Samsung HW-K650 Bedienungsanleitung

User Manual

HW-K650

HW-K651

For further information, refer to the Web Manual.

Web manual : www.Samsung.com →Support →

Product name search →HW-K650 or HW-K651

· 2 · English

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that high voltage is

present inside. It is dangerous to make any

kind of contact with any internal part of this

product.

This symbol indicates that important literature

concerning operation and maintenance has

been included with this product.

Class II product : This symbol indicates that it does not require a safety connection to electrical

earth (ground).

AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC

voltage.

DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC

voltage.

Caution, Consult instructions for use : This symbol instructs the user to consult the user

manual for further safety related information.

WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

• This apparatus shall always be connected to a AC outlet with a protective grounding connection.

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the

mains plug shall be readily operable.

CAUTION

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on

the apparatus.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the

power plug must be easily and readily accessible at all times.

· 3 · English

PRECAUTIONS

1. Ensure that the AC power supply in your house complies with the power requirements listed on the identification

sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with

enough space around it for ventilation (7~10 cm). Make sure the ventilation slots are not covered. Do not place the

unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn

off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long

period of time.

2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage

the unit.

3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit

to malfunction.

4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong

magnetic or electric fields. Disconnect the power cable from the AC supply if the unit malfunctions. Your product is

not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored

in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached

room temperature before using.

5. The batteries used with this product contain chemicals that are harmful to the environment.

Do not dispose of batteries in the general household trash. Do not dispose of batteries in a fire. Do not short circuit,

disassemble, or overheat the batteries. There is a danger of explosion if the battery is incorrectly replaced. Replace

only with the same or equivalent type.

WARNING, DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD,

The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is

swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries

away from children. If the battery compartment does not close securely, stop using the product and keep it away from

children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate

medical attention.

· 4 · English

CHECKING THE COMPONENTS

Right Side of the Soundbar

Soundbar Main Unit

Top

2AC/DC Adapter

3Power Cord

Remote Control /

Battery Subwoofer Optical Cable

1Power Cord

cMicro USB to USB adapter and HDMI cables are sold separately.

To purchase, contact a Samsung Service Centre or Samsung Customer Care.

CONNECTING ELECTRICAL POWER

Use the power components (1, 2, 3) to connect the power supplies in the following order:

Subwoofer Soundbar Main Unit

cFor more information about the power supply and power consumption, refer to the label attached to the

product. (Label : Bottom of Soundbar main unit)

POWER

Connecting

electrical power

MI IN

I OUT

ARC)

DC 24V

2 AC/DC Adapter

DC 24V (Power Jack)

3Power Cord

Bottom of the Soundbar Main UnitRear of Subwoofer

1Power Cord

cMake sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it is

hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter

and cause the Adapter to malfunction.

· 5 · English

CONNECTING THE SUBWOOFER TO THE SOUNDBAR

MAIN UNIT

You can enjoy rich bass tones and better sound quality by linking the subwoofer to the Soundbar main unit.

Soundbar Main Unit

Subwoofer

The Soundbar main unit and subwoofer should link (connect wirelessly) automatically when the Soundbar main

unit and subwoofer are turned on. When auto-connection is complete, the blue indicator on the front of the

subwoofer stops blinking and glows blue continuously.

cIf the indicator on the front of the subwoofer displays in red or flashes in blue, the subwoofer has not

automatically connected. If this occurs, follow the directions below to connect the subwoofer manually.

cImportant: Before you begin, put the battery into the remote. See page 17 for instructions.

POWER

1. Plug the power cords of the Soundbar main unit and subwoofer into an AC wall outlet.

2. Press the ID SET button on the back of the subwoofer for 5 seconds.

The red indicator on the front of the subwoofer turns off and the blue indicator flashes rapidly.

3. Press the button on your remote control for 5 seconds while the Soundbar main unit is turned OFF.

4. The ID SET message appears on the display of the Soundbar main unit for a short period of time, and then

disappears.

ID SET

5. While the subwoofer's indicator is flashing blue, press the button on your remote control or on the right

side of Soundbar main unit to turn on the Soundbar main unit.

6. The connection is complete if the indicator on the front of the subwoofer stops flashing and glows

continuously.

cIf the connection process fails, the blue indicator will flash continuously. Go to Step 2 and start again.

· 6 · English

CONNECTING TO YOUR TV

You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.

cImportant: Before you begin, put the battery into the remote. See page 17 for instructions.

Method 1. Connecting with a Cable

DIGITAL AUDIO IN

(OPTICAL)

Soundbar

Bottom of Soundbar

OPTICAL OUT Optical Cable

Check the DIGITAL AUDIO IN

(OPTICAL) port of the

Soundbar main unit.

Check the OPTICAL OUT

port of your TV.

1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with

a digital optical cable.

2. Press the button on the right side of the Soundbar or the SOURCE button on the remote control to

select the D.IN mode.

D.IN

cIf TV sound is not output, press the button on the right side of your Soundbar or the SOURCE button

on the remote control to select the D.IN mode on Soundbar main unit display.

cIf the Soundbar main unit display does not change to D.IN, disconnect the HDMI cable.

cPress the button on the remote control for five seconds to turn Auto Power Link on or off.

(Auto Power Link is set to ON by default.)

· 7 · English

Method 2. TV SoundConnect (Linking to a Samsung TV with Bluetooth)

1. Turn on your Samsung TV and the Soundbar.

2. Select TV mode in your Soundbar display by pressing the button on the right side of the Soundbar or

the SOURCE button on your remote control. (Modes are displayed in the following order: D.IN →AUX →

HDMI →BT →TV.)

3. When the connection message shown below appears on the TV screen, select <Yes> with your TV remote

control.

Samsung Audio Device detected.

Do you want to hear TV sound

through this device?

Yes No

Select <Yes> with your TV remote control.

4. The Soundbar outputs TV sound.

cIf the TV SoundConnect linking process fails, navigate to SoundConnect in the TV's Sound menu, select

Add New Device, and set Add New Device to ON. Then, try again.

cIf your Soundbar is connected to your TV through TV SoundConnect, you can conveniently control the volume

with the Soundbar's remote or the TV's remote. You can also have the Soundbar turn on and off automatically

when you turn the TV on or off by setting the Bluetooth POWER On function to On. See page 18.

cThe TV SoundConnect (Soundshare) function is only available in some Samsung TV products released since 2012.

cIf you want to disconnect the existing connection to your TV and establish a new connection to another TV,

press the &button on your remote control for more than 5 seconds.

cIn the TV SoundConnect mode, the Soundbar cannot be paired to another Bluetooth device.

cDo not place electronic devices or metallic objects on top of the product.

e.g., Wired/wireless router, set-top box, or modem.

cPlacing the product on the floor may degrade wireless network performance, depending on the floor material.

· 8 · English

Method 3. Connecting to a Wireless Network

Installing the Samsung Multiroom App and Connecting Wirelessly

To install Samsung Multiroom app for the first time, follow the

steps shown below.

1. Press and hold the SPK ADD button on the bottom of the

Soundbar for more than 1 second.

• There is a notification sound and the message

“ADD SPEAKER” appears on the Soundbar’s main

unit. Afterwards, the message “WIFI READY” appears when

standby-for-connection mode activates.

2. Connect your smart device (smart phone, tablet, etc.) to your wireless router.

Samsung

Multiroom

Internet Wireless Router Smart Device

3. Install the Samsung Multiroom app on your smart device (smart phone, tablet, etc.).

4. Launch the Samsung Multiroom app.

Android iOS

Samsung Multiroom app

Samsung

Multiroom

5. Complete the initial settings by following the instructions on the app screen.

Complete the settings

by following the

instructions on the

Samsung Multiroom

app screen.

Start screen Entering the password

for the wireless router Speaker connection

complete

cYou must enter the password of your wireless router to connect your Soundbar to your wireless network

through Samsung Multiroom app.

cIf your wireless router has no designated password, the app completes the initial settings without asking you

to enter a password.

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

AUX IN

HDMI IN

HDMI OUT

(TV-ARC)

DC 24V

Wi-Fi SETUP SPK ADD

Bottom of Soundbar

· 9 · English

Adding the Soundbar to an Existing Multiroom Audio System

If the Samsung Multiroom app is already installed for use with

another multiroom audio device, follow these steps to add the

Soundbar.

1. Press and hold the SPK ADD button on the bottom of the

Soundbar for more than 1 second.

• There is a notification sound and the message

“ADD SPEAKER” appears on the Soundbar’s main

unit. Afterwards, the message “WIFI READY” appears

when standby-for-connection mode activates.

2. Connect your smart device (smart phone, tablet, etc.) to your wireless router.

Samsung

Multiroom

Internet Wireless Router Smart Device

3. Launch the Samsung Multiroom app.

4. Touch to go to the list of all speakers.

5. Select More > Add New Speaker in the app, and then follow the instructions on the app screen.

Complete the settings

by following the

instructions on the

Samsung Multiroom

app screen.

Start screen Selection of network Speaker addition

complete

cTo connect a different network, select No.

You must enter the password of your wireless router to connect your Soundbar to your wireless network

through the Samsung Multiroom app.

If your wireless router does not have a designated password, the app completes the initial settings without

asking you to enter a password.

DIGITAL AUDIO IN

(OPTICAL)

SERVICE

AUX IN

HDMI IN

HDMI OUT

(TV-ARC)

DC 24V

Wi-Fi SETUP SPK ADD

Bottom of Soundbar

· 10 · English

Connecting the Soundbar to your Samsung Smart TV

You can connect your TV to the Soundbar through a wireless network and enjoy the TV sound.

cImportant: Make sure that the TV and Soundbar are connected to the same network.

(How to check your Samsung TV network : Home menu Network Network Status)

Configuring Settings from your Samsung Smart TV

cTo play sound via the Soundbar, make sure that your TV model supports the Multiroom feature

(Samsung Smart TVs released after 2014).

cIf the TV is disconnected from the wireless network due to a change to the input source of the Soundbar,

use the TV menu to re-establish the connection.

For TVs released in 2016

1. Home menu Settings ( ) Sound Sound Output Select [AV] Samsung Soundbar Kxxx (Wi-Fi)

2. TV sound is output.

For TVs released in 2015

1. Home menu



Sound

 Speaker List 

Select [AV] Samsung Soundbar Kxxx (Wi-Fi)

2. TV sound is output.

For TVs released in 2014

1. Home menu



Sound

 Speaker Settings 

Select

Multiroom Link - Settings  Soundbar+Surround

2. From the Soundbar position, select "K650" and select "OK".

3. Home menu



Sound

 Speaker Settings 

Select

TV Sound Output  Multiroom Link

TV Speaker

•

TV Installation Type

Stand

TV SoundConnect

• Samsung Audio Device List

• Add New Device On

Multiroom Link

• Settings

Soundbar+Surround

Bluetooth headphone

• Bluetooth headphone List

Speaker Settings

TV Sound Output Multiroom Link

󱂕

󱂓

Multiroom Link

OK Volume Level Speaker Test

Soundbar

[AV] Samsung Soundbar K650

Soundbar+Surround

[AV] Samsung Soundbar K650

Don't Use

󱂔

Edit Na

4. TV sound is output.

Andere Handbücher für HW-K650

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Lautsprechersystem Handbücher

Samsung

Samsung HW-N400/ZA Montageanleitung

Samsung

Samsung HW-K960 Bedienungsanleitung

Samsung

Samsung HW-R450 Bedienungsanleitung

Samsung

Samsung HW-N400 Bedienungsanleitung

Samsung

Samsung HW-A50C Montageanleitung

Samsung

Samsung HW-K360 Bedienungsanleitung

Samsung

Samsung Crystal Surround Air Track HW-F750 Bedienungsanleitung

Samsung

Samsung HW-M4500 Montageanleitung

Samsung

Samsung HW-N950 Montageanleitung

Samsung

Samsung HW-KM36 Bedienungsanleitung

Samsung

Samsung MX-T70 Montageanleitung

Samsung

Samsung HW-H550 Bedienungsanleitung

Samsung

Samsung HW-K560 Bedienungsanleitung

Samsung

Samsung HW-K950 Bedienungsanleitung

Samsung

Samsung HW-J550 Bedienungsanleitung

Samsung

Samsung HW-J7500R Bedienungsanleitung

Samsung

Samsung TW-J5500/ZA Bedienungsanleitung

Samsung

Samsung 6 series Montageanleitung

Samsung

Samsung HW-Q900T Montageanleitung

Samsung

Samsung 2020 T Series Montageanleitung

Samsung

Samsung HW-J8500 Bedienungsanleitung

Samsung

Samsung HW-Q930C Bedienungsanleitung

Samsung

Samsung HW-N400 Bedienungsanleitung

Samsung

Samsung HWR450XY Montageanleitung

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

LG NB4532B Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung