung

INSTALLATION

MANUAL

MIM-D00

DMS

(Data Management Server)

DB98-29919A(1)EK C

CHINESE ENGLISH

MIM-D00_IM_E_29919-1.indd 29 2008-09-10 ｿﾀﾈﾄ 1:27:35

E-2

Safety Precautions

Read carefully this installation manual before

installation and check if the DMS is installed correctly

after installation.

 Do not attempt to install or repair this DMS by yourself.

This DMS contains no user-serviceable parts.

Always consult authorized service personnel for repairs.

When moving, consult authorized service personnel for

disconnection and installation of the DMS.

Ensure that the wall is strong enough to support the

weight of the DMS.

Must install the DMS with rated power supply.

The DMS must be installed according to

the national electrical rules by an installation specialist.

If you wish to uninstall the DMS, consult an authorized

installation center.

WARNING

CAUTION  Do not use inflammable gases near the DMS.

Do not install the DMS in a location where

it will come into contact with combustible gases,

machine oil, sulphide gas, etc.

Avoid locations where acid/alkali solution or special

spray is used.

Choose a location that is dry and sunny, but not exposed

to direct sunlight. Suitable temperature is between

0°C(32°F) and 39°C(102.2°F).

 Do not spill water into the DMS.

Do not apply tensile strength to the cable to avoid cable

damage.

Do not press the buttons with a sharp object.

Do not connect the power cable to the control terminal.

If the DMS is installed in a hospital or other special

places, it should not affect other electronic devices.

This installation manual describes how to install the DMS. For installation of other

optional accessories, refer to the appropriate installation manual.

MIM-D00_IM_E_29919-1.indd 2 2008-09-10 ｿﾀﾈﾄ 1:27:10

E-3

ENGLISH

Contents

 SAFETY PRECAUTIONS

.....................................................................

 BEFORE INSTALLING THE DMS

......................................................

 ACCESSORIES

.....................................................................................

 PRODUCT DESIGN

............................................................................

 PRODUCT DIMENSIONS

...................................................................

 SYSTEM ARCHITECTURE

...................................................................

 COMPATIBLE DEVICES

......................................................................

 INSTALLING THE DMS

....................................................................

 DMS EXTERNAL DISPLAY

.............................................................

 SETTING THE COMPUTER ENVIRONMENT

......................................

 APPENDIX

.........................................................................................

MIM-D00_IM_E_29919-1.indd 3 2008-09-10 ｿﾀﾈﾄ 1:27:10

E-4

Before installing the DMS(Data Management Server)

The following items need to be prepared before installation.

WARNING

• Only static IP must be used for the DMS. (Public IP or private IP)

The DMS is a server and only static IP must be used. To access the

DMS through the internet or with SNET series, the DMS address,

which is the IP address, must be known. A static IP service from an

internet service provider must be used if xDSL (ADSL, VDSL) is being

used for internet connection. (Static IP costs more than dynamic IP.)

Choosing between a private IP and a public static IP depends on

whether the DMS needs to be controlled from an external location.

General DSL service uses dynamic IP and cannot be used with the

DMS. Refer to page 23~24 for explanation on technical terms.

DMS IP

 A public IP is needed to access the DMS over the internet.

(One public IP is needed for each DMS)

 A private IP may be used if the DMS need not be accessed

over the internet.

 The DMS does not support *DHCP.

Note *DHCP(Dynamic Host Configuration Protocol)

  An Internet protocol for automating the

configuration of computers that use TCP/IP.

DHCP is used to automatically assign IP addresses.

In other words, the IP address of the host is supported

only when the PC is on.

NETWORK RELATED EQUIPMENTS

 Network equipments such as HUBs and network cables

are not provided by Samsung.

INSTALLATION NOTICE

 The DMS is recommended to be wall-mounted to prevent

damage to the product and for safety issues.

 The LAN cable and the communication cables(C1,C2)

from the centralized controllers must be installed

in such a way that the wires can be connected to

the DMS with ease.

MIM-D00_IM_E_29919-1.indd 4 2008-09-10 ｿﾀﾈﾄ 1:27:10

E-5

ENGLISH

Accessories

DMS(1)

Cable Tie (2) Cable Clamp(3) M4X16 Screw(5)

Rubber Hook(4)

User's manual

(1)

Installation manual

(1)



The DMS must be installed by a trained installer.



Ensure the main power is turned off before installing

the DMS.



The power cable and the communication cable must

be installed according to the national electrical wiring

regulations. (VCTF 2C x 0.75mm2 must be used for the

communication and power cables)



Ensure the cables are out of user’s reach.

Caution

Product Design

MIM-D00_IM_E_29919-1.indd 5 2008-09-10 ｿﾀﾈﾄ 1:27:11

E-6

Product Dimensions

Unit : mm

 Installation Method

Fix the provided screws to the wall and use the four holes on the back of

the DMS to hang the DMS on the wall.

219

150

10 10 10

135

135 20

130

Serial Port

LAN Port

Reset Button

Power Input

MIM-D00_IM_E_29919-1.indd 6 2008-09-10 ｿﾀﾈﾄ 1:27:13

E-7

ENGLISH

System Architecture

Note Products with ‘*’ are not Samsung products and must be

purchased separately.

S-NET 3

* HUB



Network related

equipments to be

purchased separately

Centralized

Controller

Centralized

Controller

SIM I/M

Transmitter Transmitter Transmitter

* Power meter

Power related

equipments to

be purchased

separately

Connect one power meter to

N number of outdoor units.

Make sure the power meter

capacity is greater than the

total capacity of the outdoor

units.

DMS

MIM-D00_IM_E_29919-1.indd 7 2008-09-10 ｿﾀﾈﾄ 1:27:14

E-8

Compatible Devices

No. Devices Model Note

1Indoor Unit

Outdoor Unit

All System indoor/outdoor units

such as: DVM, DVMH models,

DVM PLUS, DVM PLUS ΙΙ/ΙΙΙ,

MINI DVM, HOME DVM,

CAC models

2Interface

Module

MIM-B04A(for DVM, DVM PLUS etc.)

MIM-B13(for DVM PLUS ΙΙ etc.)

MIM-B13A(for DVM PLUS ΙΙ, ΙΙΙ etc.)

3Centralized

Controller

MCM-A202

MCM-A202A -

4 SIM I/M MIM-B12 Needed for power distribution

*5 Watt-hour

Meter RS485 comm. type

Needed for power distribution

( Please consult Samsung for

compatible power meters)

Note Products with ‘* ’ are not Samsung products and must be purchased separately.

(Only selected power meters may be used for protocol compatibility issues.)

Maximum Devices attachable

The maximum number of devices attachable to the DMS is as follow:

Devices Max. Note

Centralized Controller 16 Must not exceed 16

Indoor Unit 256 Tracking error occurs if exceeded

SIM I/M 8 -

Watt-hour Meter 64 8 power meters for each SIM I/M

MIM-D00_IM_E_29919-1.indd 8 2008-09-10 ｿﾀﾈﾄ 1:27:16

E-9

ENGLISH

Installing the DMS

Connecting the Centralized Controller

The centralized controllers must be installed to control the

indoor units.

Loosen the two screws on the bottom of the DMS front

cover.

Hold the bottom two sides of the DMS and push upwards

to slide open the cover. (Sliding type cover)

Connect the provided power cable to the power terminal.

Connect the C1, C2 communication cable from the

centralized controller to the J1 terminal of the DMS.

(Communication will fail if the cable is not connected

properly.)

Connect the LAN cable to the J6 terminal of the DMS.

6Close the case cover after making sure the power cable is

not pressed.

Assemble the cover as shown in the picture to avoid

exposure of the stripped wires.



Maximum 16 centralized controllers can be connected

to one DMS.



Separate the power cable and the communication cable

when installing the DMS. (The DMS may malfunction

due to electrical disturbance.)

Caution

POWER CABLE

Centralized controller

communication cable

LAN CABLE

MIM-D00_IM_E_29919-1.indd 9 2008-09-10 ｿﾀﾈﾄ 1:27:17

E-10

Installing the DMS (Continued)

Connecting the SIM I/M

The SIM I/M must be used for the power distribution function.

Loosen the two screws on the bottom of the DMS front

cover.

2Hold the bottom two sides of the DMS and push upwards

to slide open the cover. (Sliding type cover)

Connect the provided power cable to the power terminal.

Connect the C1,C2 communication cable from the SIM I/M

to the J1 terminal of the DMS.

(Communication will fail if the cable is notconnected

properly.)

MIM-D00_IM_E_29919-1.indd 10 2008-09-10 ｿﾀﾈﾄ 1:27:19

Andere Handbücher für MIM-D00

Inhaltsverzeichnis

Andere Samsung Server Handbücher

Samsung

Samsung ML-2010 - B/W Laser Printer Bedienungsanleitung

Samsung

Samsung Webthru SWC 306 Bedienungsanleitung

Samsung

Samsung IPX-S300B Benutzerhandbuch

Samsung

Samsung SNT-1010 Bedienungsanleitung

Samsung

Samsung TC222L Bedienungsanleitung

Samsung

Samsung MIM-D00 Bedienungsanleitung

Samsung

Samsung SRD-1670DC Bedienungsanleitung

Samsung

Samsung MIM-D00 Bedienungsanleitung

Samsung

Samsung SmartServer 3840 Bedienungsanleitung

Samsung

Samsung SMARTSERVER 370 Bedienungsanleitung

Samsung

Samsung OfficeServ 7200 Bedienungsanleitung

Samsung

Samsung SNT-1010 Bedienungsanleitung

Samsung

Samsung SBB-SNOWJAU Bedienungsanleitung

Samsung

Samsung SNS-100/400 Bedienungsanleitung

Samsung

Samsung SPE-400 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung